I make a Sheepshank Knot by Bending Rebar

I make a Sheepshank Knot by Bending Rebar - Rebar Metal Art Project.

Рет қаралды 15,846

2 жыл бұрын

I make a Sheepshank Knot by bending Rebar, Rebar Metal Art Project. It is 12 mm (1/2" inch) Rebar
This Sheepshank knot will be used in a future Industrial Style project. I love the look of industrial-style furniture and rebar with knots fits right in with the look I like.
I hope you enjoy my video of making this Sheepshank knot, it was a lot of fun to make.
The main tools used were an LPG Burner, an angle grinder, and a bench vise.
Tools / Supplies, I often use are.
Marking out Tools
Markal Silver-Streak Metal Marker Round: amzn.to/3mTJDHt
Milwaukee 4pk Inkzall Black Ultra Fine Point Pens: amzn.to/2WKKpeE
Milwaukee Inkzall Jobsite Fine Point Black Permanent Marker 12 Pack: amzn.to/3kHrXfo
Locking Pliers - Vise Grips
MILWAUKEE 10” Locking Pliers, Curved Jaw: amzn.to/3zzJH2u
Milwaukee 6" Long Nose Locking Pliers: amzn.to/3jyVLeS
Milwaukee 6” Locking Clamp Regular Jaws: amzn.to/3jB94eI
KNIPEX Tools Long Nose Grip Pliers: amzn.to/3ByD1SP
Magnets
Magnetic V-Pads Kit, Magnets On Both Pad Face & Bottom: amzn.to/3DCya4W
Mini Magnetic Fabrication Square Magnets Angles: 30°, 60°, 45°, 90°: amzn.to/2WN9Fkr
“L” shape Corner Square Magnets 12°, 90° & 60° Angle Setting: amzn.to/2YaZXsU
My camera set-up.
Canon EOS M6 Mark II Camera 15-45mm Lens: amzn.to/3DNnn83
VideoMicro Rode Compact On-Camera Microphone: amzn.to/3QkUBnK
Camera Tripod Vanguard Alta Pro 2: amzn.to/3yB8hP5
The Brand of the Drill bits, and cutting/flap discs, is "Alpha" If you can't get them at your local hardware shop, here is a link to Alpha Tools: alphatools.com.au
As an Amazon Associate, I earn from qualifying purchases. This means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows me to continue to make more videos like this one. Thank you very much for your support!
►►Subscribe to our Channel for more videos ►► bit.ly/2ULxLJogavinclark
Always use all the correct safety gear, and use your tools safely, I am not a good role model for this.
Hope you found something of use in my video or at least found it entertaining.
Gavin Clark DIY

Пікірлер: 132

@TheXanthoman 2 жыл бұрын

I never would have thought that was possible , looks like one of the harder ones you have done .

@GavinClarkdiy 2 жыл бұрын

Thank you very much, yes it was one of the more difficult knots I have done. Thank you for your comment.

@adnacraigo6590 2 жыл бұрын

You must have the most extensive collection of hand made steel knots on the planet.

@GavinClarkdiy 2 жыл бұрын

I do have a few here, I find them very relaxing and interesting to make, I enjoy making them. Thank you for your comment Adna.

@user-gi5on5ey4m 2 жыл бұрын

Yeees!New video!Fantastic,amazing job!Bending cold rebar-not easy...

@GavinClarkdiy 2 жыл бұрын

Thank you very much, I appreciate your comment.

@t4ctwin946 2 жыл бұрын

I probably have all the same tools as you, so I thought I'd try one of these projects. I have all the tools, but now I also have a greater respect for your work.

@GavinClarkdiy 2 жыл бұрын

Thank you very much, I appreciate your comment, as with everything, sometimes it is just the amount of time/years we spend doing things that makes the difference in the outcome, everything we do improves us just that little bit. I wish you the best for your future projects.

@rusosure7 Жыл бұрын

Bowline, Sheet Bend, Clove Hitch, and now the Sheepshank. All knots I learned as a kid nearly 50 years ago. 👍

@GavinClarkdiy Жыл бұрын

Thank you very much. Yes knots are things I learned too many years ago.

@SouLusta 2 жыл бұрын

God bless you, your hand`s and your family. All goodness to you, with love from Free Ukraine!

@GavinClarkdiy 2 жыл бұрын

Thank you very much, I am happy that you liked it. Keep safe, Greetings from Australia.

@MadDog101 2 жыл бұрын

You should be running courses or doing travelling shows. That RM belt buckle you did a while back was a classic !

@GavinClarkdiy 2 жыл бұрын

Thank you very much, I appreciate your comment.

@douglasfathers4848 2 жыл бұрын

Nice one Gavin , good to see some heat been used now all you need is a forge and anvil . :)

@GavinClarkdiy 2 жыл бұрын

Thank you very much, I am glad you liked it Douglas, who knows what the future holds.

@bradleytuckwell4881 2 жыл бұрын

It’s amazing how you get it to look like a piece of rope. You are the man of steel just without the tights. Thanks again for sharing

@GavinClarkdiy 2 жыл бұрын

Thank you very much, I appreciate your comment Brad.

@bradthurkle7217 2 жыл бұрын

Nice Gav. Looks unreal👍

@GavinClarkdiy 2 жыл бұрын

Thank you very much Brad

@stevegarcia5106 2 жыл бұрын

Nice one Gavin. The sheepshank is a hard knot to recreate in 1/2" rebar, as usual you made it look easy. I really enjoy your videos, keep them coming. 🍻

@GavinClarkdiy 2 жыл бұрын

Thank you very much Steve, I appreciate your comment.

@edgor3224 2 жыл бұрын

Идеально!!! Ровно, симметрично!!!

@GavinClarkdiy 2 жыл бұрын

Большое спасибо, я ценю ваш комментарий.

@jasonturner1045 2 жыл бұрын

these re-bar projects really are pieces of art. nicely done.

@GavinClarkdiy 2 жыл бұрын

Thank you very much, I appreciate your comment.

@EiderJChavesC2 Жыл бұрын

Awesome!. Thank you for sharing.

@GavinClarkdiy Жыл бұрын

Thank you very much Eider.

@edgardovieito5043 2 жыл бұрын

Increible!

@GavinClarkdiy 2 жыл бұрын

Thank you very much.

@aux1z11 2 жыл бұрын

Awesome work

@GavinClarkdiy 2 жыл бұрын

Thank you very much, I am glad you liked it.

@tips8762 2 жыл бұрын

A whole beautiful art

@GavinClarkdiy 2 жыл бұрын

Thank you very much.

@KoaAlias 2 жыл бұрын

Looks so simple and the result is wonderful. Chapeau

@GavinClarkdiy 2 жыл бұрын

Thank you very much, I appreciate your comment.

@guillermodelamora5873 2 жыл бұрын

Excelente como siempre.

@GavinClarkdiy 2 жыл бұрын

Muchas gracias, agradezco tu comentario.

@Goalsplus 2 жыл бұрын

No way! Fantastic job!

@GavinClarkdiy 2 жыл бұрын

Thank you very much, I appreciate your comment.

@als8326 2 жыл бұрын

Always enjoy your videos watching you bend the rebar into interesting Nots and functional items

@GavinClarkdiy 2 жыл бұрын

Thank you very much, I appreciate your comment.

@kulibinAS. 2 жыл бұрын

Привет мастерство не пропёш по русски говорится. Молодец наш возрост ещё молодёжь обгоним класс здоровья тебе и удачи в делах. 👍👍👍👍👍🤝🤝🤝😁

@GavinClarkdiy 2 жыл бұрын

Большое спасибо, я ценю ваш комментарий. Привет из Австралии.

@kulibinAS. 2 жыл бұрын

@@GavinClarkdiy Австралии большой привет с России и с озера Байкала! 🤝🤝🤝🤝🤝😁

@kulibinAS. 2 жыл бұрын

@@GavinClarkdiy да малость с делами разгребусь буду делать полочку в прихожую по твоим идеям. Сделаю вам сообщу кагда на канал выйдет. Если ютуб не закроёт для нас., 🤝🤝🤝

@GavinClarkdiy 2 жыл бұрын

@@kulibinAS. Большое спасибо, привет из Австралии.

@GavinClarkdiy 2 жыл бұрын

@@kulibinAS. Звучит как хороший план, я желаю вам всего наилучшего.

@johncapps5044 2 жыл бұрын

Heat it and beat it! Fine work brother.

@GavinClarkdiy 2 жыл бұрын

Thank you very much John, I appreciate your comment.

@MrNovruz 2 жыл бұрын

Cool

@GavinClarkdiy 2 жыл бұрын

Thank you very much.

@mr.ranyhomemade2466 2 жыл бұрын

You are really artist man how to make and bending metal simply 👍🏻👍🏻👍🏻💪

@GavinClarkdiy 2 жыл бұрын

Thank you very much, I appreciate your comment.

@bomomed8579 2 жыл бұрын

Good job

@GavinClarkdiy 2 жыл бұрын

Thank you very much.

@jagdishsarvaiya6651 2 жыл бұрын

It is too hard to do, but looks so easy in your hand. Great.

@GavinClarkdiy 2 жыл бұрын

Thank you very much, I appreciate your comment.

@marcopaz2061 2 жыл бұрын

Gosto muito do seu trabalho, uma verdadeira inspiração, continue assim...

@GavinClarkdiy 2 жыл бұрын

Muito obrigado, agradeço seu comentário.

@paullang1961 2 жыл бұрын

On ya Gav another good one mate cheers bud

@GavinClarkdiy 2 жыл бұрын

Thank you very much Paul cheers mate.

@mimounelaz8847 2 жыл бұрын

Hi Gavin you are an artist I liké what you are doing and thé way you are doing it Salutations from Morocco

@GavinClarkdiy 2 жыл бұрын

Thank you very much, I am happy that you liked it. Greetings from Australia.

@earlcavenaugh6459 2 жыл бұрын

Nice work Gavin!

@GavinClarkdiy 2 жыл бұрын

Thank you very much Earl.

@goptools 2 жыл бұрын

Hi Gavin, Another cool knot! Look forward to seeing the industrial piece of art that you use it on. Also, love the disclaimer. I think you're a good role model because no one else makes knots from rebar like this on youtube (at least I haven't seen any). Thanks for the video! -mike

@GavinClarkdiy 2 жыл бұрын

Thank you very much, I am glad you liked it. I appreciate your comment.

@familiaquepescaMt78280962 2 жыл бұрын

Bela arte, lindo parabéns..!!!

@GavinClarkdiy 2 жыл бұрын

Muito obrigado, fico feliz que tenha gostado.

@lionelyork4960 2 жыл бұрын

Bonjour 🇨🇵 '' bravo l'artiste! 👏👏👏🍾👍🔊''

@GavinClarkdiy 2 жыл бұрын

Merci beaucoup, je suis heureux que cela vous ait plu.

@viorsa8200 2 жыл бұрын

Magnífico tutorial Gavin , otro estupendo nudo en cabilla corrugada , apoyándose un poco en el soplete , para obtener un magnífico resultado final , como si fuera una cuerda , gracias por compartir sus conocimientos y experiencias , un saludo cordial y por supuesto un gran like desde Narón (Galicia) 🤓 🔝

@GavinClarkdiy 2 жыл бұрын

Muchas gracias, me alegra que te haya gustado, y agradezco tu comentario. Saludos desde Australia.

@davidwarland2680 Жыл бұрын

Gavin, I asked you to do this so long ago, wow, brilliant, stunning really. Well done mate, did not think it possibe, you make it look like eating a cream bun.

@GavinClarkdiy Жыл бұрын

Thank you very much David, I did have to get the heat out for this one, I appreciate your lovely comment, I am very happy that you liked it, thanks for the suggestion.

@osvaldopindasp1839 2 жыл бұрын

BOM trabalho 👍

@GavinClarkdiy 2 жыл бұрын

Muito obrigado.

@garyjones2582 2 жыл бұрын

I couldn't do that with a piece of rope, much less rebar..lol.. take care my friend and God Bless...

@GavinClarkdiy 2 жыл бұрын

Hahaha, Thank you very much, I appreciate your comment.

@promiscuous5761 2 жыл бұрын

Thank you.

@GavinClarkdiy 2 жыл бұрын

Thank you very much, I am glad you liked it.

@baudgaud 2 жыл бұрын

08:05 - Gavin gets me every time. Clear blue sky and suddenly I am laughing really hard! "I am not a good role model for this!"

@GavinClarkdiy 2 жыл бұрын

Hahaha, thank you Baudaud, it did stop most of the (You will get hurt doing it that way/ that is unsafe/ you are wearing the wrong safety gear) comments. Most people are just trying to be helpful.

@baudgaud 2 жыл бұрын

@@GavinClarkdiy I understand the point of your disclaimer. It is your presentation, randomly injected into work documentation, which tickles me! Plus you do some awesome work. I bought some rebar last year with the intention of braiding it to make a sturdy coat-rack, and while looking at how to bend and braid steel I stumbled over your channel. I am especially impressed with your jigless techniques. I think most of the people making those safety remarks are just plain dicks. A few months ago I posted a comment to another fabricating channel, asking how/why it was safe to grab the subject with the welding ground attached and the wire in contact, but that presenter is not English-fluent so they took my question as criticism. I just wanted to know what I was missing, because I had the impression that the whole work-piece would be energized with 2-3 amps. So there is obviously a lot of that kind of thing going on.

@GavinClarkdiy 2 жыл бұрын

@@baudgaud Thank you very much, I appreciate your comment. I don't mind the comments trying to save me from myself, but they do take up time and I try to answer every comment I get. I also don't want anyone to do something that may get them hurt, by copying me doing something the "wrong" way. So that just might make them think about safety, I know my tools very well and some people are just starting to use tools. I appreciate your input, keep safe I wish you the best for your projects.

@baudgaud 2 жыл бұрын

@@GavinClarkdiy I have several facial scars. Not a single one came from copying a KZfaq procedure! :-D

@GavinClarkdiy 2 жыл бұрын

@@baudgaud All my scars were my fault, and like you not from watching youtube.

@claudioroberto7946 2 жыл бұрын

Top hemmm, espetáculo.

@GavinClarkdiy 2 жыл бұрын

Muito obrigado.

@chonpiras2815 2 жыл бұрын

chingon

@oscarcabrera1320 2 жыл бұрын

👏👏👏💪💪

@Almously 2 жыл бұрын

All goodness to you

@GavinClarkdiy 2 жыл бұрын

Thank you very much.

@markc5593 2 жыл бұрын

Always looks near impossible to me until you make it.

@GavinClarkdiy 2 жыл бұрын

Thank you very much, I appreciate your comment.

@Mr.LA562 Жыл бұрын

Got to sell these bad boys

@GavinClarkdiy Жыл бұрын

Yes there seems to be a market for them. Thanks Rob.

@user-tr6kh9mz1k 7 күн бұрын

G'day Gavin. Enjoy your channel mate. Wanting to have a crack at some of your projects but cannot find 7mm rebar anywhere in Queensland. Any tips where to look please.

@yorkshirejoinery2869 2 жыл бұрын

These are getting very complex now, but another great build! What are your thoughts on a rebar ‘Turk’s Head’. The ball like knot used to add weight to the end of a rope for throwing? Would look cool, but think you might need to find a fabricated solution.

@GavinClarkdiy 2 жыл бұрын

Thank you very much, I am glad you liked it. I have the 'Turk’s Head' on my list of ideas, that will be a tough one, one day I will have a play and see how I go. Thank you for your suggestion I appreciate it.

@yorkshirejoinery2869 2 жыл бұрын

I might mean a ‘monkey’s fist’! But suppose ‘great minds’!

@GavinClarkdiy 2 жыл бұрын

@@yorkshirejoinery2869 I was thinking Monkey fist (I do have both on my list anyway), you are right we are thinking along the same lines.

@notahotshot Жыл бұрын

Amazing work. After seeing this, I wonder if you think you could manage an alpine butterfly loop?

@GavinClarkdiy Жыл бұрын

Thank you very much, I am glad you liked it. To do a alpine butterfly loop would be a pain I think, so I think I will have to say no to that one. I did put it on my list, but I don't think I will do it. Thank you for the idea.

@notahotshot Жыл бұрын

@@GavinClarkdiy I figured it would be really hard to do. The question was mostly in jest. There are a great many knots that would be near or completely impossible in rebar, especially without heat. The knots you have done are amazing though.

@GavinClarkdiy Жыл бұрын

@@notahotshot It is nice to get ideas that make you think, how can that be done, Cheers notahotshot.

@mohammedkhader3289 2 жыл бұрын

تحياتي لى كل مبدع روعه 👍👍👍🌹🌹🕊🇸🇩🇸🇩 1\5\2022》《30رمضان 1443 أم درما ني سوداني

@regsparkes6507 2 жыл бұрын

Nice one again Gavin, by the way, what was the total length of the re-bar that you used for this knot?

@GavinClarkdiy 2 жыл бұрын

Thank you very much Reg, I have just measured it, 160cm (63 inches) (That's what is in the finished knot.)

@regsparkes6507 2 жыл бұрын

@@GavinClarkdiy Thanks for taking the time to measure, I would have bet oit was longer than that. Nice work, and I appreciate being able to watch the process.

@GavinClarkdiy 2 жыл бұрын

The rebar was about 250cm (100inches) when I started, and the final knot had 160cm (63 inches) in it, the rest was offcuts. Thanks Reg I am glad you liked it.

@geniuspharmacist Жыл бұрын

There's a report that Gavin Clark laces his shoes with rebar.

@GavinClarkdiy Жыл бұрын

It's hard to untie them, I don't think it will become a fad. Hahaha I love your comment. Cheers

@coggsy3036 2 жыл бұрын

Nooooooo not more knots gavin😱😱🤦‍♂️🤦‍♂️🤦‍♂️🤦‍♂️🤦‍♂️

@GavinClarkdiy 2 жыл бұрын

Hahaha, Sorry mate I could not help myself, the thought was in my head.

@coggsy3036 2 жыл бұрын

Got to be honest your work is amazing mate,but spice it up 😉😀😀

@GavinClarkdiy 2 жыл бұрын

Thank you very much. I will do my best.

@user-ej6un3qu4q 2 жыл бұрын

Hello, your channel is very cool and I am a follower of it. But please activate the Arabic language for translation so that we know what you are doing. Thank you and waiting for your new feature always 📲📲📲📲📲👍⛔

@GavinClarkdiy 2 жыл бұрын

Thank you very much, I appreciate your comment. I have done the Arabic language now and I hope it works for you, can you please check that it works for you and reply back here. Thank you.

@user-ej6un3qu4q 2 жыл бұрын

Thank you very much, it was done and I am always waiting for your new special 📲

@GavinClarkdiy 2 жыл бұрын

Thank you for letting me know.