I RESTORE A PUTTER * DIY SCOTTY CAMERON LAGUNA * (Torched Oil Can Finish)

No video

I RESTORE A PUTTER * DIY SCOTTY CAMERON LAGUNA * (Torched Oil Can Finish)

Рет қаралды 348,807

Күн бұрын

Here we restored a Scotty Cameron laguna putter from rust to riches where we explain and show you our process.
Reach out to us if you’ve any questions about getting your putter done.
Where to Find Us:
Instagram: @scratchlessputters
Facebook: Scratchless Putters All content is for entertainment purposes only. Anyone attempting to restore should do so with proper caution, safety equipment and experience at their own discretion

Пікірлер: 329

@TWTexasA1 Жыл бұрын

I’m pretty sure it looks better now that it did when it was brand new….Great job 👏🏼👏🏼👏🏼👏🏼

@michaelbarber6200 Жыл бұрын

Love Restoration videos wish i still had my old Scotty superb job

@Jesser1121 11 ай бұрын

Scotty Cameron’s are easily the best looking putters out there! Especially the early to mid 2000’s

@scratchlessputters 11 ай бұрын

can't disagree!

@jonathond41 Жыл бұрын

Great job, that putter looks great now. Thanks for showing us the process you use

@ph469 Жыл бұрын

Wow.... very impressive. The final color is amazing!

@chrisdorgan8802 Жыл бұрын

Love watching these works of art take on a born again new look , I'd love to do this sort of thing when I retire as a hobby but you make it look way easier than it is. Awesome job

@scratchlessputters Жыл бұрын

Thank you so much!

@davidmuse7004 Жыл бұрын

Excellent restoration! Quality workmanship 👌👌

@booboojones2590 Жыл бұрын

Wow. Amazing. I found an old Scotty among my golf stuff. Maybe I should get it restored.

@Mikey32255 Жыл бұрын

Great work! Your craftsmanship is impressive.

@revinfool 10 ай бұрын

On the verge of doing this with a Yes! Putter that is being delivered sometime today. This has been very helpful. Thank you for all the tips.

@scratchlessputters 6 ай бұрын

this method works on carbon steel, so may want to verify head material

@OhioRiverFisherman Жыл бұрын

Wow!!!! Ur so skilled brother, I'm so happy for u!!!!

@bosullivan5462 11 ай бұрын

I have one of these putters... Bought around 1998 ish. Still as good as new.

@JockeyCake 11 ай бұрын

You did great job mate. Your patience is incredible.

@VADCI Жыл бұрын

Great job love that finish look you did. I'm going to try it, thanks for the insight in this video. I hope my putter will look half as good. Thanks again

@charliepepper3039 2 ай бұрын

I had one of these Laguna putters and traded it in back in the early 2000s like a fool.

@lv8591 Жыл бұрын

I just wish for club manufacturers would bring back these beautiful putters like Titleist Ping Wilson Taylor Made etc

@valderja Жыл бұрын

Beautiful work. I never knew how an oilcan finish was achieved. Loved the attention to detail with the paint fill too. You have a new subscriber!

@scratchlessputters Жыл бұрын

Thank you very much!

@CodKid14 Жыл бұрын

Great video! I want to do something similar with my own Scotty.. But it takes some big balls to do this with my current player! Thanks for the help!

@scratchlessputters Жыл бұрын

good luck! let me know if you have any questions

@screebee Жыл бұрын

looks brand new!

@steviek6484 Жыл бұрын

Amazing crafstmanship

@michaeldorphjrgensen8915 11 ай бұрын

Really amazing transformation. Great job 👍👍

@scratchlessputters 10 ай бұрын

Thank you!

@user-ps9ce8xz5m Жыл бұрын

WOW. Great job. Putter looks fantastic. Thanks for sharing!!!

@tombland7336 Жыл бұрын

Great video. Looking forward to seeing you do some colorful finishes for your clients.

@scratchlessputters Жыл бұрын

Thank you!

@johnhenderson9205 Жыл бұрын

Beautiful job.. very well done.

@jbplays7302 Жыл бұрын

Great job on this putter!! I'd like to see you restore one of the older tei3 Scotty's, like the Newport with the terrilyum inserts like you have on one of your short videos... I've got an old Santa Fe that needs refinishing. And I REALLY don't want to screw it up...

@scratchlessputters Жыл бұрын

I have a few in the shop, I'll keep that in mind for future videos!

@ilovewatr Жыл бұрын

That's an aspect ratio I haven't seen for a while! Great job! Makes me want to find an old Scotty and do one myself. It's a shame they also seem super expensive regardless of the condition they're in

@scratchlessputters Жыл бұрын

Definitely can do this yourself super easy. I know your right old beat up Scottie’s are so much, you should someday if you get the chance

@elconquistadorII Жыл бұрын

AWESOME Job !

@scratchlessputters Жыл бұрын

Thanks!

@aidanryan29 11 ай бұрын

Great work. You have IRISH heritage? Accent and words indicate yes 👏🏻

@marksabino1513 Жыл бұрын

Great work - looks fantatic!

@marksabino1513 Жыл бұрын

*fantastic...lol

@bobbykim7431 10 ай бұрын

Wow! You have a Magic hand!

@yskimu 2 ай бұрын

Restoration is beautiful job.

@scratchlessputters 2 ай бұрын

Thank you. Cheers!

@greglewis6504 Жыл бұрын

The Laguna is my fave model and this was an excellent tutorial. Looking to finding an "older" one in need of a makeover and do a bit of a proj where I can use it afterwards. Thanks.

@scratchlessputters Жыл бұрын

Thank you!

@Dslots_ Жыл бұрын

Looks great!

@danring505 Жыл бұрын

Nice work ✌🏻👊🏻👏🏻

@jamielahugh8316 Жыл бұрын

Putter looks sick

@Nick-m9s Жыл бұрын

Beautiful job tho sir!! Well done

@1962jrl 7 ай бұрын

Incredible job!

@lbhunter6341 2 ай бұрын

Beautiful job!

@williammcgeown710 Жыл бұрын

True artist.

@scratchlessputters Жыл бұрын

Thank you!

@2534will Жыл бұрын

beautiful work

@Designerboa Жыл бұрын

Wow! I'm impressed. Would you do my Newport 2 for me please.

@scratchlessputters Жыл бұрын

Sure just give us an email or message us on Instagram. We’ll help you out.

@johndublyoo2553 2 ай бұрын

If you must wear gloves when using a buffing mop make sure they're close fitting, those ones you use are just asking to catch the mop and pull your hands into it.

@Nick-m9s Жыл бұрын

Imma do a restoration and then make it look like the rat bastard from Scottie’s 2012 4 part video with a twisted neck.. couple welds beads on the back of the pitter head for some more weight and welded neck!! I’m excited

@njc964 Жыл бұрын

Looks lovely

@scarylove_era Жыл бұрын

incredibleeeee , I want this done to my scotty cameron asap

@harleymckechnie6833 Жыл бұрын

Wow. Excellent job.

@bigtex970 Жыл бұрын

That was excellent I'm going to try it on my old wilson

@kramerdesignco 3 ай бұрын

Turned out nice!

@bellsy13 Жыл бұрын

You should weigh it pre and post finish. I'm curious how much you took off. You said the deburring wheel could take off 5-8g's just from that. Great job again.

@nicholasthornton7000 Жыл бұрын

Wow!! Amazing! 🤯

@scratchlessputters Жыл бұрын

Thank you!

@benwebster9273 Жыл бұрын

Great video man, looks fantastic

@scratchlessputters Жыл бұрын

Thanks man!

@robertmiller6910 9 ай бұрын

👏👏👏 grand job Sir

@ultimatejay Жыл бұрын

Most Newer Scottie Camerons are stainless steel. You can do the same heat process with stainless steel and you don't need to quench it in oil because stainless will not rust.

@scratchlessputters Жыл бұрын

True! The newer stainless don’t produce the same colors but they don’t rust which is nice

@Mrcloc 11 ай бұрын

Wow! Well done.

@scratchlessputters 11 ай бұрын

Thank you!

@j0morales Жыл бұрын

edible job, amazing, thanks for sharing

@hjchoe6192 8 ай бұрын

I really enjoyed this clip, and I decided to follow your case with my old Scotty Cameron Tei3. But I have some questions: (1) Why beads blasting before torching? Would there be any difference in quality between with and without beads blasting before torching? (2) How long have you heated up the putter head with the heating gun before torching it. (3) What gas have you used in torching? Please, provide me with some tips.

@scratchlessputters 6 ай бұрын

Bead blasting smooths the minor imperfections in the putter that you may not be able to access with just the wheel. I usually heat up the putter head for about 5 minutes all over before torching, and use just a generic Butane torch you can buy at any hardware store.

@roalrios6781 Жыл бұрын

Great work!!!!….

@GeorgeGeorgecp Жыл бұрын

18:33 18:33 18:33

@janebir8713 3 ай бұрын

Awesome job

@markpacker5932 6 ай бұрын

That is my dream putter, and you made it even better! I love your paint fill process. What is your paint of choice? I tried so many, but have yet to find a real durable paint.

@scratchlessputters 5 ай бұрын

I use Testor's

@TheDomain16 Жыл бұрын

I have a Bettinardi stock 28 with a raw finish, any tips on giving it a nice finish?

@scratchlessputters Жыл бұрын

You can torch oil can it. Or gun blue it. I believe if your Bettinardi is made of soft carbon steel you can accomplish those finishes. You need to find that out first. If it’s stainless steel you could Powdercoat it.

@TheDomain16 Жыл бұрын

@@scratchlessputters the putter is carbon steel

@postmads1974 Жыл бұрын

I have an old Scotty Cameron gun metal and it has rust on it. I would love to get this done to mine. But I don't have the talent, persistance or the tools....

@Justanoldfart Жыл бұрын

Amazed 👍

@spencerdahl5281 6 ай бұрын

Great work! Is that a Yee-Yee hoodie is see??? I knew I liked you!

@rayhutcherson6226 Жыл бұрын

Very Nice!!

@kroon275 Жыл бұрын

Beautiful job

@manison7 Жыл бұрын

Amazing !

@jimscullion7466 Жыл бұрын

Absolutely stunning.......I'd be really interested to know, (for no good reason really), but do you ever weigh these before and after to see if the weight goes up or down and why?

@scratchlessputters Жыл бұрын

I don't, but that's a good call!

@braydenboyko8525 Жыл бұрын

That’s awesome

@MrBillSabre Жыл бұрын

Does it matter whether the putter head is cast? Does that limit what kind of refinishing is possible? Really enjoyed this, thanks so much

@scratchlessputters Жыл бұрын

what do you mean by cast?

@MrBillSabre Жыл бұрын

@@scratchlessputters As in not forged. I have a cheaper, fairly old putter that I just can't seem to get out of my bag. The face needs refinishing for accuracy's sake and it looks like ass. lol

@scratchlessputters Жыл бұрын

@@MrBillSabre it depends on the head material for sure. Stainless steel you can refinish/powdercoat, but won't get you the colors you get when torching carbon steel. I'd check what the putter head is made of. Tried a Ping once but won't again. It was made of manganese bronze and highly toxic to work with.

@viewfromrowb Жыл бұрын

As a owner of this same Laguna, I’m jealous my old gamer don’t look like that.

@scratchlessputters Жыл бұрын

Feel free to reach out on Instagram @scratchlessputters, I can help with that. Cheers

@Lamster66 Жыл бұрын

I tink it looks great

@blangfitt1 11 ай бұрын

Beautiful! Would love to send you a putter to restore!!!!

@dlenny3369 3 ай бұрын

This is class.

@16-bit-trip5 Жыл бұрын

Love the color. I agree thagt the milling work could be a little nicer but overall great work.

@milenadeltorto7158 2 күн бұрын

Wow! Fantastic job! I want to correct my Scotty Cameron phantom x which is black and has some chips along the top front edge. What kind of paint should I use? Acrylic flat?

@scratchlessputters Күн бұрын

I use Testor's enamel paint

@Shamedog Жыл бұрын

I now regret getting rid of mine but at least I have a mint California Napa.

@alexanderrock2414 8 ай бұрын

I have a pro platinum Newport 2 that really needs some love! I would be happy to mail it to you if you wanted to make a video to use for your channel

@Zim-wc2rs Жыл бұрын

Get in touch with Rick Shiels Golf and have him play some of your restored clubs! Would love to see them played again as they should.

@lynnpenland4277 11 ай бұрын

I didn’t take the time to scroll through the comments but do you take on restoration projects? I have a Scotty that has huge sentimental value to me that I would love to have you quote me on the restoration….

@Mibour Жыл бұрын

Beautiful

@markhappydude2542 Жыл бұрын

Awesome job you have done there it looks fantastic, Can I ask you what kind of oil did you used ?

@scratchlessputters Жыл бұрын

I use 2-stroke cycle (blue) dye and wrench oil. Any penetrating oil

@tg5298 Ай бұрын

Paint remover is quick and fast

@Rex-eo5cp Жыл бұрын

Do you ever mill the back bumpers on putters? Some of the old Scotty cameron newport 2 used to have milling on the back.

@scratchlessputters Жыл бұрын

Haven’t tried it but definitely will sometime.

@Rex-eo5cp Жыл бұрын

@@scratchlessputters I would be interested in paying for some work if that is something you can do. I can send you some photos of the one I have as example.

@neilglynn841 Жыл бұрын

Thanks for your advice

@kevinjager124 5 ай бұрын

You don’t need the music mate these refurbishment videos are far better when they’re quiet. Let the visuals do the talking

@ryanbarney519 4 күн бұрын

I’ve got a 1998 Newport 2, gunna give it a shot, what kind of deburring wheels should I use?

@Mu5hy84 Жыл бұрын

Class work!! Hint of an Irish accent?

@scratchlessputters Жыл бұрын

Yes sir!

@Mu5hy84 Жыл бұрын

🇮🇪☘️

@ttownneeds7020 Жыл бұрын

Looks great! Where are you located?

@scratchlessputters Жыл бұрын

From Ireland living in South Carolina

@DunnwellGC 10 ай бұрын

Dude that’s awesome. I’ve been trying my hand and have had some success haha. Or at least enough for to want to keep doing it. I was curious though, what kind of oil do you dip it in after the heat?

@gavinburrows1915 5 ай бұрын

Awesome

@mikeike429 Жыл бұрын

Yee Yee!

@bertlamboy3414 Жыл бұрын

Outstanding

@user-ip1ox7pu1g Жыл бұрын

Great work, fantastic craftsmanship! What type of oil do you use after the torching process? If you sprayed with water during the torch woukd you achieve an iridescent finish?

@scratchlessputters 6 ай бұрын

I use 1:1 2-stroke cycle blue dye and any penetrating wrench oil. Haven't done any water spray to date