I Paid $99 for a BROKEN Xbox Elite 2 - This One Was A Tricky Fix

Рет қаралды 833,302

3 жыл бұрын

Video Sponsored by Ridge Wallet:
www.ridge.com/TRONICSFIX
Use Code "TRONICSFIX" for 10% off your order
I Paid $99 for a BROKEN Xbox Elite 2 - This One Was A Tricky Fix. The controller was in pretty good condition except for the strong smoke smell. However, after testing I found several of the buttons didn't work. Once I got the controller opened up I found the controller had liquid damage. Cleaned everything up and tested it again...but the buttons still didn't work. Reflowed a BGA chip on one of the motherboards...but that also didn't get the buttons working. Then I noticed more liquid damage on another one of the chips. Cleaned that up and resoldered the joints and then tested the buttons again and...they worked! A bit of a tricky fix but good to finally get everything working.
►Tools & Parts I Use (paid link): www.amazon.com/shop/tronicsfix
►TronicsFix Game Console Repair Forum: www.tronicsfixforum.com/
🎵 Like the Music? I use Epidemic Sound (paid link): share.epidemicsound.com/tronic...
SUBSCRIBE: / @tronicsfix
-----------------------------------------------------------------------------------------------------------
Instagram / tronicsfix
Facebook / tronicsfix
Twitter / tronicsfix
Website www.tronicsfix.com/
-----------------------------------------------------------------------------------------------------------
Tools I Use:
-Protech Toolkit: Amazon (paid link) geni.us/90il5y
-Torx Security T8: Amazon (paid link) geni.us/AEcBvZL
-PH00 Phillips: Amazon (paid link) geni.us/YGVSSv
-Tweezer Set: Amazon (paid link) geni.us/t0VrlcX
-Electric Screwdriver: Amazon (paid link) geni.us/2wbHzJ
-Thermal Paste: Amazon (paid link) geni.us/q2Prd
-Canned Air: Amazon (paid link) geni.us/CPYy
Equipment Used:
-Hakko Hot Air Station: Amazon (paid link) geni.us/y2JDR
-Nozzle for hot air station: Amazon (paid link) geni.us/zpEWlT
-Hakko Soldering Station: Amazon (paid link) geni.us/MTL0qb
-Hakko Air Filter: Amazon (paid link) geni.us/Gqznh
-Microscope: Amazon (paid link) geni.us/WBO3b
-Kester Solder: Amazon (paid link) geni.us/ETXUh
→Business Inquiries Email: steve@tronicsfix.com
TronicsFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. All material provided within this KZfaq channel is for informational, educational, & entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. No information contained in this video shall create any express or implied warranty or guarantee of any particular result.
TronicsFix does not make any claims of the safety of the projects, techniques, or resources listed on this channel and will not take responsibility of what you do with the information provided by this channel. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not TronicsFix. Please do not attempt anything contained in this video unless you accept personal responsibility for the results, whether they are good or bad.
(*We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.)
Disclosure of Material Connection: Some of the links in the post above are “affiliate links.” This means if you click on the link and purchase the item, I will receive an affiliate commission. Regardless, I only recommend products or services I use personally and believe will add value to my readers. I am disclosing this in accordance with the Federal Trade Commission’s 16 CFR, Part 255: “Guides Concerning the Use of Endorsements and Testimonials in Advertising.”
The music used in this video does not require attribution.
About This Video: The controller was in pretty good condition other than the strong smoke smell. However, when I tested the controller a bunch of the buttons didn't work including the shoulder and ABXY buttons. Once I got the controller opened up I found liquid damage on one of the motherboards. Cleaned everything up and tested it again...but the buttons still didn't work. Next I tried reflowing a BGA chip on one of the motherboards...but that also didn't get the buttons working. Then I noticed one of the chips on the other motherboard had some liquid damage. Once that was cleaned up and the joints resoldered I tested the buttons again and...they worked! A bit of a tricky fix but good to finally get everything working.

Пікірлер: 1 200

@Tronicsfix 3 жыл бұрын

Thank you to the Ridge Wallet for sponsoring this video! www.ridge.com/TRONICSFIX Use Code "TRONICSFIX" for 10% off your order

@michellefernandez3155 3 жыл бұрын

This was such a good video. But i do miss the part where you put everything back together and address the smoke odor and how to remove it.

@MikeGervasi 3 жыл бұрын

Been meaning to get one so I ordered. Thanks !

@Tronicsfix 3 жыл бұрын

@@MikeGervasi Thank you for supporting my sponsor!

@awhvex7188 3 жыл бұрын

Am i the only one that thinks broken controllers cost too much for a BROKEN CONTROLLER THAT YOU GOTTA MESS WITH AND FIX? BUYING COMPONENTS ASWELL? Like jeez.

@GOATGamerProSticks 3 жыл бұрын

Those trigger motors may have been the smoke point looks like someone dropped a drink on the pad or dropped it in the sink (salavating gamers) lol, dose it still rumble at the triggers? GT85 spray might make it smell nice?

@trentonmoonias239 3 жыл бұрын

"We don't need the warranty, I am the warranty" -Steve, Tronics Fix New shirt idea

@Cabeza492 3 жыл бұрын

Just like Davy Jones.

@kc4415 3 жыл бұрын

I'm a fan of repairing things but when something has warranty still active, I'm always gonna get it replaced/repaired under warranty. Bought a HP x360 elitebook with a bad keyboard that has warranty, saved a few hundred £££ from the going used price.

@kruleworld 3 жыл бұрын

Hey, that's Tavarish's line, and he already has shirts.

@RPGillespie 3 жыл бұрын

Walter White, as an electronics repair guy: "I *am* the warranty"

@trentonmoonias239 3 жыл бұрын

@@RPGillespie I am the one who repairs

@UchihaSatzuki 3 жыл бұрын

"I am here, because you broke something" Weellll, nope. I am just here for entertainment 😊

@Tronicsfix 3 жыл бұрын

Either way, thanks for stopping by!

@am_dragon5713 3 жыл бұрын

Same

@prxcense5082 3 жыл бұрын

I'm here coz this is in my recommendation

@gibby4819 3 жыл бұрын

What got me dying was that every time he came back and said “it’s put back together enough to test it” it was always less put together than the time before 😂

@jacobmcmanus6242 3 жыл бұрын

😭😭😭🤣😅🤣😂🤗😂🤣😂😂😂😂😂🤣

@vestorflipsters6491 3 жыл бұрын

When Steve said, "We fixed it!" I was like, "We did it Steve!". That's a good feeling. :D

@Cabeza492 3 жыл бұрын

I loved that part too dude! I have been learning a lot from this guy since I start watching his vids!

@kelonbuncher6065 3 жыл бұрын

Lol I thought the same thing. I was thinking I just watched the video and through our team work, we did it!!!

@smithsta24 3 жыл бұрын

Spoiler alert jeeeeez

@bobbyseals007 3 жыл бұрын

Happy Tears

@vkx9717 3 жыл бұрын

this is so wholesome :)

@dc7783 3 жыл бұрын

Steve: “When in doubt, take more screws out!”

@Tronicsfix 3 жыл бұрын

Exactly!

@raddaks2039 3 жыл бұрын

it's actually super cool to see you working on something you haven't worked on before. Gives a lot more insight into the problem-solving method! Thanks for the video!

@Tronicsfix 3 жыл бұрын

Glad you enjoyed! I've got another great video coming up where I fix 25 of the Elite 1 controllers that has a number of things I've never fixed before.

@DJoeyJordi5on 3 жыл бұрын

@@Tronicsfix can't wait for that video!

@nathan_nothing 3 жыл бұрын

@@Tronicsfix That is how you learn how to fix them though! Trial by fire! :)

@slimjimmy8518 3 жыл бұрын

“Tricky fix” don’t be so modest, we know it was easy for you.

@Tronicsfix 3 жыл бұрын

It wasn't the most difficult fix but it also wasn't that easy.

@diareegorgelaar 3 жыл бұрын

@@Tronicsfix Haha still humble. You're a cool dude.

@DoggiesGaming18 3 жыл бұрын

Hey what is the hardest fix you have? Please share link (I find your videos satisfying 😂)

@Cabeza492 3 жыл бұрын

I love that at the end he says "WE fix it!" as if those of us who were watching the video had helped him to do it. This man is not just an electronics technician, he is also an artist!

@RiderLeangle2 3 жыл бұрын

As someone who does repairs I just always assume there's a lot of things cut from these videos, mainly a lot of frustration and putting it down and moving on to other things for the day before having an aha moment of more stuff to check before finally ending up on something else to try.

@nathanlopez5610 3 жыл бұрын

Wait, that was 20 minutes? That was fast.

@Tronicsfix 3 жыл бұрын

Ha, ha...glad it went by fast. It's always hard to know how long to make these videos.

@MartinDerTolle 3 жыл бұрын

Whoa didn't notice the length until now, felt more like 10 minutes

@CarKrueLp 3 жыл бұрын

@@Tronicsfix length is perfect!

@Gassit 3 жыл бұрын

@@CarKrueLp That's what she said

@cheke_hs 3 жыл бұрын

*_Stop right there, McFly!!!_*

@TheNeoMassacre 3 жыл бұрын

When Steve has a Device on the Table... Warranty has left the Building....

@Tronicsfix 3 жыл бұрын

Ha, ha...for sure!

@gordonscott3189 2 жыл бұрын

Nice pfp

@shred2097 3 жыл бұрын

I appreciate how nervous you sounded at the beginning, I love taking stuff apart and actually welcome that feeling. That’s how confidence is built over time.

@christianvisser2369 3 жыл бұрын

Smoke smell? Water damage? I bet that dude spilled bong water on that thing 😂

@cck6740 3 жыл бұрын

I love how thorough you are. You clean everything..a true commitment to quality work.

@Tronicsfix 3 жыл бұрын

Thank you!

@rezonite 3 жыл бұрын

This is why I come to watch his videos, to watch him q-tip every nook & cranny.

@OfficialiGamer 3 жыл бұрын

"I'm here, because you broke something" LOL best intro ever.

@mgordonsmith 2 жыл бұрын

Just came across your videos, and I really love how dedicated you are to finding a fix before ordering new parts! I've been tinkering with hardware ever since high school, and I definitely would have stopped and just replaced a part at a lot of the points you came across in this video. Definitely inspired to look a little closer next time to see what I can find.

@devoid3227 3 жыл бұрын

Started fixing up controllers myself and your videos have helped tremendously. Keep up the great work!

@mufasaiam7794 3 жыл бұрын

The more complicated the fix, the more fun it is to watch! Good job TronicsFix!

@Tronicsfix 3 жыл бұрын

Thanks! Glad you're enjoying these.

@TripleeVFX 3 жыл бұрын

10:21 I found a solution to drifting analog sticks. All you need to do is pry open those 2 green containers on the module. There should be a small disc in there. You just have to clean that entire container and the disk with isopropyl alcohol and place the disk in perfectly. Your problem should be solved instantly. Works for me every time, however it’s a temporary solution lasting for about 6 months or as long as a normal analog stick.

@TripleeVFX 3 жыл бұрын

@cpt ghost he actually made a video on this just look up his 3 ways to fix controller drift video.

@furtalance_x 5 ай бұрын

That was awesome Steve. Im about to attempt fixing one of these soon too so just needed to see the setup.

@atsine1072 3 жыл бұрын

Hey I love your channel. Always nice to know these things for when my stuff goes sideways. I also love you occasionally going off track to cover something else helpful. I really appreciate it😊

@vegaomega6072 3 жыл бұрын

that controller is an honest work of art. glad you could get it working properly again.

@Tronicsfix 3 жыл бұрын

Thanks!

@miguela7819 2 жыл бұрын

even though I'm not a consistent viewer of his videos I'm glad he made this one, it literally just saved me from tossing out or setting aside my only veeery expensive controller, keep up the great work

@Tronicsfix 2 жыл бұрын

Glad to hear it!

@loadingpleasewait2225 3 жыл бұрын

Idk what it is, but I've been binge watching your videos.. I used to repair older iphones > 4-7 then stopped. Watching your videos makes me want to start repairing electronics again! Keep up the awesome vids and the great work

@abdullahalnaimy9675 3 жыл бұрын

Lowkey steve’s videos helped me, especially for ps4 controllers because i change their shells a lot and steve had the best explanation of how to do it

@marcel_kleist 3 жыл бұрын

Steve is the repair genie, that appear every time we break something. So good to have him!

@Tronicsfix 3 жыл бұрын

Ha, ha!

@danielbrown505 3 жыл бұрын

Just as a helping hand, in the case where there are 2 holes there should be two more analogue sticks as they ship 6 all together, 3 different sizes

@CoolDudeAwsome987 2 жыл бұрын

I always watch these videos to see how fixable something is before buying. I just bought a ‘lightly used’ elite series 2 controller on eBay and this video gives me the confidence to repair if and when the time comes.

@sika9577 3 жыл бұрын

I would never do any type of work that you do but it's so entertaining to watch you troubleshoot these things

@irvgotti452 3 жыл бұрын

In my experience fixing Xbox one controllers I say "It's fixed....for now..." lol

@Tronicsfix 3 жыл бұрын

Lol!

@odd6969 2 жыл бұрын

Can u upload more pls

@Kazuto_Wildcat 3 жыл бұрын

21:27 The moment when you are so happy that you fixed it because it wasnt a waste and he didnt give up ^^

@Egon1982 3 жыл бұрын

Superb video as usual :) 3:37 interesting adverts youve got there ;)

@RepairResell 3 жыл бұрын

PS4 and Xbox One controllers are the first devices I started fixing on my channel. It's nice to see that an expert like you still make similar mistake as me when you repair these. It's also nice to see the difference between a novice like me and an expert. :)

@diegosolorio1318 3 жыл бұрын

i love that intro xD "I'm here because you broke something"

@ceejayszee 3 жыл бұрын

Alright Steve, I'll be looking forward for your analysis of the internal hardware of the next Xbox SX and PS5, and their "repairability" when they come out! Anyway, thanks for the good video, as always!!!

@Tronicsfix 3 жыл бұрын

Can't wait!

@joeyhenry7312 3 жыл бұрын

Awesome! I want to learn how to diagnose on that level. Still green but I'm learning all the time. A lot of insight as well as just plain entertainment from your videos!

@virgildeklerk 3 жыл бұрын

Wow nice video again Steve! Really nice to see how you fix those liquid damage problems which i think are very common now days because many people spill drinks over their consoles,controllers. Also thx for telling the viewers about the drifting analoge stick repair trick and yes replacing is better fix but for the people who can't or won't solder i helps ;). Thx for the great video and i'm looking forward to the next one with the Xbox one controllers.

@HumanDelta38 3 жыл бұрын

I had actually fixed one of those a week ago. Drift issue. Fixed it up. There is a website I use to test every controller I work on, which happens to be the site you used. Funny how its registered as a 360 controller.

@Tronicsfix 3 жыл бұрын

That was strange but still worked fine. I'm not that familiar with that site so I wasn't sure if that was normal or not.

@HumanDelta38 3 жыл бұрын

@@Tronicsfix I will say the gamepad tester app has given me bad readings before. I replaced the sticks on one, tested it with the app, and everything looked fine. The customer brought it back with the same issue. So I used that site and sure enough the drift was still there. So it's good to have a backup just in case.

@virgildeklerk 3 жыл бұрын

@@HumanDelta38 yes true also windows 10 has a buildin controller test which also works very good on finding drifting.

@g.b421 3 жыл бұрын

Bro your amazing I love to see you repairing game console

@Tronicsfix 3 жыл бұрын

Thanks!

@claywhitney2949 3 жыл бұрын

I love the shirt! I have watched your videos many times before i broke my MacBook but your videos gave me the confidence to fix it. Spilled a beer in it and it wouldnt turn on. Ripped it apart cleaned everything and it works perfect!

@mathewpeters1658 3 жыл бұрын

You have me a few ideas on how to fix my series 2. Thanks. Subbed.

@dexterwong2277 3 жыл бұрын

I'm so jealous of your know-how in fixing and repairing broken electronic devices. Great video!

@Tronicsfix 3 жыл бұрын

Thanks!

@undeadburg4803 3 жыл бұрын

I watched a solid 4 minutes before realizing a broken/parts controller costs $100.

@CallumSk8er 3 жыл бұрын

Man its not much more to buy a working one lol

@ajfergy5569 3 жыл бұрын

@@CallumSk8er from what I saw the series 2 is around $170 so it’s near double the price..

@firecat2465 3 жыл бұрын

@@ajfergy5569 parts man parts.

@lordvader5058 3 жыл бұрын

If it's a broken controller he should be charging no more than $40 for it I mean geez

@sethcravens7679 3 жыл бұрын

I just bought a basically brand new one for $100

@oldskool7706 3 жыл бұрын

Awesome vid. Might even dig out my old Xbox one controller that went haywire years ago, for a good clean up

@hudster80 3 жыл бұрын

Very impressive! Great diagnosing the issue!!!

@Icexeroify 3 жыл бұрын

The Mighty Steve is at it Again. Rocking Solid Dude! Steve 2020

@Tronicsfix 3 жыл бұрын

Thanks!

@hadesmcc 3 жыл бұрын

Funny you would make a video on this controller, I recently purchased a faulty Xbox One Elite Series 2 controller myself for €79. Upon opening it up, I was kind of shocked at the state of it, I have a hard time understanding what happened to it but I got it to work in the end. It was missing the magnet for the hall effect sensor on the left trigger (I could only find one from an elite series 1 on ebay, figured it would do). The support bracket for the magnet was broken and the broken half was missing as well (I could only find these brackets for either the regular controllers, ended up ordering one for an S controller). The left shoulder button didn't work, didn't even click in (turns out the metal plate it fits onto had been bent a lot, had to realign it). The right trigger rattled when vibrating (had to tighten it down). In the process of opening the previous owner broken one of the little pillar that holds the left bumper in, no biggie, it works fine without that. They also broke one of the structures that holds thee controller fascia into place and they broke one of the structures that holds the silver plastic on the top of the controller into place so it looks slightly misaligned. Anyway, I got it to work fine and I'm happy with that.

@Tronicsfix 3 жыл бұрын

Nice work! Controllers can be challenging to repair because of how badly they're treated sometimes.

@hadesmcc 3 жыл бұрын

@@Tronicsfix yeah, I've been struggling with some ps4 controllers. One of them still has drift even after replacing the offending analog stick twice, with a new one.

@Tronicsfix 3 жыл бұрын

@@hadesmcc That's a tough one. I haven't done enough of them to give you any ideas.

@hadesmcc 3 жыл бұрын

@@Tronicsfix I'll have to keep at it. I had a similar issue with an Xbox One Elite Series 1 controller but that had been my mistake, I had moved one SMC with the hot air inadvertently. Fixing that fixed the issue but that is not the case with this rogue DS4 controller. :)

@devoid3227 3 жыл бұрын

André Coelho I bought a DualShock 4 off eBay which had a broken analog stick/drift issue. I replaced the joystick module and still had the stick drift. There’s two resistors and depending on which way the game character moves with the stick drift, one or both will have to be replaced. The character moves back on its own and won’t move forward so that tells me the resistor on the left has to be changed. You’ll have to keep changing the resistor until you find the right one and luckily I only have had to change it once or twice.

@bear1245 3 жыл бұрын

Love the super close ups on the board damage 👍🏻

@bdiddy1138 3 жыл бұрын

I enjoy most of your content, but I REALLY like watching you figure something out like this 👍 thanks for the great vid as always ✌️

@Tronicsfix 3 жыл бұрын

I keep seeing comments asking for longer vids so this is for you!

@benjaminschneider 3 жыл бұрын

0:10 I’m only here because I’m a subscriber and I like your videos. I’m not a gamer what so ever and I don’t want to fix anything.

@andrewgwilliam4831 3 жыл бұрын

Me too!

@jsora03 3 жыл бұрын

Is the shirt going to be on the merch shop? That is the perfect thing to wear to work.

@Tronicsfix 3 жыл бұрын

It's already there! It's on the merch shelf below the vid.

@immersivegamer7640 3 жыл бұрын

Hey Mate - another grest video, thank you! Fascinating stuff watching you disassemble electronics and fixing and cleaning them. My only gripe is that you make everything soo easy 😉 I may have been able to disassemble it but putting it back together... thats another story. Back in the day I was fixing a PS3 controller and it was a wild ride 😉 This thing looks muuuch more complex.

@Realmjumper4099 3 жыл бұрын

Hey I just want to say thank you for being you and doing the videos. You helped me open my PS 4 Slim and make sure it didn't have dust. Also I am a computer technician on the side from my main job and now I can work on my PS4 Slim thanks to you.

@ruax6993 3 жыл бұрын

love these videos

@Tronicsfix 3 жыл бұрын

Thank you for watching!

@paulorossicroce 3 жыл бұрын

I would give up in the second attempt, congratulations !

@Tronicsfix 3 жыл бұрын

Sometimes you just gotta keep trying!

@liljjstudios 3 жыл бұрын

I was having this exact issue on a regular Xbox One controller after I replaced the sticks, so this video is actually extremely helpful to me.

@elipsorange 3 жыл бұрын

Dang, love the content dude. Would love to see more PS4 and Xb1 fixes again, those were very entertaining. Appreciate the hard work dude.

@Tronicsfix 3 жыл бұрын

Thanks for the feedback!

@TheZombieKillsss 3 жыл бұрын

Yeah i wanna see more console repairs to ive rewatched the old ones at least 6 times

@zUltraXO 3 жыл бұрын

I love how you just try your luck on these items you've never opened before instead of following tutorials.

@Tronicsfix 3 жыл бұрын

I do follow tutorials if it's something I just have no clue how to fix.

@mondherbouazizi4433 3 жыл бұрын

He doesn't follow tutorials because he makes ones :

@samsonson528 3 жыл бұрын

i love his face in the thumbnail

@manueljr2974 3 жыл бұрын

Yo I love this channel so fun watchin him fix things

@ToxicYT 3 жыл бұрын

TronicsFix I love your videos, I feel like I learned something new from your videos everyday

@Natei 3 жыл бұрын

Great fix, I would have been totally lost. Little question though, will it not get worse overtime? I thought corrosion, unless you get every single bit off, is a timebomb

@Tronicsfix 3 жыл бұрын

Yes, generally speaking, you need to remove it all or it will continue to corrode over time.

@Natei 3 жыл бұрын

@@Tronicsfix ah right, thank you for the response, I was thinking of starting to buy some broken products myself so I'll know to stay away

@moustafaayhamzakri9609 3 жыл бұрын

I dont even have an xbox and i dont plan on getting one and i still watched the whole thing😅 its entertaining what can i say

@Tronicsfix 3 жыл бұрын

Thanks for watching! Glad you enjoyed it.

@juduking44 3 жыл бұрын

Its okay to be interested in the process. I dont like PlayStation or Nintendo, but Im still interested in how they build their tech.

@rikprince8414 3 жыл бұрын

Nice one! Glad to see you stick with it until it's working again.

@Tronicsfix 3 жыл бұрын

Me too!

@ionutgabriel8317 3 жыл бұрын

u saved my life man,my RB button was not working ,and i had no slightest idea how to pry open the controller,my button was amazingly behind bent and was not touching the plastic button,i fixed it works fine now,thank you for your tutorial how to open it!

@torbenmayer 3 жыл бұрын

The switch battery in his wallet - he did it again! Seen it on the last one as well :) But you can’t fit that in the ridge wallet 🤔

@Tronicsfix 3 жыл бұрын

Ha, ha...glad someone noticed that! That's true that you can't fit that in the Ridge wallet!

@torbenmayer 3 жыл бұрын

@@Tronicsfix You can rely on me, I was like the first and probably only one who pointed it out in the other video :p

@stephenkamenar 3 жыл бұрын

3:36 those ads at the bottom of the screen look... yeah

@stephenkamenar 3 жыл бұрын

looks like they're now blurred out lol

@happymondayclassic612 3 жыл бұрын

@@stephenkamenar what were they lol

@Daniel-it1dp 3 жыл бұрын

been looking for someone commenting at the time what as up with the blurred parts at the start....this kind of explains it

@MyklBlue69 3 жыл бұрын

Brilliant Steve! Well done, as always! 👍👍👍

@peterroy3052 3 жыл бұрын

Excellent result. Well done Steve.

@randellbigr1960 3 жыл бұрын

This is the type neighbour you would love staying next door to you :) ..... if your ever thinking of moving to scotland i'll let you know the best area to choose ;)

@Tronicsfix 3 жыл бұрын

Ha, ha...probably not but that's where my ancestors are from!

@NeoClip 3 жыл бұрын

You should make a new piece of merch with "When in doubt take out more screws"

@Tronicsfix 3 жыл бұрын

Ha, ha...that's a good idea

@Cringetopia 3 жыл бұрын

@@Tronicsfix or custom upgrade the micro usb to type c or the pro

@gooseman247 3 жыл бұрын

Good video, and a great learning experience for yourself. Enjoyed this a lot.

@jdog295 2 жыл бұрын

That genuine satisfaction that comes from fixing something. Priceless!

@sawyermack7739 3 жыл бұрын

I've always wanted one of those controllers

@Tronicsfix 3 жыл бұрын

Other than the smoke it's a really nice controller.

@ARXInfinite 3 жыл бұрын

I’ve had two the first had a few issues got a replacement and works great only thing the right bumper doesn’t respond sometimes have to press it hard or in the right place but that goes away after a while

@DrDornon 3 жыл бұрын

I have an Elite 1 and Elite 2. I really like my Elite 2. Well worth the money for the quality and customization.

@shadow_sith5102 3 жыл бұрын

Nice is there a ps4 version

@jimmyfallon4237 3 жыл бұрын

Ghostreaper 098 ones similar to it

@Syntax.error. 3 жыл бұрын

When I see "I don't know what is wrong with it" on eBay it's always water damage.

@lisandro3614 3 жыл бұрын

Same goes with a lot of Nintendo Switches. "It suddenly stopped charging" means "they pulverized the USB port to death".

@boof994 3 жыл бұрын

Palms sweaty

@Angultra 3 жыл бұрын

Chain smoker with sweaty palms, a deadly combination.

@wholeshow 3 жыл бұрын

I wish I had these skills and tools. Great content as usual.

@bvanbart 3 жыл бұрын

So awesome to see you fix stuff

@shinbakihanma2749 2 жыл бұрын

Great video, Steve. I have 2 questions: how many hours did the process take for you to repair this controller? And, what reasonable price would you charge someone for fixing this controller?

@bigminifridge 3 жыл бұрын

TronicsFix: “I paid $99 for a broken controller” Me: laughs in in $180

@davidf1805 3 жыл бұрын

I want to get one but it’s so expensive

@catman8173 3 жыл бұрын

@@davidf1805 It's worth it, I have a Xbox elite series 1 and I've had it for over 3 years and the grips just started expanding

@Valentijnpeek 3 жыл бұрын

Catman817 you got lucky I am on my 3th in 8 months

@catman8173 3 жыл бұрын

@@Valentijnpeek I'm glad I got lucky, there's no way I could afford a new controller every few months

@philipjnz9923 3 жыл бұрын

Dont forget the taxes! I paid nearly $200

@hungjimmy1821 3 жыл бұрын

This is a good end, thank you for sharing these step by step actions video.

@CJM46 Жыл бұрын

Thanks for your help here I just fixed my series 2 just saved myself a wad of money 👏🏼👍🏼

@chrisdunn833 3 жыл бұрын

I love a happy ending.

@Tronicsfix 3 жыл бұрын

Me too!

@maicod 3 жыл бұрын

I'm wearing a T-shirt with 'I'm the dude who broke this"

@Tronicsfix 3 жыл бұрын

Ha, ha...that's funny!

@maicod 3 жыл бұрын

@@Tronicsfix I found your Shirt funny too :)

@averagegamer9975 3 жыл бұрын

I repair consoles for a living and your videos have always been very helpful and Informative

@Tronicsfix 3 жыл бұрын

Great to hear!

@MT_Real_ 3 жыл бұрын

i'm feeling good watching how you repair xbox and other stuff

@persiano33 3 жыл бұрын

[[SPOILER ALERT]] I love how happy and satisfied he is at the end when he realizes the buttons work. I felt so happy for you, I love your videos, great job!

@Tronicsfix 3 жыл бұрын

Thank you!

@wopol538 3 жыл бұрын

0:03 You don't knoooooow me.

@Tronicsfix 3 жыл бұрын

Lol

@neilduarte1986 2 жыл бұрын

Don't wanna think where that controller been at. Great video man good job

@Jeffmorgan1991 2 жыл бұрын

Just added this mod to my controller, thanks for the great video was a lot of help. The only issue I have is a slight coil whine coming from daughter board. Can only hear it with the controller next to my head so not huge problem

@CasSpell 3 жыл бұрын

Tronix: Uses tool to remove each button carefully Me: Flips the shell upside down to let every button fall out 🤣

@Cabeza492 3 жыл бұрын

Haha that's true! Sometimes I'm in a hurry taking apart some device and suddenly I say to myself "wait wait... this is not something that Tronix would do... so take it easy and do it correctly!"

@QuickishFM 3 жыл бұрын

@@Cabeza492 Plot twist - Tronics only does it like that on camera and is reckless normally to save time

@pandepoo 3 жыл бұрын

Is there any way to fix stick drift on dualshock 4 if so do a video on it. Pls

@Tronicsfix 3 жыл бұрын

Yep...same way as in this video. I've also got another video coming up that shows all the ways to do it.

@pandepoo 3 жыл бұрын

@@Tronicsfix thanks for the quick answer cant wait for that up coming vid

@oliverb.5041 3 жыл бұрын

Hi! I'm a french fan of your channel. I love your videos that are really soothing to me. Very interesting and rewarding, i hope i will fix the world like you 😄👍!

@windowsxpprofessional 3 жыл бұрын

Good job! If you face an issue with analogue stick you may always use sewing machine oil, it helps

@Fanofwhom 3 жыл бұрын

When I see the title and you find it as a tricky fix, I’m surprised

@Tronicsfix 3 жыл бұрын

I'm actually not as good with controllers. I haven't fixed as many of them.

@FOREVER-qj3rt 3 жыл бұрын

@@TronicsfixI'm sorry to ask but my controllers right trigger does not work unless I blow in the controller any fixes you know?

@markkeener6675 3 жыл бұрын

@@FOREVER-qj3rt If you feel comfortable taking it apart, the pad for the shoulder button is probably dirty and needs to be cleaned. That's my best guess and where I would start troubleshooting

@korayhanhallo9407 3 жыл бұрын

This felt like an intense anime episode, where the protagonist is fighting the villian and comes out victorious in the end

@Tronicsfix 3 жыл бұрын

Ha, ha...true!

@vigminitaur5359 3 жыл бұрын

That was pretty cool, congrats on the fix. I only play on ps4 myself. Having bad vision I couldn’t see to fix a controller. Sadly I am a forgetful klutz.

@zZiL341yRj736 3 жыл бұрын

Perfect timing, the RB tactile switch on my Xbox One S Controller is broken. I'm trying to do a repair. This is a great video so many twist and turns but positive result at the very end. I've learned that the stick is calibrated onto the motherboard by Microsoft, so replacing it without calibrating the potentiometer will caused the dead zone to be off.

@tonytruong5896 3 жыл бұрын

That controller looked complicated when you opened it up

@Tronicsfix 3 жыл бұрын

They seem like that at first but they're really not too bad.

@jammedhands 2 жыл бұрын

I wouldn’t have ever been able to put it back together.

@tonytruong5896 2 жыл бұрын

@@jammedhands me too

@Mars3556 3 жыл бұрын

Honestly I think original Xbox one controller thumbsticks are better, I have the elite series 2 and I've used it for 3 months and the left thumb stick is already wearing out :(

@Tronicsfix 3 жыл бұрын

Interesting

@override7486 3 жыл бұрын

@@Ebolachicken say what? Cheese grime? Not the one I'm thinking about?? O_o

@sm00th77 3 жыл бұрын

Make a warrently claim on it. Most people forget, my headphones recently broke but luckily had 1 week left on my warrenty so sent them in and even got a newer model because my current ones were so old & discontinued

@override7486 3 жыл бұрын

@@sm00th77 And what next, after warranty runs out (1-year only I pressume)?

@luukie0000 3 жыл бұрын

Used mine alot. every single day for 9 months. thumbsticks seem to wear a lot less than the old ones.. you might just have a faulty one....