If you want to support the channel further please pledge to my patreon. www.patreon.com/battlebrothersam Donate to the project and get your own personal model in youtube history! www.paypal.com/donate/?hosted_button_id=4DEDDFSBRDT3Q

I live in the UK too and XPS foam is indeed hard to get off. Instead, I buy insulation foam from B&Q or the like. It comes in large sizes and is cheaper, but the top and bottom faces are covered with an aluminium sticker. However, it's super easy to remove.

I never understand why people don't use epoxy glues on the massive models rather than super glue

J3d tech's cubes of calibration are ESSSENTIAL for printing 40k vehicles. Dimensional accuracy is so important when you're putting together tanks and knights to make sure everything fits as intended.

Waiting for the imperator 😉

GW really has a chance to lean into selling STLs for even small stuff like upgrade sprues (maybe even being cute about it and calling them STCs) or extras. The loss of people 'sharing' them would be tantamount to people giving away the rulebooks online as pdfs (which already happens to begin with) and only encourages GW to price them so that the effort of having to hunt down bootlegs just isn't worth it compared to the convenience.

"Warhound Class Titan of the Collegia Titanica on the prowl."

I use the Amera Labs Town Test. It's pretty damn reliable, tests a bunch of different things and has never steered me wrong.

what a champ

for me this feets made it look like a warchicken titan :D

I’m looking at what scale/ratio was used to get the exact measurements? Or is there an STL out there already set up? I’ve googled non stop but I’m not landing where I the right STL is for this.

I also printed a warhound. Just started painting it so much trim work to paint. Want to finish it but time is something I’m lacking. Keep up the great work.

I've printed a few warhounds for myself and my friends in the past, but only in FDM. I never got around to painting it however, but recently finally got an air brush... Time to see how big of a difference a resin warhound is to an FDM warhound (printed on a regular Ender 3) printing at 0.2mm layer height.

for the safest refilling do the followign: Wait for the layer to fully retract, pause the print. Fill the vat. Resume printing

Bro, your vids are so good, thank you for being such an inspirational icon to the community, I can't wait to get my photon mono x 2 working, only found it because of you.

Man I really gotta thank you for your videos. My father and I just got into Warhammer books and wanted to make minis but were very daunted by the price. Got a 3d printer, had no idea what we were doing (I still think we don’t lol), but found your videos and were able to print off our first few squads of marines! It’s been an awesome bonding activity to print, wash, cure, clip, and paint our minis together. Thank you!

Where did you get the STL ? i have a warhound but doesnt have the foot broken down

sunlu had a 10 year sale a week ago, i scored 3l of the grey ABS-like for about 50$, currently midway through printing a ta'unar with it. Love that resin, cheapest thing imaginable

the cones of calibration work well

What's y'alls opinion on sunlu nylon like? Vs abs

i basicly only use the cones of calibration from tableflip foundry it does take a long time to dial in but i never swich from one resin type to another so i only had to do this once and its been fine for the last 5 bottles ive done so far

wow i feel like im so late to the comments but lets see if you still see this i have the stls had them for a while now but i only had a fdm printer an didnt want to waste my time printing them and putting 100s of hours in to just getting them smoth. but i now have a sla so i was wondering is the file scaled to the right size to what GW sell or do i need to bump them up the head is 39.92 mm thats from nose to the ball and 27.36 side to side

Since I started back in 2006, I loved the Lucius pattern Warhound. Thanks to it's discontinuation about a decade ago, 3D printing is the only way I can hope to get one.

I don't use the same cure station, I have a Mars but I always cure my pieces for at least 10 minutes.

Pls look up images of the warlords legs before gluing! Almost glued one of the legs on backwards.

about how much does it cost for the amount of resin needed, just interested as I need one of these puppies and am about to get into resin printing myself.

You make me wish I could play again, I just got my first resin 3d printer, Unfortunately I had to stop playing due to medical issues, namely essential tremors. I drop and knock over models constantly and considering I'm a diehard Eldar player the model break all the time. But your video's are definately inspiring.

Does anyone know where I can find a good file for the Mars pattern Warhound? I'm struggling to find a good one. I thought I found one but when I download it half of the pieces are missing.

Cubes of calibration and I support my own models. When I do post cure, it is just for a few minutes, but if you thoroughly wash the model then you don't need to post cure.

Why didn't you pause the print then add resin and resume?

Does anyone has an idea where to get the stls for the warlord and warhound titan

I'm thinking to buy a saturn s . Will I be able to print models this size;;

Made a chaos war hound for me and now made a second imperium and starting a 3rd for some local game players. Don't understand why you didn't hollow out your pieces? Mine are so light weight warhounds it's nice. My file looks like same details but mine is also broke down into multiple pieces. I may have more time in assembly but hollow parts, light weight, less time, less resin. Didn't time mine but I don't think including printing hours were near 100 hours.

Can't wait to watch the warlord titan. That us one I'm wanting to get printed myself.

Where does one acquire the files for this bad boy?

Cones of calibration are prefect for exposure test (escpecially for supports). Other then that essentially the starship and the exposure test you used.

Easy composites sell xps foam in all sizes and shapes pretty cheap aswell from what I remember

So ready for the Warlord vids. Just subbed to your patreon after getting my resin printer (creality ld200h or whatever the name is) Have spent about 4 days on the cones of calibration test, just cause I work a lot and I might be a little slow. Anywho love your videos, wish you would do a video on prepping resin minis for painting or something. Would love to see that, as you are a good painter as well

Hey Sam, could you make a video where you show your complete collection of 3D printed models?

On the XPS foam side of things you can get it in Ireland- without paying the hobby tax. Both B&Q and Screwfix (who do deliveries) stock them. Not sure if either one is near you. If you try searching for XPS foam you wont always get the best result. They often label it under "Extruded Polystyrene Foam". Now to be fair it's not as thick as what you've shown their but I'm using it for Warmaster scale terrain so I only recall as big as 10mm but you can always glue it together and if you asked they might order it in. Keep up the good work.

With the foam, try looking in your local big hardware stores under insulation foam. It took me ages to find the right stuff in Australia.

I've found with most resins I've used I cure minis for 2 minutes because too much makes it too brittle and anything bigger and bases anywhere from 3 to 5 minutes

Hello i would like to ask where to get this 3d model for print thx for help

The supports were harder to remove because you used standard resin. ABS like resin has more flexibility, making support removal easier. I find that ABS leaves the raft easier to peel off in once piece, while standard causes it to chip away. I have no problems mixing the two however, but prefer ABS.

May the machine god continue to watch over your work Fabricator.

I have a ender 3 showing up today so I was going to try a hybrid, armor and visible parts in resin, loadbearing parts in FDM

Nice O_o. Does anyone know where we can find the file for this type of model?

question I am interested in 3d printing but i would like it if they were non toxic so I ask if you you know of a printer that could do that and do you have / could you please make 3d printing for dummies' ps could you do a start collecting / combat patrol for iron warriors heresy or 40k is fine please and thankyou

Sam, you gotta start making more vids of you painting the models!

I don't expect to get an answer, but where can I pick the warhound and reaver stls? I have a printed warlord, and I think it would be cool to have a full squad.

You're overpaying for resin.... Resin in Brasil costs 20USD/kg.

Damn Man! How are you getting these files!?

The STL files cost $800 or the official model costs that much?

the audio on this was super quiet

Do enjoy watching these videos and I would love my own Titan Legio with all the Titans including a Warmaster, but do not have the space for the full scale ones. Even if i did the Elegoo Saturn 2 can not even fit the shin armour of a Warmaster. But happy with Titanicus sizes.

look you.... why wasnt this like 2 weeks earlier? ive got like 2 more plates to finish mine. would have been sooner but i was having problems with the feet and hollow areas in the toes. i fixed it by jacking the exposure time im hoping it doesnt decide to leak resin at some point

❤

Oh god damit ! You finished before i did, gg

Why aren't you hollowing that model? In no way should that 1 part be 800 grams. I've printed the entire nids bio titan on my anycubic photon and it's only 400 grams because I hollowed it to about 1.6mm thickness.

Anyone know where these STL's come from?

Someone should come up with an auto refill rig for printers, maybe a little float valve setup or something...

3 seconds over cured the supports, 6 seconds would ruin the print, but a cure takes 5 minutes... never makes sense to me lol. I started hand flashlighting the peices, little longer for thick parts, less for thin. Untill the whole surface has that "dry" look.

I might have a go at printing the Mechanical parts in FDM and post processing them after to smooth them out to save a bit of money. Would probably make the thing mad heavy wouldn't it lol. I eventually want to tackle that Imperator Titan on Cults one day lol. The thought frightens me though lmao.

Where do people recommend for the STL files for Titans?

The nest part about refilling, is PAUSING THE PRINT 😭

Hey man. Your videos have been really useful in getting me to try it. What masks do you use for resin printing? Or what masks would you recommend? I’ve got an elegoo Mars 2 pro. Cheers

I will say that retract distance looks huge and the retract speed looks pretty slow.... I use 6mm retract at 210mm/min retract speed with this exact resin on a Saturn S and it handles it fine, I think you can shave a lot of time off your prints. As for calibration.... try the cones of calibration

I wonder can this print with a Bambu lab x1-carbon?

Thank you for your content, it is wholesome! Cracked on that WARLORD TITAN joke =) Keep it up! Also, probably you may make your videos a little bit more well-lited, it is hard to see the details in some of the scenes!

Sam your smashing it mate! Off to print my own warhound in resin to match its FDM brother next month 😊

Where'd you get the file/which search terms did you use?

How much did the resin cost? I definitely wanna build one but id rather not be asked by the people around me what it cost to make

Daft question... how close are these to the FW models?

most calibration tests are completely useless for mini printing, as they are tailored to prioritise "finest detail", the "cones of calibration" test however is designed to show the finest detail you can get without your supports failing, it's also an objective test, there's no "good enough by my eye", it tells you exactly if it is under or over exposing. EDIT: also, the cleanup of your parts is pretty awful, there's all that horrible scummy white stuff still on it. those wash and cure stations are horrid for this, I'd suggest a multi-stage cleaning, first stage is your "dirty" IPA, give the parts a good shake in that first to get rid of the bulk of the resin (this could still be the wash and cure station), then go to a mid stage which washes off all the dirty IPA (which gives that white scum) and get out the toothbrush to give the surface a nice rub, and then your final "clean" IPA, where again you're just going to give the parts a good shake in that to ensure a perfect finish. For this I just use mason jars with the flip top lids, and your IPA goes a LOT further as you can wait until all the pots have settled, pour off the top clean part of each of them, dispose of the gunky layer, put the skim from the dirty pot back in the dirty pot, and put the mid and the clean one down in the conga line only changing when your "clean" pot is looking murky or you're getting the surface detritus again. Your models and your painting process will thank you.

Where can i buy the files for this warhound titan? Is there a chaos version?

i cant wait to print mine im ordering 10,000 grams of resin to print mine soon

Cones and cubes of calibration are awesome for calibration

love the topic of the video and the video is nice and crisp but damn you a quiet dude lol

💀Jesus Christ bro, have you tried hollowing out the prints?

Hello everyone, just got into the 3d printing and go myself a mars 3 while the sales where still on. Any recommendations on resin? I'll join next month on the patreon, after recouping from the machine haha

Cool 👍

Foam, you get that at the hardware store, don´t go looking for it in hobby stores or hobby suppliers

People love titans

you want the warbringer i can huck you up

....dammit, every time i watch one of you videos, i get the *urge*, but i can do jack until i sell off a bunch of my older 40k stuff, and for the love of god i hate ebay

Roughly how much would it cost in resin to print the warhound, excluding fails. Want to print myself a Christmas gift

I cure for two minutes to the model and cure for two more minutes

I printed a warhound a couple of month ago and I needed 11 plates … 4 on my Saturn 1 and the armour plates (7 prints) on my anycubic mono 4K Now I’m planning to do a reaver, but mostly on the Saturn 😂

Bro that is one massive bit ha Its almost 1kg (after all its a estimate it gives you could be more than what it says) Jaysus lads ha| Also I cure for 30 seconds on each side for most models so 1 minute total in the curing machine, even with my tanks.

tend to cure for 10 myself but not sure if thats overkill but want to make sure there is no leakage so feel better safe than sorry

I cure SUNLU standard and abs like for about 8 minutes

BEHOLD THE TITAN RISES

I been wanting one of these for so long! But can't find where the stl are. Does anyone have a location I could get it?

From zero to hero first like done!😁

Bringing more fire!

I’m so happy I have these files myself

Let’s gooooo❤

Nifty

jesus you could have made that out of pla for way cheaper.

Hey Sam. Is there a way to get in touch about the warhound files. I want to know were you got them from so I can get them for myself. Do you have Instagram?