No video

I swapped out my EXPENSIVE Link g4+ ECU for a Budget Speeduino ECU

  Рет қаралды 7,649

DCwerx

DCwerx

Күн бұрын

I removed my link g4+ ecu and replace it with a Speeduino ecu on my sr20det powered bmw e30.
My website: www.DCwerxTune...
Remote EFI tuning and consultation
Become a Patreon subscriber to support the channel and gain access to exclusive EFI tuning content; / dcwerx
For all your speeduino ECU and accessories
www.wtmtronics...

Пікірлер: 38
@danielsonyShima5
@danielsonyShima5 Жыл бұрын
Coool! I'm finishing the install on my VW Santana (Quantum in USA) really cool seeing more ppl using Speeduino too! greetings from Brasil bro!
@Pedro-ke6xp
@Pedro-ke6xp Жыл бұрын
To montando numa bmw e36, bora popularizar a speeduino no brasil!!
@OpticDevilz
@OpticDevilz Жыл бұрын
OMG im so glad to see your still doing good. god bless.
@Thatdavemarsh
@Thatdavemarsh Жыл бұрын
I really like your tuner studio layout.
@SLYDIT
@SLYDIT Жыл бұрын
I'd be interested to see a comparison of the timing latency of the speeduino vs link...Ive seen comments that the speeduino retards timing as rpm increases due to timing latency lag.
@DCWERX
@DCWERX Жыл бұрын
I never had problems in the past but I did see the discussion about it. I will test it out myself
@exvils
@exvils 7 ай бұрын
had this problem in past, but it was due to optical sensor I've used.. at 1st no problem, then as sensor broke I swapped it for another one, then i noticed power fallen as rpm went up, then I identified the problem, swapped to m52 hall sensor and no more problems
@coquigatillo1
@coquigatillo1 Жыл бұрын
Hell yehaaa!
@TheMadman457
@TheMadman457 Жыл бұрын
Great video. Was this a ready-made speeduino or you made it yourself. I find it pretty hard to source the ready made ones. I have an SR I wanna put a standalone on for the longest while
@DCWERX
@DCWERX Жыл бұрын
You can get assembled ready to go speeduino ecu from DetonationEMS.com or speedyefi. Mine was pieced together with parts from wtmtronics.com
@marvacrewe9324
@marvacrewe9324 Жыл бұрын
Need to know the sensor ground from the ecu
@marvacrewe9324
@marvacrewe9324 Жыл бұрын
Do you have a wiering diagram for the speeduno ecu
@MrAntsman
@MrAntsman Жыл бұрын
using the OEM Nissan trigger in the CAS
@garyhurn6153
@garyhurn6153 Жыл бұрын
I would imagine it’s been swapped and was for the link ecu, they do a 24-1 wheel that slots straight in the standard cas.
@DCWERX
@DCWERX Жыл бұрын
I was using the stock Nissan disc with the link g4+ but swapped to a 36-1 disc for the speeduino
@MrAntsman
@MrAntsman Жыл бұрын
Ok so would not recommend using the stock wheel with the speeduino
@lobotomyy
@lobotomyy Жыл бұрын
@@MrAntsman doesnt even work, stock nissan cas is 360
@DCWERX
@DCWERX Жыл бұрын
@@MrAntsman the stock disc doesn't work well with speeduino and many other ecu
@luiscruz-no3ib
@luiscruz-no3ib Жыл бұрын
Can a speedduino be use to control a electronic transmission
@DCWERX
@DCWERX Жыл бұрын
Not directly, however there is available additional hardware for that
@alistercharles1453
@alistercharles1453 Жыл бұрын
Did it really start up that easily?
@DCWERX
@DCWERX Жыл бұрын
Yes
@JoJoGator
@JoJoGator 7 ай бұрын
how bad is the latency on live data with the Bluetooth?
@DCWERX
@DCWERX 6 ай бұрын
It's decent
@kelvinleong915
@kelvinleong915 Жыл бұрын
Both u try same Perfomance? If take dyno chart both nice
@DCWERX
@DCWERX Жыл бұрын
Yes that's the plan. I will compare to old dyno with link ecu
@kelvinleong915
@kelvinleong915 Жыл бұрын
@@DCWERX so How u think about speedunio ?izzit worth To use cause i still think link better or budget speeduinio
@kelvinleong915
@kelvinleong915 Жыл бұрын
@@DCWERX cause i cant Find any source on KZfaq speedunio tune can reachs 400hp 🤣worry i get a wrong stuff in soon
@DCWERX
@DCWERX Жыл бұрын
@@kelvinleong915 the ecu doesn't have a hp limit
@kelvinleong915
@kelvinleong915 Жыл бұрын
@@DCWERX ok
@dentonhoudhan6439
@dentonhoudhan6439 9 ай бұрын
Is this in Jamaica?
@DCWERX
@DCWERX 9 ай бұрын
No St Lucia
@XeeDooX
@XeeDooX Жыл бұрын
I'm planning to test the speeduino for first time on my 1ZZ-FE DBW. I have used megasuirt in the past,but I want to try the speeduino. I am waiting for the BOM and soon will start soldering. Do you know if I can find a base tuning file for the 1ZZ ? Thanks.
@DCWERX
@DCWERX Жыл бұрын
I provide basemaps as part of my service at DCwerxTuneddcwerxtuned.com/product/basetune-and-e-tune-service/
@XeeDooX
@XeeDooX Жыл бұрын
@@DCWERX Thanks, After I get to the basmap moment, I will have that in mind.
The Best Value Standalone ECU - Speeduino
12:03
Making for Motorsport
Рет қаралды 235 М.
Which ECU is Right For You? - REFLASHED OEM vs STANDALONE ECU
20:15
driving 4 answers
Рет қаралды 267 М.
Blue Food VS Red Food Emoji Mukbang
00:33
MOOMOO STUDIO [무무 스튜디오]
Рет қаралды 7 МЛН
Running With Bigger And Bigger Feastables
00:17
MrBeast
Рет қаралды 154 МЛН
拉了好大一坨#斗罗大陆#唐三小舞#小丑
00:11
超凡蜘蛛
Рет қаралды 6 МЛН
Which Speeduino Board Should You Use ?
19:07
DCwerx
Рет қаралды 23 М.
Building the Speeduino Standalone ECU - Against the Clock
17:54
Making for Motorsport
Рет қаралды 124 М.
What to BUY when setting up a SPEEDUINO (open source ecu)
2:39
After Earth Arcade
Рет қаралды 7 М.
Is a Standalone ECU Worth It?
24:47
Donut
Рет қаралды 3,1 МЛН
Acceleration Enrichment Tuning - Speeduino
15:22
DCwerx
Рет қаралды 12 М.
This Is The BEST Budget ECU For Your Honda (Cheaper than S300)
13:40
Humble Performance
Рет қаралды 64 М.
Blue Food VS Red Food Emoji Mukbang
00:33
MOOMOO STUDIO [무무 스튜디오]
Рет қаралды 7 МЛН