I2C P14 PRO PROGRAMMER NOT WORKING!!! HOW TO RESOLVE ISSUES!!! UPDATE VIDEO!! 2024

Рет қаралды 429

SURGE⚡️

5 ай бұрын

HOW TO RESOLVE ISSUES WITH YOUR P14 PRO NAND PROGRAMMER! IPHONE/IPAD NAND PROGRAMMER PROBLEMS!!!

Пікірлер: 12

@mm0077 5 ай бұрын

Thank you for sharing and this is informative and will be helpful.

@SURGE101 5 ай бұрын

Hopefully it helps someone and thanks so much for taking the time to watch. Really do appreciate it. Thanks Rich

@jessiezapanta6437 3 ай бұрын

tnx sir for uploading can u try bga70 the chip detected but can't read the data i've always have this error even i have a good nand chip test ">>> Reading information... >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Incomplete hard disk partition!!!! >>> The operation is complete !!!"

@dancualexandru6223 2 ай бұрын

Hi, can you please help me with a problem regarding p14 pro. I've tried to unbind wifi on a iphone 12 nand but it doesnt work. The programmer says that wifi was unbound but in the phone wifi is greyed out, only bluetooth works. With the original wifi ic the phone has wifi. Thank you.

@SURGE101 2 ай бұрын

Check if you have imei , could be the sandwich layer, when you soldered the boards back together when you changed the Wi-Fi ic. May not be an unbinding issue. Thanks rich

@dancualexandru6223 2 ай бұрын

@@SURGE101 everything works fine...if a put back the old wifi ic it works but with a new one it doesnt. I've tried several time the unbinding proces but same result. I dont know why it says wifi is unbound but in reality it isnt.

@cuneytbekler6612 2 ай бұрын

Hi There, I have a problem to connect my P14Pro nand programmer with newest I2C SodtwareVV1.4.94 and NanD Software P15Pro Ver 2.16. The Nand Programmer cant connect and in the middle Windows stays " Model Error" i try the made it like in the Video but this versions what you have isnt avaible as download nowhere.. maybe you have the old Versions of this software and you can place a Link here on below from Video.. or maybe you can help me with actuall version how i can fix this problem. thanks a lot

@Bvetube101 Ай бұрын

Hey bud having exactly the same issue as yourself, I2C Soft version VV1.4.96 along with NAND soft version 2.16, downgraded the firmware of the programmer to v1.00 and still getting "model error >>>>" message. Not sure what else to try at this moment :(

@fabiorosario2896 5 ай бұрын

Hi thak you for the video, can you please share the file for the firmware dowgrade or share a link where I can fint it

@SURGE101 5 ай бұрын

Once you upgraded to the v2.10 p15 pro software , just click the device upgrade button on the top. It bring up the box and from there are the firmware files you require for the downgrade. Thanks rich and thanks for taking the time to watch.

@onefix-hb4sf 4 ай бұрын

how can i do the downgrade ???

@SURGE101 4 ай бұрын

Once you upgraded to the v2.10 p15 pro software , just click the device upgrade button on the top with your p14 pro connected and It bring up the box and from there are the firmware files you require for the downgrade. Thanks rich and thanks for taking the time to watch.