I Wish I Discovered This Router Bit Years Ago!

Рет қаралды 37,748

2 жыл бұрын

Router Cutter - amzn.to/3wOG4aB
Router Used - amzn.to/3Ll12BF
Thanks for watching, Let me know if you are ordering one of these cutters! It is certainly going to pay for itself very quickly in my workshop!
If you’d like to support the channel so we can make more videos please consider becoming one of our Patrons or sending a one off donation Via PayPal
PayPal Donation - paypal.me/OliverBradshaw
Patreon is a simple way for people to support the channel with a minimal monthly subscription.
If you'd like to support us go to our Patreon page here - / bradshawjoinery
Or you can buy me a beer here - BuyMeACoffee.com/BRADSHAWJOINERY
Help support the channel when shopping on Amazon, if you click this link below before buying anything on amazon, I will receive a small percentage of the sale price. It will not cost you any more, so please help me out if you can.
UK: amazon.co.uk/?tag=bradshawjoi...
US: amazon.com/?tag=bradshawjoi0c-21
INSTAGRAM ► / bradshawjoinery
TWITTER ► / bradshawjoinery
FACEBOOK ► / bradshawjoinery
WEBSITE ► BradshawJoinery.co.uk
qpwoeirutyghfjdkslazmxncnv91
#Joinery #Woodworking

Пікірлер: 65

@normstavin6290 3 ай бұрын

superb craftsmanship, professional integrity and descriptions of processes

@siwood1981 2 жыл бұрын

I just finished going thru this dilemma on the first 4 of 28 interior doors i'm commissioned to built. That is 40 mortises on just 4 doors! Having to go back in with a mortising chisel by hand to clean out the bottoms has been time consuming and a royal pain to say the least. From milling the lumber/timber from rough to this stage of a door component, a fair amount of labour has gone into that piece so any time savings is a win. I cannot thank you enough for taking the time to share this bit and process that you have stumbled on, especially showing us to go deeper on the ends with the mortiser for shavings clearance. Cheers mate!

@BradshawJoinery 2 жыл бұрын

Mate, its a comment like that that has made making this video worthwhile so thankyou! I knew i wasnt insane looking for a cutter to do this task, and glad ive found one! did you order one and has it worked?

@siwood1981 2 жыл бұрын

@@BradshawJoinery Just a quick ( hopefully ) question... I need a depth of cut of 74mm as my application is for interior doors, not cabinet doors. Ignoring the recommended collar marking ( hehehe ) could i get that depth in your opinion ? I can't seem to find that spec for the cutter... Cheers!

@Dazza19746 2 жыл бұрын

You’re costing me a fortune! Ordering! So hard getting the haunch spot on with hollow mortise, it’s alway a bit ‘rough’, and if it’s not deep enough and it’s not cedar!😂 it can kick a dogleg on rail/ style, this should be perfect!! Thank you 🙏

@BradshawJoinery 2 жыл бұрын

Haha, just router it after morticing and before moulding works a treat and also great cutter for jigs!

@Dazza19746 2 жыл бұрын

@@BradshawJoinery got two coming 👍🏻. The double bearing is brilliant in itself! Door hinge, double hung pulley, only limited by our imagination 😂 I’m going to keep one set up permanently for haunch, T’other jigs👍🏻 Mid to late April 🙄

@tonyworkswood 2 жыл бұрын

Good idea and it cleans the sides up as well. Tony

@BradshawJoinery 2 жыл бұрын

Cheers Tony, yeah its very good!

@yt66228 2 жыл бұрын

Beautiful work.

@BradshawJoinery 2 жыл бұрын

Thankyou Paul

@brentjenkinsdesigns 10 ай бұрын

Well done brother. I really enjoy farmhouse or rustic pieces. Looks like you were quite successful in preserving the built in natural beauty.

@markhagen7777 2 жыл бұрын

Thanks, that’s a great help!

@BradshawJoinery 2 жыл бұрын

Cheers Mark, thats good to hear!

@mauserkk98 2 жыл бұрын

The results speak for themselves, better fit for a strong glue up . Nice

@BradshawJoinery 2 жыл бұрын

Thankyou Nicholas, yes summed it up lovely there!

@MrBez007 2 жыл бұрын

The short flue pattern bits are so useful. I use them from 3/8 up to 1,1/8 diameter all the time. Wealden sell some with a 3/16 flue length and double bearing and really cheap.

@BradshawJoinery 2 жыл бұрын

Cheers MAte, yes Wealdon are a good company!

@jimbartley9125 2 жыл бұрын

Nice. Very clear explanation.

@BradshawJoinery 2 жыл бұрын

Thankyou Jim.

@jamesmills6766 2 жыл бұрын

Great idea!

@BradshawJoinery 2 жыл бұрын

Cheers James!

@idontthinkso666 Жыл бұрын

You don't miss anything. Well done!

@BradshawJoinery Жыл бұрын

Cheers Pat.

@carllamb6711 2 жыл бұрын

Perfection at its best Just love your videos my mate 👍👍👍👍

@BradshawJoinery 2 жыл бұрын

Cheers Carl! :) Really appreciate the support!

@mikehewitt6484 Жыл бұрын

Thanks for your tip with this router bit Oliver 👍🏻 You’re keeping Trend in business. Another one ordered 😉😂

@BradshawJoinery Жыл бұрын

Haha! They are just great things. Pretty much live in my router and used all the time so its hard not to reccomend them

@braddalzell2942 2 жыл бұрын

I know exactly what you mean, what we were learnt was to cut your haunch a little bit too big but cut it back at an angle and squash the slightly pointed part into the mortice, keep up your good work, love watching your videos 👍👍

@BradshawJoinery 2 жыл бұрын

Cheers Brad, yeah thats the old way, only issue is cutting the door down later on can expose a gap, and any timber compressed acts as a wedge on the joint, so hopefully this is double good. Its made my life a lot easier!

@braddalzell2942 2 жыл бұрын

@@BradshawJoinery absolutely mate couldn't agree more, 👍

@raydriver7300 2 жыл бұрын

Good morning and thanks for your response. I’m near Market Harborough. If it’s convenient and I’m not being too presumptuous, I’d love to be able to pop in to see you sometime 🌞

@BradshawJoinery 2 жыл бұрын

HI Ray, Drop me a message on Instagram or facebook!

@paultay23 2 жыл бұрын

Nice one Ollie... I have a few Trend router bits so one more won't hurt...ha ha. Cheers Paul

@BradshawJoinery 2 жыл бұрын

Haha cheers Paul, Yeah its bloomin brilliant little bit!

@DovetailTimberworks 2 жыл бұрын

Pretty slick, I could see getting set up with a methodical system and that not really adding much time to the whole exercise. Could even do it in a router table perhaps? Set a stop so you know you've gone far enough? Good vid!

@BradshawJoinery 2 жыл бұрын

Cheers mate, it will deffo help me earn a few £ haha! Handheld router is best for the stop start nature and quick easy positioning. Easier to move a small router acurately than a long door stile. Its just a dead simple operation for a task that is normally a chore!

@grotekleum 2 жыл бұрын

Lovely joint (no not that sort); thanks for sharing, always learn something new and / or useful on this channel..

@BradshawJoinery 2 жыл бұрын

Haha! "The perfect joint" title might attract the wrong crowd haha

@grotekleum 2 жыл бұрын

@@BradshawJoinery Ha, you are not wrong! :)

@sjwalker01 8 ай бұрын

You lost me early on but such a great project. Roll on the cutting and jointing when it will start to take shape.

@raydriver7300 2 жыл бұрын

You are a very clever man. And I’ve looked - You are about 20 miles from me 🌞

@BradshawJoinery 2 жыл бұрын

Cheers Ray, where are you?

@johnpeplow3985 2 жыл бұрын

I enjoyed it and dodge the sawdust.

@BradshawJoinery 2 жыл бұрын

Cheers John, Yes always a concern!

@DavidSpilsbury-wx1gj 3 ай бұрын

Hello mate great channel and i've been watching your channel for a couple of years. I'm a carpenter / joiner and have a workshop and have all the usual machinery that a joiner needs. Ok so my question is do you cover your machinery beds and blades with anything ?? The reason i ask that my table saw bed and planner bed go quite rusty when its moisture levels get a bit high due to rain, and i will admit to running a bit of green oak through the machines from time to time. I sand the beds down with sandpaper to get the rust off and wax them up routinely, but i still the rust coming through. Any ideas and advice would be a great help

@BradshawJoinery 3 ай бұрын

the basics of it are temperature change, the solid metal mass, will hold temperature and change slowly but the enviroment around it changes quick. Slow the envionment change around the machines down and it wont condensate... basically insulate the room and try to prevent moisture inside is your goal. If you cant i know some folk will oil the beds each night then remove before use. I had good results from the liberon machine wax in my old shop, but its impossible to prevent it some days, the machines would be covered in condensation.

@samrix5793 2 жыл бұрын

Very nice, what wood is that? Thanks

@BradshawJoinery 2 жыл бұрын

Thanks Sam, Its Poplar or Tulipwood.

@doug.ritson 2 жыл бұрын

You should add a US Amazon affiliate link for a like/kind bit in the world standard of inches for purchasers over the pond

@BradshawJoinery 2 жыл бұрын

I used to have Affiliate us but not sure i do anymore. 80% of my views are UK If i get more Us ill look into it thanks! :)

@michaellinahan7740 11 ай бұрын

don't you find that the glue has nowhere to go with such a tight fitting joint? Not that I ever have a lot of these to do I think I would make the first 10mm or so the correct depth and then the rest a mm or two deeper , the shoulder of the tenon will still seat properly, the visible joint would look perfect and the glue will still have somewhere to go. It is a neat method none-the-less.

@SPMech1 Жыл бұрын

👍👍👍👍👍👍👍👍👍👍👍👍👍👍

@BradshawJoinery Жыл бұрын

Thankyou Bob

@richardmckrell4899 2 жыл бұрын

Free or did you pay for them?

@BradshawJoinery 2 жыл бұрын

Hi Richard, Trend have offered to support the channel by providing any of their tools I would normally use or reccomend to me. Don't worry I won't be tarring my own reputation to promote somethin I wouldn't otherwise 👍 I've been looking to have a cutter like this made (all be it in 8mm diameter) for a long time and haven't been successful in finding a company to do it, so when I happened to stumble across this and it works, I'm sure there must be others who will benefit from it. In fact if it wasn't for trend coming to me with the offer I probably wouldn't have found it so it's win win for all I think. 👍

@BlueBloodCstm 2 жыл бұрын

Who cares? Watch the video or don’t.

@richardmckrell4899 2 жыл бұрын

@@BlueBloodCstm Obviously you care

@richardmckrell4899 2 жыл бұрын

@@BradshawJoinery I just like to know if I'm watching an advertisement video or not. No reflection on you or your channel. Thanks for the response.

@BradshawJoinery 2 жыл бұрын

I agree Richard, I hadn't initially clicked the paid advertisment button but did straight away. I also think I mentioned trend supporting the channel and that's why I had the cutter but I'll try to make it clearer 👍

@peterfitzpatrick7032 2 жыл бұрын

I'm not a big fan of having that much tool hangout from the collet.... As a machinist by trade, its a recipe for disaster when machining steel... Obviously woods softer , but at the rpms the router is running , you can get vibration on the cutter which can encourage tool movement in the collet... Be careful, mate ! 🤔

@BradshawJoinery Жыл бұрын

Thanks Peter, I will keep the tool hangout to as minimum as possible and heed your advice! Thankyou

@juyhfrty 2 жыл бұрын

Dont you now have to state a ‘paid advert’ on YT if you promote an item that is given free by the company? I know you wouldn’t recommend something if it wasn’t good just because its free but in the interests of clarity and fairness to viewers its better to be open and say so imo.

@BradshawJoinery 2 жыл бұрын

It is stated i think but i will make it very obvious next time. It comes up includes paid promotion, and i also mention that trend have sent me the cutter in the early stages but i will add text just for clarity in future.