I TESTED More Viral Woodworking TikToks

Рет қаралды 816,599

Күн бұрын

I TESTED More Viral Woodworking TikToks
Total Boat Epoxy - SAVE 5% : www.totalboat.com/MALECKI5
NEW SAFETY GLASSES NOW AVAILABLE FOR PRE-ORDER!!
bit.ly/ShopShades_YT
Want to see more crazy Tik Tok Videos
I Tested More Viral Woodworking TikToks - • I Tested More Viral Wo...
- I Tested The Most Viral TikTok Tools!: • I Tested The Most Vira...
- I Tested Viral Woodworking TikToks: • I Tested Viral Woodwor...
- Testing Viral Woodworking TikToks Again...: • Testing Viral Woodwork...
- I Tested More Viral Woodworking TikToks!: • I Tested More Viral Wo...
I TESTED 'Turning A FREE Pallet Into A $600 Table' - • I TESTED 'Turning A FR...
SQUIRRELLY PUSH STICKS - bit.ly/JM_SquirrellyYT
MERCHANDISE - johnmalecki.com/
PLANS - johnmalecki.com/collections/d...
SAFETY GLASSES - amzn.to/2zhWvRl
Proudly Supported By:
Timberland PRO - bit.ly/JM_TimberlandPRO
Oneida Air Systems - bit.ly/JM_Oneida
Lincoln Electric - bit.ly/JM_Lincoln
Total Boat Epoxy - SAVE 5% : www.totalboat.com/MALECKI5
My Top Tools and Product Affiliates
Woodworking Tools - kit.co/JohnMaleckiBuilds/wood...
Metalworking Tools - kit.co/JohnMaleckiBuilds/meta...
Favorite Finishs - bit.ly/JM_Rubio2021
My Camera Gear - kit.co/JohnMaleckiBuilds/came...
#Viral #TikTok #Woodworking

Пікірлер: 680

@deathwatch76 Жыл бұрын

The battery trick works on the basis of a balanced charge. the charger won't charge if the battery is below a certain Amperage. By using another battery, you are getting the "bad" battery above that cutoff voltage :)

@maddogshwa Жыл бұрын

Thank you! I was wondering.

@deathwatch76 Жыл бұрын

@@maddogshwa You are welcome. I found this out with some batteries at work we use for a server lift. The internal charger wouldn't charge because it thought the low voltage was a dead battery.

@pitsahat2 Жыл бұрын

Is there some risk to this method? It seems like you are basicly doing a short circuit for this to work, but I am not good with electronics that's why I am asking.

@deathwatch76 Жыл бұрын

@@pitsahat2 There is but minimal. You are just making a closed loop. Battery A and B basically swim in the same current pool. As long as you don't crosswire and keep an eye on it. You should be fine. Greatest risk is an internally shorted battery

@pitsahat2 Жыл бұрын

@@deathwatch76 ah, ok. Thanks, mate.

@baseballjustin5 Жыл бұрын

The video started getting a little laggy (for me) after you poured the resting for the Crayon Melting

@SuperVistaprint Жыл бұрын

There were several stutters before, but not as long in duration

@1986krazy Жыл бұрын

Same

@DVolk-ib2ly Жыл бұрын

Some Shots feelt like 12-24 Fps

@kindalost1 Жыл бұрын

Bad render

@timsawyer9231 Жыл бұрын

Good, I kept reloading thinking I was having issues on my end.

@RookieLock Жыл бұрын

You should totally do one of those carving tables.. Maybe you can find the dude that makes em' and do a collab with him.. That would be sick. Looking forward to the aluminum river table, that looks wicked. That aluminum could totally be brought to a mirror finish.

@stevenbliss6484 Жыл бұрын

So awesome that people are talking about the chainsaw carved tables. Dude is from my hometown and I am living near Pittsburgh now. I would love for John to colab with him although he doesn't have a KZfaq channel that I know of. I know right where Scott,'s (the chainsaw carver guy) shop is and drive buy it quite often.

@digit000000 Жыл бұрын

It's likely that they're pouring Tin, which melts around 450° F, not Aluminum which would be around 1200° F. The flash point of wood is around 700° F, so it's likely they're using the former rather than the latter. The finished product would look very similar.

@mikelawler2278 Жыл бұрын

Ira uses Aluminum and he does some amazing work

@ayreface1 Жыл бұрын

@@mikelawler2278 Yeah, even in the clip is glowing orange when he pours it, heh

@R__A Жыл бұрын

Where have you fiund this info that wood has a flash point of 700f?? As I’ve found a few sources saying wood doesn’t have a flash point, only an ignition temperature… in fact flash points are only common in liquid substances…

@Caro2Late 8 ай бұрын

@@R__A You're right. I'll add this note to it: A flash point is not where something starts burning, but will burn when you set it on fire. While an ignition point of something is a temperature where a material will start burning on its own.

@ByrdTheWyrd. 9 ай бұрын

4:52 I love how as soon as it's for Annie you seem to immediately start wanting to do so much better (bevel the edges, sand down, etc)

@jakesacco264 Жыл бұрын

Definitely do an gator/croc/snake table. I wanna see how it’s done!!

@noahboock Жыл бұрын

*builds a table with a croc shoe on it*

@maxmotors9497 Жыл бұрын

Me too I’m a carver and I’m thinking about how I could do it but none of the ideas I have so far seem like any fun haha 😂

@1steelcobra Жыл бұрын

@@maxmotors9497 The fastest is probably just to CNC down from a thicker slab to the rough details, then finish the precision stuff by hand.

@DV8.1 Жыл бұрын

Yes for the alligator/crocodile top please

@Stan_the_Belgian Жыл бұрын

Yes please but it does not look like an easy tik tok hack

@MrPanohead Жыл бұрын

Yes, although an original shape would be better.

@CrabCracker Жыл бұрын

Time to do the Squirrelly sculpture table.

@Foxdavid7 Жыл бұрын

The battery was somehow discharged under rated voltage so the charger is not recognizing It's the right battery thus not charging. But this hack is really sketchy as quite high current can flow between batteries. When trying to revive undervoltage battery it's better to use bench power supply with current limiter to avoid risk of having fireworks in workshop.

@MCsCreations Жыл бұрын

That's very true. If those were LiPos, it would've gone boom. 😬

@bogmaerke Жыл бұрын

Mathias Wandel has a good video on dead cells in tool battery packs. I'm willing to bet this is a similar, if not identical, situation.

@TheDiosdebaca Жыл бұрын

Well you're no fun...

@brmakers Жыл бұрын

Yeah agreed... Very high C that probably is a lot higher then this batteries can handle... Big chance to destroy the good one doing so!!! It is a great bad idea. Using a power supply should work fine!!!

@Dakarn Жыл бұрын

@@MCsCreations Even Li-ion can vent with flame. It was always fun in the tech room when you started smelling somethin' funny. lol

@tburda823 Жыл бұрын

I love when you do the dusty lumber co joints. It shows how difficult they really are when someone with all (most of*) the tools and plenty of skill struggles with them. Definitely do the carving table too looking forward to those future videos mentioned in this one.

@TheYvesable Жыл бұрын

That´s a scam!

@dtanner7 Жыл бұрын

Be sure to message John, could be tooootally not a bot

@researchandbuild1751 Жыл бұрын

Dusty co is clearly using basswood. Otherwise it would crack and splinter. Just watch the part where he chisels that angle, no wood carves easy like that except for wood made for carving, like basswood.

@billyjoemcglasson1420 Жыл бұрын

Just a heads up if you do that aluminum and wood table top make sure your wood is completely dry any moisture from the wood will cause the aluminum to explode.

@davids8493 Жыл бұрын

Very good tip that I personally would not have thought of. Saves a call to 911. Thanks.

@techexamined Жыл бұрын

I totally tried the battery trick years ago and it worked.. don’t let the batteries die again they will error out again.. lol.. I definitely want to see the aluminum and animal table videos!! Those would be epic.. Great video!

@bengrogan9710 Жыл бұрын

the chargers are designed to look for a minimum voltage - if its below that threshold it will not charge as the manufacturer assumes that several cells are defective if that low and they don't want to have a battery fire lawsuit when a cell explodes the bridge wires allow some charge to enter it, allowing it to then be above the threshold

@bazilwreckerloughead Жыл бұрын

I REALLY want to see you make one of those carved tables! The other day I tried to come up with a carpentry pun that woodwork, I think I nailed it, but nobody saw it!

@maxmotors9497 Жыл бұрын

Take that to wood by wright!😂

@BearBoxBreaks Жыл бұрын

Can't wait to see the aluminum river table. Love the videos John. Very entertaining.

@Vickie-Bligh Жыл бұрын

Love the Annie sign. She's going to love that her daddy made it for her. Thanks for sharing this John.

@johnnyb95678 Жыл бұрын

So much fun to watch you take these on. Also really appreciate that you always keep it real and don't cover up your learning as you try stuff. Can't wait to see you try the snake or gator table. Looks awesome!

@TotalBoat Жыл бұрын

Annie is so lucky! That signed turned out pretty cool for sure!

@OtherThanIntendedPurpose 11 ай бұрын

somewhat related to that crayon one, when I want to do an inlay pn the top of boxes, I rout out the words or line drawing, using the smallest dovetail bit I can find, usually 3/16 or 1/8. then I fill it with solid core solder, and run over it with the soldering iron to melt it. it fills in the undercut, which locks it in. then scrape the top flush with the wood. looks really cool and is SO much easier than other line inlay methods I have done.

@SchysCraftCo. Жыл бұрын

Wow that table is amazing. Can’t wait to see more videos soon. Keep up the great craftsmanship and hard work my friend. Fab On. Weld On. Keep Making.stay squirrely. God Bless.

@tooljunkie555 Жыл бұрын

YES U DEFINITELY HAVE THE TOOLS & SKILL TO DO THE SNAKE TABLE THAT WOOD BE INSANE TO SEE! AND The crayons/epoxy works I've made like 50 commissioned signs and table tops glad to see u back!

@MrJimmyTheJoker Жыл бұрын

Wow I timed looking for a new video well 😂 been really enjoying your stuff and getting into woodworking, thank you for all the videos!!

@PhiceT1917 Жыл бұрын

The battery thing reminds me of an old mechanic trick for trickle chargers. A lot of time they won't initiate a charge is they're dead flat, so you hook one good battery up to the flat one to get some pixies dancing around, the trickle charger sees it and kicks on, then you unhook the good battery. Some kind of safety mechanism I think. But who needs safety when you've got stuff to do lol

@animationcreations42 Жыл бұрын

I always keep an old battery topped up just for this, it's too dead to use for the car, but it's enough to give life to other batteries! I also have one of those cheap and nasty battery chargers just for reviving dead batteries, it just pumps out 12V so will charge a fully dead battery. Once it's got a bit of juice in it, I'll move it over to the 'good' charger!

@bengrogan9710 Жыл бұрын

You're right it's a safety, if below a certain level it's usually a sign of defective cells (A 12v Carbattery is actually 6x2v cells) and forcing charge into defective cells can either overheat them and spill the battery acid in lead batteries or cause the forbidden Capri-sun in Laptop/Phones

@ObsessionChange Жыл бұрын

Am I the only one that had crazy anxiety because he didn't fill in the dot of the i in her name??? Buddy, I'm sure you did it off camera, but come on, that's killing me 😂

@mandicivan270 3 ай бұрын

1:53

@pamelah6431 17 күн бұрын

Anxiety? Over a dot on a youtube video? 🙄

@markhopkins7204 Жыл бұрын

Gonna try the crayon sign for my grandson! Once again, inspiration is a gift that becomes art! Thanks Mr Malecki!

@triciaramirez1886 Жыл бұрын

Do the aluminum table outside please ❤⚓️❤️

@Wolfdx39 Жыл бұрын

Love the Dusty Lumber Co. joints, super challenging even with the 12" radial arm saw.

@TheYvesable Жыл бұрын

SCAM!!

@ajames7139 5 ай бұрын

@@TheYvesablewtf are you talking about??

@TheYvesable 5 ай бұрын

@@ajames7139there was a guy posting scam messages which have been deleted by now.

@JJE2010MO Жыл бұрын

The gator table is super cool !!! PLEASE MAKE ONE!

@alumaven Жыл бұрын

I can't be the only one that used to melt crayons over the heater vent before geting my butt kicked on a weekly basis? This brings back childhood memories

@Kemikalgeneral Жыл бұрын

...and dipping the tips of your fingers in so you have crayon fingers? 🤣 ...me too

@kennethbezanson4266 Жыл бұрын

I've been loving watching the reality of these tiktok videos. Someone needs to test them out and I think you're the perfect person for the job! Only critique is the pink crayon should have come before the red for the transitional flow of colors. Beautiful concept and I'm sure your daughter loves it!

@MrCoolAttitude Жыл бұрын

I don't follow much on tiktok but I def like the compilation over here.

@jeremymcmurrin6311 Жыл бұрын

I love that the guy with the giant wood shop uses the same excuse as us. Well I don't have that tool lol. Great job John

@TheYvesable Жыл бұрын

SCAM

@mich89626 Жыл бұрын

That janky battery fix got me HART. I will have to remember this trick. Also, I’m a gators fan so I’d love to see a gator table. Also, if you need said table to go to a home I have one for it. 👍🏻

@c.a.g.1977 Жыл бұрын

That crayon trick is pretty cool! And HECK YEAH JOHN: make a crocodile!

@EricAndMirna Жыл бұрын

John, I just want to say that I REALLY get a huge kick out of your videos! This one hits the mark…AGAIN! I have a couple of dead Ryobi batteries that I might have to play Dr. Frankenstein on (It’s ALIIIIIIVE!!!). Plus, my daughter happened to look over my shoulder while you were making the sign for your daughter. I now have a project to complete!

@Zogg1281 Жыл бұрын

Those animal carved tables look so cool and I'd definitely love to see you try to make one 👌👌👌👌👌👌

@ginger_nosoul Жыл бұрын

Id love a sweet desk name plate like this. Business opertunity blossoming? 🤔

@rfoline1 8 ай бұрын

Yes alligator yes snake….. maybe snapping turtle shell could look awesome!!!

@vee_tinymoose Жыл бұрын

Mad props for managing that joint without the fancy tools!!

@scgeyguy 12 күн бұрын

That battery trick is resetting the onboard the battery lipo charge control. I use that trick to rescue medical batteries from recyclers. It usually only takes a second to reset the style I get.

@d.mat.zero6525 Жыл бұрын

yeah those table carvings look amazing, you should give it a try FULL SEND

@stevemiller5119 Жыл бұрын

WOW, that battery hack was awesome!!

@mikec2810 7 ай бұрын

Fun video that was a tough joint to make!

@larrysimmons7084 Жыл бұрын

Love these videos, love your channel. And yes please do the carving table.

@AHMi-ArmandsHandsMadeIt Жыл бұрын

Heck yeah!!! Make an awesome table!!🤟😎👍

@wharfrat360 Жыл бұрын

It would be absolutely killer to see you take inspiration from ol' Dusty Lumber Co. and design a build using that joinery he's so known for! Lookin' forward to the carved and aluminum table. Don't make them separate put those two together!

@0rder666 Жыл бұрын

You schould definitely do those tops. But why is the video so shaky and low quality this time?

@aglioolio3180 Жыл бұрын

The only thing I like about tiktok is you doing these videos

@Wild.Dynamics Жыл бұрын

Definitely do the alligator table video! Or collab with another channel to do it!

@strangequark64209 Жыл бұрын

That battery trick was cool, I need to know the science behind that.

@DarthG33k 6 ай бұрын

For the crayon epoxy sign, you might have better luck throwing it in the oven at 200°F for about 15 minutes.

@jakefears06 Жыл бұрын

Carved table for the win! A snake or fish coming out of water would be saweeeettt!

@grigeroz Жыл бұрын

Heck yeah! You should definately do gator!!

@Brazos_Bait_Co. Жыл бұрын

Please make one of those alligator tables!!!!!!!!!!!! It would be really cool if carved a Gharial Crocodile!!

@yoursweetheart85 7 ай бұрын

My boyfriend and I recently started watching your channel. We enjoy the content. Did your daughter love her crayon creation?

@EdHadder 4 ай бұрын

I Absolutely Love Your Videos Bru 🩵

@superwavess 8 ай бұрын

Pine is such a pain with hand tools. Appreciate that you're not doing everything all too perfect like other KZfaq woodworkers!

@jonduncan8010 Жыл бұрын

Do the carved table but it’s gotta be full send, do a swimming moose!!

@monteglover4133 Жыл бұрын

A shop without a radial arm saw? Every needs one, the most versatile saw I own

@chrism.7038 9 ай бұрын

Those reptile tables were beautiful. Immediately went to watch those videos.

@Max-ji5cg Жыл бұрын

Are bandsaws intended to throw off as many sparks as a Power ranger fight scene?

@darthsirrius Жыл бұрын

Alligator in the table is pretty cool and all, but if I were you I'd do dinosaur bones. Now that would be a rad as hell table.

@evilpenguin219 Жыл бұрын

The batteries work that way cos the charger has a self test, if the battery charge is too ran down it can be dangerous to charge them, doing the battery to batter adds a lower amount of charge to push up the dead battery very slowly. It's still not 100% safe so have a sand bucket and extinguisher on standby, but can work. Also... instead of bare wires I made a set using crimp on spade connectors, means no loose wires can touch something they shouldn't and they just slot into the contacts

@Tufenuff83 Жыл бұрын

Where were those sparks coming from when you was using the bandsaw?

@applesauceisgood32 Жыл бұрын

These are always funny to see, makes me wonder who actually does a lot of these expecting them to work.

@bjornronaldson6017 Жыл бұрын

Definitely want to see the gator / snake table and the aluminum river table!

@MBarker397 Жыл бұрын

Dude, you have to make one of those alligator tables!!

@ravenheart1439 10 ай бұрын

Yeah dusty has joinery perfected forsure and he has ALL the tools, incredible...you John are fun to watch you have a A1 personality and have a ton of equipment lol...super good builder as well man

@KateInTheCity Жыл бұрын

We had a student make a couple tries of the poured aluminum into a slab at the college I work at. They made a base under the slab with sand. Both tries did not come out particularly well and the smoke from the burning wood was a lot. I'd recommend trying it outside.

@ColonelSandersLite Жыл бұрын

You know what would be a better idea? Don't try this one at all. Molten aluminum can explode. It's more energetic than diesel by volume. It requires *very* careful handling to be done safely. If you google it, you can find *plenty* of pictures of aluminum manufacturing plants that have had catastrophic explosions.

@raynobles3736 4 ай бұрын

I love the rainbow sign

@seb.marine Жыл бұрын

Dude Please make a snake table I love your videos and it would be fun to see you try it

@gregdietz3590 Жыл бұрын

You can also just leave the bad battery in the charger and quickly plug in and unplug the AC cord into an outlet. This sends a little voltage surge to break up the internal crystalization that is preventing it from recharging...a little bit easier.

@randomlinuxuser Жыл бұрын

Crystalization only happens in lead acid batteries and hand tool batteries are typically Li-on. Not to mention decrystalization techniques don't actually work, as Great Scott discovered in a recent video. What you're actually doing when you quickly plug and unplug the cord is providing a little bit of charge to the battery before the battery charger registers that it's too low to charge and errors out.

@JJE2010MO Жыл бұрын

John, why was the band saw throwing sparks off that wood?????

@sandynix5268 Жыл бұрын

Clean manual work is what makes a good carpenter - anyone can operate machines.💁🏽‍♀️

@jpmolony281 5 ай бұрын

Your editor didn't catch that Croods reference! "Sweet babbling brook"

@RokkuAni 5 ай бұрын

Battery jumper method don't always work. Depends on the Bms ( battery management system) on the batteries. 40/60/80 are much harder to restore. Cable gets really hot too..

@edswanson3941 Жыл бұрын

Carved table is a must see/do!!!!

@Mrmhibbert 3 ай бұрын

Put spade connectors on the wires if you do it often. It's because the charger is a smart/balance charger in theory... So needs enough charge to actually recognise all the cells. Hooking them up gets enough charge for charger to recognise all cells

@jaredperlman2534 Жыл бұрын

The crayon and resin thing looks amazing

@chosencraftco Жыл бұрын

*I almost can smell the melted crayons 😂*

@alfonsoPina Жыл бұрын

That last joint was a, well, a joint. You did quite well all things considered.

@pmdinaz Жыл бұрын

Favorite snack of the 0311!

@stevesoles9553 Жыл бұрын

Heck yeah I want to see an alligator or snake table made! Those look awesome! Great vid man!

@samanthahughes7783 Жыл бұрын

I just found your channel, and I’m so glad I did. 👍🏻😀

@jenniferlawson1678 Жыл бұрын

Instead of an alligator or snake, maybe you should make a family of squirrels running up the tree/table. Can’t wait to see the aluminum pour video.

@ReVerthex Жыл бұрын

His joint looks like a school project lol XD I guess you need to practice more John ;)

@quavydavey Жыл бұрын

You need to meet up with Dusty Lumber Co and do a video on each others channels, would be so fun to watch.

@stevennihipali3607 Жыл бұрын

I tried multiple brands in wood working... it turned out pretty cool

@ganjalfcreamcorn8438 Жыл бұрын

what does that even mean? lol

@towboatjeff Жыл бұрын

It's crazy how ol dustylumberco makes those joints look.

@SenselessUsername Жыл бұрын

Why the crayon not on a relatively low temp in the oven? Less spill/blowover to clean up, less chance of wood warping as more evenly heated around. And the lazy way for those pockets at 14:00 is Forstner bit plus large dowel instead of that rectangular block?

@Nick-ih5em Жыл бұрын

Yes. Make one. For sure ... 🍻🍻🍻

@mfelton7041 Жыл бұрын

Loved the video. Looking forward to the aluminium attempt

@hubertanderson7044 4 ай бұрын

That really works I’ve done a few like that

@carolbuzelim 5 ай бұрын

Is so cute that he talk about his daughter all the time

@michaelhines1891 Жыл бұрын

Anyone notice his band saw throwing sparks all over the place?

@iambear.6526 Жыл бұрын

What's with the video randomly going to 10fps?

@vladomie Жыл бұрын

I actually enjoyed the meatball joinery ...it made me feel a little better about myself 😀

@markduggan3451 Жыл бұрын

Yes please, can you try the alligator carving.

@davids8493 Жыл бұрын

What's with the sparks on the bandsaw. Something doesn't seem to be set up correctly. Dusty always uses blocks to keep his chiseling square. Good video.