DEAR SIR, KINDLY LET ME KNOW, HOW I CONNECT TO OTHER LINKS TO MAKE COPY OF OTHER VECHILES SOFTWARE. REGARDS, DR. SAMAN

@@HUSSAINSAMAN The link is in the information right below the video under the OPs name.

Thanks for the kind words

Good advice

Thank you, this was one of my earlier videos, I have many more that I think I do a better job explaining !, here is one on my Range Rover. kzfaq.info/get/bejne/f-CcmKx7q8fGdYk.html

Thanks so much

Fantastic, so useful isn't it! You will find there are some menus on different cars that are really in-depth, try viewing data options

@@GrooveOn yeah a great tool all round. Although I’ve just tried to update it for more cars but it’s the LR V2.0 and won’t update to add more brands. Just seems to be Land Rover n Jaguar??

@@GrooveOn do you know if it’s possible to get more cars on the LR v2.0? If so any help would be appreciated.

Don't see the ford option on the download list? Where did you download it from please?

Hey thanks, I have just filmed another vid you will like I am uploading today on my SL, so if you subscribe up it should show up for you.

My pleasure 😊. thanks for the kind words !

thanks for the great feedback, I may do another video !

Welcome

no problems, let me know if you need further info

@@GrooveOn doesnt thr 1+4 version givd you a total of 5 different makes. Howcome you have all makes speciality diagnostic software loaded?

Thanks for the kind words. No I don't believe it can do mileage correction.

When you go to the ICARSOFT site and select software and updates, they typically tell you how to upload new software and firmware updates.

If I was buying again, I would perhaps go for the model that does all cars. Otherwise you can buy the version that allows you to add 10 cars P.s. I've just created another icarsoft lesson video on a Range Rover, you can see how many codes I managed to clear! kzfaq.info/get/bejne/ndSkZK59ut3Smp8.html

That's a good question, I don't know for certain, but would suspect it will just show the codes

Glad I could help!

Ready to use from opening the box. If you have a look on my store page there are links there

Appreciate the comment mate, let me know if you want any further advise, good luck!

Hi there, yes, you select the diagnostic menu and find TCU, then check codes and clear, good luck

@@GrooveOn thank you, really appreciate. Is the unit I need to buy the iCarsoft MB 2.0 version, for my W211 E350 2005? Need to access SBC and TCM faults.

Are you tyre sizes the same for front and back, as this can cause an issue

Also the cruise is linked to your abs and traction i think, so if one item is at fault it will cause the others to go into fault. The icarsoft should tell you if an abs sensor is faulty. Good luck.!

@@GrooveOn yes all the same size and make, and all brand new.

I do not have an Autel however the reviews are very good. With that said the price tag is about 5 times higher, so I guess it comes down to your frequency of use, if you only have 1 or 2 cars and just want the occasional diagnostic then use the icarsoft, if you change cars more often then spend a bit It more and go for the Autel, which is what I intend to do!

unfortunately not

Hi there and thanks! The differences between version 2 to version 3 is the level of functionality such as airbag crash data reset and many other items. The difference between the two versions in terms of price is minimal I would definitely get the version 3

@@GrooveOn so I can go for the v3 for my mb workshop use

Hi there, I have done another video showing the software, and adding cars. See if that helps

hi there it depends on the type of iCarsoft model, some allow you to add more cars, have you look ad this video I did that explain how to check. kzfaq.info/get/bejne/jtp1ipqU05q4kok.html

Unfortunately not, as you correctly said you need STAR

Yes, I believe you can

I'll check for you, but I don't believe so

I will do another video on this.

yes that would be good i tried but can't see how

did you ever make this video?@@GrooveOn

@@cnatspell1 the video I did is here, its about 4 mins in.kzfaq.info/get/bejne/jtp1ipqU05q4kok.html

not all icarsofts allow multiple downloads, you may have the single version mate.

If you bought with only one make, then you could try and see, usually you need to choose the multi car version through.

Hi there did you get the version that you can choose 10 different models? If so then you will be able to choose Chrysler mate

Free updates for life too on icarsoft

Hi, yes you plug in the scanner with the card inserted in the scanner to update.

@@GrooveOn Thank you!

Hi There, for that one I am not certain, try contacting icarsoft directly mate.

@@GrooveOn Cheers for the reply. :)) You are one of few KZfaqrs that regualry reply to questions - that is what puts you ahead of the rest!

There is a lot of live data that can be seen, if only I had a W205 I would check for you, sorry.

Ok no worries I’ve just purchased v3.0@@GrooveOn

Hi there, 48SPOKES, thanks for the kind words! In regards to enabling items such as the door lights, I don't recall there being an option on the car dash menu to turn off / on and like wise the iCarsoft I do not believe has an option. You can check a lot of details on the icarsoft such as the keyless go features and ABS , Steering, emissions etc etc, However if you want to get more of a two way set up perhaps look for the icarsoft CR Max. I am thinking of getting an Autel Maxicom 808 that can program keys ! As for the channel growth, it takes time and effort, but if you like what you do then go for it. I found that I had posted 9+ years ago just to help explain things on car forums and over time those videos without me knowing gained a lot of views, then about 2 years I got more serious and started to look to getting the 1000 subscribers and make a channel with the goal to help people and save them money! I have not got intsagram but think I need to branch out. I'll have a look at your channel, try a few different video subjects then focus on what is most popular! This info is provided in detail with KZfaq Studio and the analytics that you get to evaluate. Good Luck !

@@GrooveOn Thank you for a great reply 👍 I have just bought an iCarsoft CR PRO Plus which has all the functionality of the CR Max but without the touch screen. Like you said it can't configure MB coded car functions but at least I can maintain the car better with the code reader. I have been running my channel for about 2 years now and while I enjoy what I do (including the video editing) I am a little disappointed in the rate of growth of the channel. It is very bespoke to a small portion of the population so, to coin a phrase "it is what it is" 🤷‍♂️ Having said that, I have one video that is outstanding in its performance and that was totally unexpected. So, like you suggested I maybe should try more like that. The trouble is that the core channel content is different from the high performance video. Ha haa, such is the way of things. Kind regards Paul

hi 48SPOKES I've just watched your video on Rotoflex hub, great stuff, you sound just like the actor Sean Bean! genuine, honest delivery which I think works well. I thought I would give some feedback if thats okay, I am no expert, but I have discovered from the analytics that I get through KZfaq studio what helps me and what does not. This information is on how people skip through the video, the demographic, what points on the video people watched the most amongst much more. Firstly you have a good niche with classic cars, which you will find your audience will be of a certain age and from certain countries, mainly UK / USA I would think. I like the use of music and speeded up video and the 'music bed' on the 'dull' bits as it keeps peoples interest and you have good camera set up angle too, remember to avoid looking at yourself in the screen, always look right down the 'barrel of the lens' not the screen as your people will notice your eye's. Your popular video's are around powder coating, welding, remember that even though you and I know about whats involved, many people do not and definitely do not have the equipment at home, so you could look at doing some advice videos as this subject as they had a lot of views on your channel! Heres what I would change: Try and avoid needing to explain what your video is about, remember that people will know from being able to search and find the video in the first place, as well as your description. Try and go straight in with whats known as 'teaser' shots to entice your audience, short 1-2 sec cuts telling the story but not in full!. This is a Range Rover video I did: kzfaq.info/get/bejne/ps9-nN2Yp8y6l6s.html Keep the intro graphic really short as this can put people off, its all about retaining the audience to watch you video by keeping things moving. Move your camera to different positions, then edit together to give impression of multiple cameras, try adding some 'B-Roll' over the top of talking. Use slow dynamic zoom to move slowly closer to the subject matter for good effect etc. Keep going it takes effort, and try and get people to add comments so you can get a conversation going. Keep it up you'll get there.!

@@GrooveOn Thank you that is great feedback. I am shooting the video on my phone camera which is why I am not looking down the lens. I did buy a DSLR for filming but have got out of the habit due to the dirt and dust in the workshop. Maybe I should try using my action camera. I will try and take on your very well made points. Thank you .

@@itsalldoable Keep it simple at this stage, I use a gopro which is good for action stuff and distance, not so good up close. I also still use my phone as its great for detail !. I know what you mean about seeing yourself in the screen, try and ignore the screen and look at the little camera lens instead

This video should help you. kzfaq.info/get/bejne/jtp1ipqU05q4kok.html

Hi there If your icarsoft is version allows then you can update the other brands when you use the pc as per my video, by selecting what brands you would like. However if you have bought an icarsoft that is for one car brand, then it's not possible. Hope this explains.

Hi there, here is my install video. kzfaq.info/get/bejne/jtp1ipqU05q4kok.html

Hi there, this is a video that I have been wanting to do for ages, I will have to buy a new one to show you the set up, if you subscribe, you'll be the first to know when I do it, !

The mb V2 is for Mercedes Benz. You'll need the BMW version of icarsoft and it will do the same. Or get the version that allows up to 10 cars!

Hi Mate, its a good questions I don't believe it does, it will tell you the live data, but I do not have ABC suspension unfortunately to test. I would look at the icarsft pro perhaps.

That's what I am trying to figure out too ! Bought it for a Land Rover but now I need to use it on a VW

@@johnewallace ok let me know how you go. I bought icarsoft cr pro and it doesn't seem to support suzuki which i bought it for. It such a headache trying to work these things out.

Hi, no once you've added the cars unfortunately you cannot change them, just update the version of software

I do have the same tool. You cannot change them once you downloaded them. Their server remembers which car type has been installed under your serial number. So with this device you have to pay attention, and only download what you really need. I do have 3 different cars in the family, so i downloaded only those 3, i have 7 left in case i buy a car in the future from again different manufacturer. If you would be able to change the cars any time, than basically you would own the CR Pro version with unlimited cars, but iCarsoft doesn't want that of course, since CR Pro is more expensive.

I bought the CR Pro & got lucky reading somewhere online prior to receiving it that when you do your initial setup connected to a PC & software/firmware updates, you have only that ONE opportunity to decide all the vehicle brands you want to add to the device. As a result, I downloaded every brand that was available, since the memory requirements (even with 3 languages selected for ALL), did not cause any capacity issues. I hope iCarSoft updates this capability (they should put a big warning sticker on the display, so users are aware, imho), because it would be very disappointing to learn after downloading only 1,2, or 3 brands to the device, that you were locked out from adding any more. Booo.

Hi there, good question, I do not have the ABC suspension on my car to test, otherwise i would check for you. I know that many of the functions have live data and there are service functions too. Sorry I could not help further

If you bought just the JLR then I would think not, but you could try and download software on pc, (see my video) and test if it upgrades?

@@GrooveOn do you have the link to the video please thankyou verry much

Absolutely , I changed the page once and forgot to disengaged SBC, I had to get my car ECU software updated

No, this is not possible

Historic faults are not always permanent, clear and see if they return.

@@GrooveOn yes , they return after 10 kms, and I'm on safe mode

@@greencard93 so if they return you have a hardware issue and will need to replace parts

the icarsoft will light up and beep once connected, you turn the ignition to the on position but do not need to start car.

Hi There, I am afraid that I do not know the software coding for Toyota. have you tried using the car forums?

Yes, as with any car, as long as the fault is fixed, then you can clear the code.

Hi there, if you cannot download further models, I'm afraid the version you have is only for the French cars you have and not multicar. I think icarsoft should advertise better so we know before we buy.

@@GrooveOn thank you - i thought so but after seeing this video, i wasnt quite sure :)

Hi there, if you have the CRV2.0 you should be able to download up to 10 makes, however it depends on what you bought. Download the tool as my video shows. You'll then be given a list of vehicle manufacturers that you can add to the device. Please note, once selected and downloaded, the software package will be assigned to the tool and cannot be changed. There is no time limit to making your selections, you can do this one by one or all 10 at once - the choice is yours.

Ok thanks, mine is specifically for Mercede MB V.2

Hi there, if you go into the service menu, then there is an injector option there yes. I will probably do a quick video soon.

Hi there, have a look at my other video for the software updates. kzfaq.info/get/bejne/jtp1ipqU05q4kok.html If you go to 2mins 45secs, I talk about the serial number that may help you.

@@GrooveOn Problem solved thanks for the pointer.

Unfortunately, once you've installed you cannot change them I don't think. I tried to do this myself. Have you tried calling icarsoft?

@@GrooveOn Would that mean whipping the memory

I do have the same tool. You cannot change them once you downloaded them. Their server remembers which car type has been installed under your serial number. So with this device you have to pay attention, and only download what you really need. I do have 3 different cars in the family, so i downloaded only those 3, i have 7 left in case i buy a car in the future from again different manufacturer. If you would be able to change the cars any time, than basically you would own the CR Pro version with unlimited cars, but iCarsoft doesn't want that of course, since CR Pro is more expensive.

Depends on whether you got t the multi car version however follow my instructions and give it a go, if it doesn't then it's just locked on to the mercedes i'm afraid.

What's resist sorry?

@@GrooveOn Hi want to resist my dpf light come up on my Audi q7 because i drive 15 mins to work have day so have month i have to pay to get it reset and i have the icarsoft vaws v2.0 wen i get to particles filter initialization that is the one that keeps failed all of the next 4 complete

@@breodwight oh, you want to perform a dpf regen is it? If the option is there for your Audi then it should be able to do this. However not all models are possible. In regards to needing to sign up to icarsoft this is not required

@@GrooveOn How do i do that please can you help me out sen me a link please

@@breodwight if your car is compatible, the dpf is on the main screen, before you go into the diagnosis

Hi. The full smart scan actually doesn't provide a list of individual faults, but just searches for systems that the icarsoft can access. You need to go into each one to test for faults my friend. If you just run the obd scan from main page, this will give list of any faults

@@GrooveOn ahhh right, never thought.ht of just running the odb scan instead, will try that tomorrow, thanks

Always,!😎

I think if you are lucky enough to have a new Porsche, it would be advisable to pay for the dedicated Porsche diagnostic mate. I find icarsoft is a good general level device.

How can I help you my friend?

Wow, I am surprised when I use my icarsoft on my range rover l320 and l332 sport I have a tonne of features! Are you sure you have a genuine unit? Here's a video on my Range Rover ..kzfaq.info/get/bejne/ndSkZK59ut3Smp8.html

@alastairmurry Yours sounds like it needs an update? Or you bought it from eBay? Poss fake? Mine is brilliant 👌

I bought the LR V3 for my 2007 Jag but it hardly works. I'm going to give them another week then it's going back if they don't fix it.

@@gepwxaqdfsidsesg1548 I've already sent mine back. Lol. I got a snap on ethos edge on craigslist for 450, way happier.

Software version 31.00 has arrived and it's a lot better. On my 2.7 XJ it now connects to 16 different modules and I no longer get lots of dash warnings when I use it

I can confirm that it can read a lot of modules on Jaguars, i have seen this device reading a Jaguar, read the modules and also did throttle body alignment. Don't blame them, not their fault if you are too dumb to use it...

Hi there, I take it you have a fault on your dashboard for the EPS. Firstly do you know why this appeared, i.e. did you jumpstart the car, or have you disconnected the battery? The fault should auto reset after a few starts. I have not personally used the icarsoft on your BMW for this fault so cannot say for sure if it will clear but would think that as the icarsoft can calculate the SAS steering angle sensor there is a good chance it will help you. Sorry I cannot be more definite, as you can imagine there a thousands of faults with cars that can happen. I would recommend contacting icarsoft.com and perhaps ask direct ? Good luck!

This video was the first video I did on diagnostics many years ago, since then I have improved and there is a playlist on different cars with different devices here: kzfaq.info/sun/PLIcL6boQ-d8j_lKoGdY0HHWWQjfGlrFJr