I toredown this Hornby 8F and was shocked

Рет қаралды 6,386

9 күн бұрын

Buying second hand locos can be a blessing and a curse. I always do a full service on second hand locos becuse you never know what you might find on closer inspection.

Пікірлер: 25

@ianturvey3894 5 күн бұрын

I would suggest that if you’re going to glue lamps on brackets, then use a PVA type glue as it’s water soluble. It dries clear and can be easily removed without damaging the paint work. You can also use this method to secure weights in place too. Good instructional video by the way!

@DaveAtLittleton 5 күн бұрын

That is a great tip, I think when starting out you just assume Polycement is the way to go as it comes with Airfix kits and so there is a strong association there and so people, including myself, fall in to that trap.

@knottyal2428 6 күн бұрын

All good advice, and even more so if you model in N gauge! Tiny quantities of oil particularly, and blot off the excess with a paper towel or cotton bud! Keep the wheels and pickups clean as well.

@DaveAtLittleton 6 күн бұрын

Thanks, Yes I have one N-Gauge loco (a LMS 4F that I picked up for £25), after a fiddly clean it is a speedy little thing!

@markabbott358 3 күн бұрын

Ignore the keyboard warrior criticsm about your production values, I suspect they have never tried to run a You Tube channel or create content, you will of course improve with experience, what matters is the content, which was most helpful for new modellers or modellers who want to buy second hand, and improve their purchase. It was most helpful, and is why we watch these videos. I also watch OO Bill, Ians N Gauge, and Chadwick Model Railway, they all do good stuff some of which I would never attempt, but is still worth following to learn from them. Charlie is also running U Tube channel development workshops so it might be worth you investigating if you want to enhance your craft ? I have subscribed and look forward to your future content.

@DaveAtLittleton 2 күн бұрын

Thank you for the very kind words Mark. I'm not sure I will ever reach Charlie's standards but I am with practice my videos will get better. My videos are all very different at the moment as I am still trying different ways or making & editing videos and working out what works well for me and what people like so thank you very much for the feedback 😊

@dibsyardshuntinglayout 8 күн бұрын

Been following you for a while on Instagram, but just realised today you have a YT channel too!

@DaveAtLittleton 8 күн бұрын

Yeh, just me rambling, feel free to watch with the sound turned off! Nothing on my channel as good as you produce

@dibsyardshuntinglayout 8 күн бұрын

@@DaveAtLittleton don't be so hard on your self, Dave. Good advice you gave about that loco!

@briandugan4974 7 күн бұрын

That’s the worse 9F I have ever seen. 😊 Set of wheels missing for a start.

@DaveAtLittleton 7 күн бұрын

@@briandugan4974 haha, I best change the title!

@crewelocoman5b161 6 күн бұрын

You are quite correct about purchasing second hand, it can be a blessing or a curse. However, I wouldn't have touched this one on seeing the damage done to the smokebox, handrail, broken vacuum pipe. In my experience, if it looks clean/as good as new it usually is just that, and that goes for the running characteristics as well. Again if the purchase was made with a makeover in mind then that is another consideration.

@DaveAtLittleton 6 күн бұрын

True, I have had some beautiful bargains through second hand. With this one, I didn't plan on having it weathered, I would have preferred pristine, however, I am not adverse to having it weathered, and so a slightly cosmetically tarnished loco with be the perfect candidate for me to dip my toe in the water in that area.

@crewelocoman5b161 6 күн бұрын

@@DaveAtLittleton Try weathering powders, Humbrol make them, very quick, very easy to apply and give a terrific look and finish. I'd spray the bodywork matt black or dark grey first. The powders do stick to the matt, but I'd recommend a matt varnish over the top to aid with handling.

@crewelocoman5b161 6 күн бұрын

P.S.: I forgot, not being funny, do look at archive colour photos first. Because it's "weathering" it's easy to think it can done without referencing the "real" thing first. Believe me, it won't look right if you don't get a feel for how it really looked!

@DaveAtLittleton 6 күн бұрын

@@crewelocoman5b161 Thanks, great tips, I will either do some thing like that or I will chicken out and bung £30 to TMC to do it for me

@davidbraun6568 6 күн бұрын

Please use a tripod shakey video is so anoying.

@DaveAtLittleton 6 күн бұрын

@@davidbraun6568 Thanks for the feedback, I do have one but opted not to use it for this video so I could easily bring the camera in close on the damage, but I will try and use it more 👍

@user-wo6qn3vf9n 6 күн бұрын

Anyone who has trouble sleeping doesn't need to take any sleeping pills just watch this video. I had fallen asleep after 2 minutes of watching it.

@DaveAtLittleton 6 күн бұрын

Haha, well glad I helped you achieve something :)

@ampersand. 4 күн бұрын

Such a gentle and soothing voice. Lovely :)

@davidclough7346 4 күн бұрын

For future videos I'd suggest you avoid repetition - 3 minutes on not overdoing oil? And 3 hours to clean it with a huge pile of cotton buds? 1 minute with electrical contact cleaner and a couple of cotton buds is all it needs - see OO Bill videos. I'm afraid I stopped watching the rest of the video.

@DaveAtLittleton 4 күн бұрын

Noted, I try to avoided repletion but in videos that are meant to be educational in a sense, repetition is also necessary as it's how people generally learn so there is a balance I have to strike. Yes, I watch OOBill, he's very good, the oil or grease on the loco body was old and had dried and worked its way in to every tight space. I can take apart and clean a loco relatively quick and easily but this one was really bad and that's what led me to making the video.