I NEVER See This! Diagnosing, Fixing And Fails! Spend The Day At The Shop With Me!

Рет қаралды 112,751

29 күн бұрын

Today we spend a day in the shop full of diagnosing and repairs. We go over.
1. How to repair a Stihl curved shaft trimmer, that the head will not turn.
2. How to repair a Husqvarna 128LD, complete fuel system repair.
3. What to look for when checking compression.
4. Why small engines are hard to diagnose sometimes.
Check out this link to find ALL the tools I use and recommend in my videos!
www.amazon.com/shop/chickanic...
If you would like to buy me a coffee or send a gift, find my Amazon Wish List HERE!
www.amazon.com/hz/wishlist/ls...
Need to repair your Husqvarna 128LD trimmer? Watch this video!
• How to fix a Husqvarna...
Buy your own Chickanic T-Shirt or Hoodie HERE!
chickanic.com/
Find some of my favorite tools in the list below!
Get a WERA tool kit like mine HERE!
amzn.to/3CEkWo5
Get your WERA 8mm nut driver HERE!
amzn.to/3I4tx4B
Find the Wiha standard nut drivers HERE!
amzn.to/3StJPLF
Find the Wiha metric nut drivers HERE!
amzn.to/42yFc7S
Find your own 2 Cycle adjusting tool kit HERE!!
amzn.to/3IMn4vB
Get a compression tester like mine HERE!
amzn.to/3KM7Ibg
Get a spark tester like mine HERE!
amzn.to/3vIHUbM
Get your own digital tachometer like mine HERE!
amzn.to/3X2emS7
Find your own digital multimeter HERE!
amzn.to/38aX2FJ
Get some 12" hemostats HERE! I LOVE THEM!!
amzn.to/3tMvlvd
Get my FAVORITE pliers HERE!
amzn.to/36P5ud3
Get an Owl Torx drill bit set HERE!
amzn.to/3urvRze
Want a Endoscope like mine? Find it HERE!
amzn.to/3Ni71Ir
Get your own X-Ray Vision TOPDON TC004 Thermal Image Camera HERE!!
amzn.to/3TjJa1o
Looking for the BEST 2 Cycle Oil? Find it here!
amzn.to/3E4kCkT
Find Ethanol Shield HERE!
amzn.to/3UAjy0P
Find some small fuel extracting pipettes HERE!
amzn.to/3wgFDav
Find a 500ml fuel extractor HERE!
amzn.to/42vuwGO
Find the Best Trimmer Gear Box Grease HERE!
amzn.to/49C5GaS
Find the Vessel Screwdriver Here!
amzn.to/3RcRQ7Q
My name is Bre. I took two years of small engine repair at the local college. When I left school, I fell into a wonderful job at a local small engine shop where I worked the counter for a couple years. In 2010 my husband and I opened up our own small engine shop in central Arkansas where I am able to work alongside my family and best friends. We saw over 2,000 pieces of small engine equipment every year, and answer 1,000's of small engine questions. We specialize in brands such as Briggs and Stratton, Kohler, Echo and Shindaiwa, but work everyday on MANY other brands like Stihl, Husqvarna, Honda, Craftsman, Remington, Red Max, Troy Bilt, Scag, Bad Boy, Hustler, World Lawn, Poulan, Mantis, Etc.. Hopefully, my experience I share, will save you Time, Money and Frustration in the future!
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting my channel so I can continue to provide you with free content each week!
Although very informative, these videos are for entertainment purposes. Please use all possible safety precautions when repairing and operating your small engine equipment.

Пікірлер: 448

@Chickanic 27 күн бұрын

Find ALL the tools I use Here! www.amazon.com/shop/chickanic?ref_=cm_sw_r_cp_ud_aipsfshop_aipsfchickanic_XN5649YKYM7ZGA335X2F_1

@wallebo 26 күн бұрын

Vessel screwdrivers are called cross point tips and not Phillips tips because they are not the same. You may, but most people don't, realize this and reach for a Phillips screwdriver when they really need a cross point screwdriver such as those manufactured by Vessel or Wera. They are slightly different standards. So, while Phillips tips are designed to cam out, Vessel and Wera tips are manufactured to a different standard (formerly known as JIS for Japanese Industrial Standard) and now known as DIN 5260 and are designed to not cam out. You may know this already, but it is a reason why the Vessel and Wera screwdrivers grip the screws so much better than a normal Phillips type screwdriver. The following brief video can explain better and certainly there are myriad other videos that also do a good job should you be interested. kzfaq.info/get/bejne/jNahiMt6v5OpeqM.html Just copy and paste. The JIS standard was abandoned in 2008 and is now called DIN 5260. I have Vessel and Wera screwdrivers and their impact bits and can tell you first hand that they make all of the difference in the world. Loving each video more and more.

@ChiefsFan62 25 күн бұрын

Love how the chickens were a little hesitant to come out until they heard their mama's voice, then it was everybody out! 🥰

@DHGo-ex7ns 27 күн бұрын

I love the high tech chicken door. Very Cute! I really like the fact that you're showing what it takes to actually repair a lawn product. Most people don't appreciate the time, labor, replacements parts it takes to repair a product. In addition, your long time experience explaining the problems will explain to customers what you're charging what you do and you're not ripping them off and please explaining to customers that you have a business and not a charity. Worth every dime just for your experience.

@robertkosovich1232 25 күн бұрын

Thank You! Retired electronics serviceman drinking my coffee, watching and learning from you! Love the videos, troubleshooting procedures. Real life answers! I'm hooked! LOL thanks again!!

@tomfarley3924 27 күн бұрын

Thanks, Bre. I've been working to help cleanup tornado damage here in NW Arkansas the last three days and your tips and tricks are invaluable. Might have gotten a few more viewers for you in the process. Have a wonderful day.

@davec3689 27 күн бұрын

Bre - Please heed my advise, hit your sparkplug wrench (and other tools) with a plastic mallet and not your hand. Your hands will thank you in retirement. Thanks for your great content.

@patriciamaines-riggs1982 22 күн бұрын

I agree with you brother. Each finger is going after both wrist went first. 😢😂 love the joints when you’re younger.

@gregtracy9007 10 күн бұрын

I smack everything age 63 all body joints need impact to stay healthy. I really rack my back at work went home ran a 4 miler felt fine after. I notice people that consume sugar and never drink water have more pain problems.

@kbjerke 27 күн бұрын

Finally my "fix" from Chickanic!! Thanks, Bre!! ❤❤

@gregorygagnon4641 23 күн бұрын

Watched this episode for the first time and learned a lot. I'll be back for sure.

@drfalcon4102 27 күн бұрын

Years ago (1983) I was working in a small welding/ small engine repair shop in Wisconsin, the Husqvana Rep came by one day anyway, we were seeing tons of those Chainsaws eating up pistons,, He told us to run them as rich as possable,, customers didnt care for it but, they lasted longer, seems the Chrome was Very thin and needed as much lube as they could get

@thm3525 24 күн бұрын

Each episode I learn something new. I enjoy watching. Thanks

@dfields9511 27 күн бұрын

12:43 nice garage door for the chickens

@donaldjones3580 27 күн бұрын

My neighbor asked me to look at his Stihl 026 chainsaw, I'm a retired helicopter mechanic, two-cycle small engines are another world. After looking at KZfaq videos I went over and got it, checking out a bit before I brought it home and noticed the choke lever was not acting like the videos showed. What I found, the kill switch spring instead of riding on front side of the red shaft it was laying on top, so in full choke the ignition was grounded, also the ear on the red shaft that the throttle moves was broken off. Waiting for a new choke/ignition switch shaft, the spring I got back in place and re-bent correctly. Watching your videos I had so many things that could be wrong in my head. It would start with great difficulty but run badly.

@davidbiggs2952 27 күн бұрын

Another great video Bre. Do one thing, get some safety shoes. As a safety officer for a fire department, I can tell you shoes are cheaper than a trip to the ER. Stay safe and keep the videos coming.

@EdWeibe 27 күн бұрын

Never say never Chica.Good find on that oil flinger.

@annettaaltensey2477 26 күн бұрын

Hi Bre, that Vessel screw driver is Japanese and is a specialty phillips. They are sized close to American Phillips screw drivers but also have a shorter point or no point. I bought special size to do a break job on my Honda CR-V. F.Y.I.😊

@patriciamaines-riggs1982 22 күн бұрын

Thanks for informing me about 2 stroke engines. Always learn something new when I watch. Your personality makes you a great teacher. Your chickens aren’t babies anymore. Haha

@general5104 27 күн бұрын

Thanks Bree. I appreciate all you do and all you teach us, and the CARE you send. Quality, at its best!

@Halengar 27 күн бұрын

New chickanic going to be a good day!!!

@morgansmith2087 27 күн бұрын

I've owned a Stihl FS45 for about fifteen years and it has never missed a beat. I've only replaced the plug and the air filter for the first time about three months ago; absolutely the best trimmers ever made👍

@glenbreaks5448 27 күн бұрын

As a customer, I like your way of diagnosing problems, not the " Just throw a governor on there no matter what" way. Years ago I had some electrical problems with my 5 year old F350. Wacky things were happening, no crankover, then turn key again and easy crank over, wipers come on when switched off and so on. The shop mechanic told me over the phone that it would be the alternator, before he had even looked at the truck. I questioned that, which he didn't like at all!. He phoned a couple of hours after getting the truck to say, " Yes its fixed, it was the alternator just like I said. I just need to road test it and then you can pick it up" About twenty minutes later he phoned back to say " Uh we have to hang onto your truck, there is something else going on with it" They did find the problem. A mouse or mice had gotten into the steering column and chewed several wires so that various bare wires were making contact as the truck bumped along. They fixed that but insisted that the Alternator had also needed replacement. Yeah right! The removed my perfectly good Autolite factory alternator and replaced it with a Chinese knock off for $700! It barely lasted 2 years. I figure someone somewhere is probably still using my Autolite. The original factory stuff tends to last and last. So I really appreciate your " test don't guess" approach

@jlexjmjmjm655 27 күн бұрын

Is that a VW Beetle under cover? Nice. Your air-cooled experience should come in handy working on it. I have a '70 beetle... original engine, carburetor, transaxle etc. Had to drop the engine twice to work on it. (Oil cooler seal repair & replace heads due to valve guide wear). Great to see a good looking lady working on an engine rather than a greasy old guy. Keep up the good work!

@frankstavalo5788 25 күн бұрын

Thanks, Bre always learning something from you. Keep up the great work.

@fordmud 27 күн бұрын

That vessel screwdriver is a JIS screwdriver, has so much better grip even with philips screws, and enough grip with JIS screws to actually break the screw before it strips out. JIS (Japanese industrial standard) screws are pretty common on a lot of small engine carbs.

@jerryfritz1338 27 күн бұрын

You make it look so easy! That is a symptom of skill and experience. So interesting to watch!

@josephdesmet8245 26 күн бұрын

The job I had before I retired I had a pair of the Vessel screwdrivers in my tool bag and yes they are great screwdrivers. The heads are JIS (Japanese Industrial Standard) phillips head design. The difference is the flutes have a slightly different angle than a standard phillips head. The head grips phillips screws much better than a standard phillips head srewdriver.

@da8149 27 күн бұрын

Love your channel, been a fan for some time now. Love watching re-runs. Don't you leave town now !!

@charleseddy9903 27 күн бұрын

You are AMAZING, what a woman and mechanic. God Bless.

@MickNewman-kz7fe 15 күн бұрын

Just found your site and have to say it's great. Learned so much watching your videos. Totally looking my equipment over and performing well deserved maintenance. Oh, buy the way, love your Corvette.

@johnme7049 27 күн бұрын

You're the BEST! God Bless you Bre. Give our best to the family.

@ElizabethFranquiEsq 27 күн бұрын

Hope you do feel like your audience is right there with you as you film these.

@jimandnena4 27 күн бұрын

SO GLAD to see you back, Miss Bre! We were watching the storms from Texas as they headed your way and we were praying they missed you and homestead (and the chickens!). Great video, thank you.

@davidgagnon2849 26 күн бұрын

Bree, I've never see you use one, so I'd like to suggest it. Buy yourself a bicycle stand, either a portable, mobile one that you can leave set up in the shop, or get one that you can mount to your bench or into the floor. They are such a help as you can clamp a string trimmer shaft in the grip and have both hands free to work on the machine. We did this 40+ years ago in the shop I worked in and now I've got one in my home shop. Once you use it, you'll see what I mean!

@pilotalan 27 күн бұрын

Love your channel! I have replaced ALL my Philips screwdrivers and bits with Vessel JIS screwdrivers. As you have probably found, JIS crossheads don't cam out and strip the way Philips do. They've made my life so much easier. Thanks for all you do, and have a wonderful week!

@phyllismulkey3778 24 күн бұрын

great job .i fixed my homelite weed eater just by watching your videos. ty

@stevenwaller192 26 күн бұрын

Had an incident with an old lawnboy two stroke. Couldn’t get it to start in the spring after it ran great the fall before. Was taking it to the local shop anyway to fix self propelled mech. Shop told me no compression. I took it home and tried boat fogging oil to free carbon and loosen rings. Mower started. Returned to same shop. Owner was amazed claiming it runs like new. And then fixed the self propelled mech

@tonylowell8422 27 күн бұрын

Watching the chicks coming out was awesome

@BleuCollarFndryMTL 27 күн бұрын

Some people are easily entertained.

@tonylowell8422 26 күн бұрын

Yes we are sir @@@@

@stevehennessy3588 26 күн бұрын

Just used my Husqvarna trimmer and it's running great, but I will check the fuel lines before I use it again. Thanks for the "heads up"' on that issue.

@SpruceGoose-qx8zj 27 күн бұрын

I love how you say Hooskvarna♥♥♥☺☺☺

@johnduffy6546 26 күн бұрын

You never cease to amaze me. Thank you for your work ethic. You are an inspiration!

@jerrywhitlock4028 27 күн бұрын

You really know you business girl Nice watching you working

@scubatraveler100 26 күн бұрын

Thank you for putting out excellent educational videos. You're the BEST!!

@jeaubeau 23 күн бұрын

Sitting here sipping coffee and enjoying your video I'm thinking... I need to get my butt outside and do some work myself thanks for the inspiration..👍🏻 Well done chick! 🐣

@skypilot7103 27 күн бұрын

You’re the best thank you for sharing your knowledge with us all!

@clivecarrington8814 26 күн бұрын

Thank you for taking us along with your work. It's a wealth of experience and knowledge that I and many others appreciate. Have a great day

@davidhuffine5084 26 күн бұрын

Love watching you fix stuff . I learn so much . Thank you .

@ericjones6330 21 күн бұрын

You make GREAT videos. I always look at you channel to see if it's possible I can fix something. Usually that answer is no, so I take it to professional. I know I don't have the patience you do to track down a problem.

@dansalinas2322 27 күн бұрын

Bre, super job! Got to hand it to ya, "you make things run better than new!"

@gregfisher216 27 күн бұрын

Pool is looking good !!😊

@T.W.goodguy 26 күн бұрын

Great work and information.have a great weekend.✔️✅✔️😎☮️✌️

@aintworking1 27 күн бұрын

Great video. Thanks for sharing your knowledge and experience.

@alanmccalla6737 27 күн бұрын

Always a wealth of knowledge, experience and tips. Thanks Bree.

@cycleguy666 27 күн бұрын

Thanks for your speedy video tune too....and the exit tune too...... I think of it as Chickanics tune or Bre's song!! Local musicians or you and Ron colaborating?? Very catchy!! Hahaha 😆 👍

@lonhoschar1943 27 күн бұрын

Great video!! As always, a lot of good information. Thanks Bre, for sharing with us and showing us the "how to" on those machines.

@tedstankunas7142 26 күн бұрын

Hi, I work in a small engine repair shop.. when I do an annual service on a curved shaft Stihl trimmer, I remove the screw holding the bearing in place and lube the bearing with a chainsaw bar grease gun that has the pointy tip. That works great.

@robinsnyder8877 27 күн бұрын

Vessel cross point screw drivers are made for JIS screws. Example if you ever look at a screw on a Honda motorcycle look for a small dot on the screw head beside the screw driver slot. The dot means it's a JIS screw. These drivers are made a little different than a regular philipps screw driver and are less likely to strip the screw slot out. On the other hand most screws on your Honda are stripped out from using a regular phillips screw driver.

@rodneymiddleton9624 26 күн бұрын

I always replace both the governor and the camshaft at the same time. That's an odd issue for sure. Thanks!

@dave-uf8ir 27 күн бұрын

Excellent baby's lookin great cheers 🥂 😊

@leosiwicki2013 25 күн бұрын

I am amazed at her knowledge. If it were me I would never know how to put it back together 😅

@MartyMcElwee-fc2yi 25 күн бұрын

I just recently found your channel, I am trying to watch some of your old videos, and I really enjoy how you present your work. You have already saved me money on my Husqvarna BT145 Blower. Do you ever have videos on Honda products, I haven't found any of those yet. I have a Honda string trimmer and several engines on lawnmowers.

@user-tj9kt5cs6d 27 күн бұрын

Chickens have an automatic garage door opener do they have TV too? Great episode who would have guessed governor broken in such a way.

@Heartag0ld 27 күн бұрын

Plenty of good comments below regarding Vessel JIS point screwdrivers. So I will only add that Vessel also makes them with built-in Impact Drivers. They are a truly great tool. As a mechanic with more that 50 years experience, I've been using them exclusively on anything with a JIS head for decades. Great channel. Thanks!

@costasmandylor7252 27 күн бұрын

Solid pointers on the fuel lines for the trimmer. I'll check that tonight!

@billlaporte8255 26 күн бұрын

I love all your vids Bree... great job on another one!

@swayme67 27 күн бұрын

You are simply awesome, thank you for these videos!

@williamwinsor7376 27 күн бұрын

I had an airless with a cracked cylinder and the paint inside it was the perfect gray same as the cylinder so the crack kept getting filled with matching paint as it tried to run under the lower ball cage. It was a real puzzler. I found it by filling it with compressed air and then it could be spotted.

@daveallen924 25 күн бұрын

Good video, as always. Thank you!

@jamessmith7691 27 күн бұрын

Your video's are most helpful. I was on the verge of scrapping a Kohler, old stx 38JD as it would run away but not all the time. My mechanic friend said look at the throttle shaft in the carb. You snapped at a slight angle. Good video, keepem coming.

@GNX157 25 күн бұрын

On the riding mower, an option could be to go in thru the oil fill or dipstick hole with an articulating borescope (which I know you have), and see what you can see.

@Midwest-small-engine 27 күн бұрын

Glad I got to watch this today I struggled with replacing the lines on a 128cd Husqvarna I picked up free once cleaning the rust from the carb and dialing it in runs like a champ found it odd why people remove the air filter and the cover an just run trimmers without the cover and filter as always enjoy the weekly videos have a great week!!

@Aussiekym 16 күн бұрын

Your pool area looks great.

@timkopp2204 25 күн бұрын

Great info! Thanks for posting!

@markf8256 27 күн бұрын

Bre, thanks for the continuing education. The odd stuff is always worth a watch. Be safe. This tornado season looks like it’s going to be extended thanks to the building El Niño.

@pyrog.c.c89 27 күн бұрын

Super genius, another job well done.Gary.

@davidgray4599 23 күн бұрын

Thank you. As always another great video.

@oldbonesbushcraftrodjackso474 27 күн бұрын

Hello Bree awesome diagnosing . Thanks for sharing .

@victorpayne6586 27 күн бұрын

Always good stuff. Thanks.

@georgelennon3618 26 күн бұрын

You are not only a master mechanic, you’re the Queen of Double Entendres! 😂😂

@cncbuss1 27 күн бұрын

Now I know how to change the bearing on my FS38 weedeater when it sees up on me. Thank you ma’am. Cheers from Montreal, Canada!

@mortneff4674 27 күн бұрын

Your loft looks cool!

@Chickanic 27 күн бұрын

Thanks! It's a work in progress.

@keithscritchfield2913 27 күн бұрын

Your shop looks exactly like my brothers shop in Colorado. He even has a 1979 Corvette up on jacks.

@butchwallace7710 27 күн бұрын

I enjoy watching your videos

@telecomsuk 26 күн бұрын

Great video as usual . Frustration for me is Ryobi fuel line, everybody says theirs is correct but it’s either to loose on the carb pipes or to loose in the tanks hole and some so called fuel pipe has gone discoloured and hard in weeks.

@geoffklein1434 27 күн бұрын

Using your videos I tried to diagnose my Lawnboy, electric start, self propelled lawn mower but couldn’t find the issue. It just quit running in the middle of mowing. Finally gave up and called in a repairman. He was flabbergasted as well and called someone else. Turned out to be the engine stop cable had stretched and wasn’t able to keep tension on the stop lever. I pulled the slack out of the cable and put a split shot on the cable to keep it tight.

@hthomure68 27 күн бұрын

I have that exact same DeWalt air compressor that I saw at the beginning of the video.

@ChevyJay283 27 күн бұрын

We have a set of those Vessel Phillips that are made with a Japanese Industrial Standard tip. It seems to work better than the domestic screwdrivers. 100% agree with you!

@Vibe77Guy 27 күн бұрын

That instance, it was probably the camshaft failure that gimped up the governor. So you were going into the case anyway.

@robertbland7661 25 күн бұрын

Those screwdrivers are awesome!

@kencurtis228 27 күн бұрын

TY for Sharing

@BearE9090 26 күн бұрын

Great video. Thanks for the tip getting the cable lined up on a curved shaft. Chickens have grown a lot and have a nice auto door.

@STRunnerNC 27 күн бұрын

Great video! Thanks!

@randi740 25 күн бұрын

Great work!

@rubendfernandez4747 27 күн бұрын

very good information in each video im learn that is very good thank you

@OldBenOne 27 күн бұрын

@ 4:15 Every time you strike the plug wrench in that manner, you are compressing the fatty layer that protects the nerves in your hand. In a few years, every time you turn your steering wheel, swing a hammer or shake hands you will be wincing in pain.Any one who finds themselves whacking tools with their hands should make a block of wood or rubber for this action a part of their tool kit.