Thanks for watching Mike! Glad i could help.

Hey, thanks for watching! The brake/table combo has been super handy in saving space. I don't know how I'd fit it in my little shop if it weren't combined. It's definitely in need of a cover to keep it clean though.

Thank you for the kind words! It would have been a lot faster to MIG the table together, but I'd like to weld more stainless in the future so I bought a TIG/stick machine. Even stick welding would have been faster, but it makes too much smoke for my little shop.

I appreciate that! Your post more than doubled this newbies views overnight! Thank you.

Thank you Timothy! I greatly appreciate it!

Thank you! I really appreciate that. I've got lots more projects on the way - slowly but surely!

@@PunkerBuilds you're very welcome my dude! I'm in the process of building out my met workshop in my garage. planning to make some videos and stream some stuff too down the road. Currently im deciding on how i want to make my welding table.

@@shibbling Best of luck to you in pursuing your garage shop! I hope my build gives you some ideas!

Thank you! I'm glad you found it helpful Vincent.

Thank you! It's really useful!

Thank you!

Thank you Brenton!

Thanks man!

Thank you, Antonio!

Thank you Paul! I appreciate it. It was definitely a fun one!

Thank you!

Thank you Bradley!

Thank you Patrick!

Thank you! I appreciate the subscription! More videos to come.

Thank you! I'm glad you enjoyed it! Sadly it didn't come out flat. I think it's a combination of... 1. I welded the vertical fillets at the intersections of the slats and they shrunk a lot, bending the table and making it convex, and 2. I used twice as many stitches as I probably needed. I still use it all the time but eventually, I'll get the top laser cut with the fixture holes and try again. When I have the extra money that is lol.

@PunkerBuilds woodworking types are using a Parf guide for their dog hole bench tops. If you used the jig and maybe an annular cutter, you could skip the whole laser step.

Thank you! I appreciate it. It's exactly what I needed, thats for sure!

Thank you!

Thanks man! I appreciate that. Thanks for watching!

Thank you Michael!

Thanks for watching Carl!

Thank you Justin!

Thanks! It's held up well lol.

Ha! Thank you, I learned from a lot of other scruffy characters!

Ohhh man, I know what you mean. No way I would be building that table now. Everytime I have to buy material it just instantly blows my budget lol.

@@PunkerBuilds right. I'm wanting to build a couple cars and trailers. I can't afford the material to get my stuff setup in my shop let alone do cars or trailers. Everything I see a bed frame in the trash I pick it up lol

You gotta do what you gotta do! Good on ya for being resourceful. I've only been buying the leftover off-cuts from my suppliers and pickings are slim.

Thank you Hellboy! Welding the whole thing in TIG definitely took... probably... 3 times longer lol. I dream of the day that I'll have enough space for multiple machines!

@@PunkerBuilds i bit the price bullet and bought a multimatic 220 prefect machine in my eyes

Nice! I took the risk and got an Everlast 255EXT. It runs perfectly and was significantly cheaper than Miller so I've been very happy with it.

You're very welcome.

Thank you!

Thanks for watching! TIG deffinitely didn't make it a very fast build, that's for sure lol.

Thank you!

Thank you Chad!

Thanks! I was taught it as a jeweler and it's been extremely handy to know!

Thank you!

Glad I could help!

Haha, thank you! No I didn't, it's really dry where I live so the only spots that have lightly rusted were spots I spilled water on it lol.

Thank you Alexander!

Thanks Christopher! Yup, I did it all! From CAD I made myself 12 pages of shop drawings to build from. I also did the video editing and animated the rat at the end!

Hi! Thank you, I'm glad you liked it! This is the sheet metal brake i bought. The same exact machine/model is sold under other names so it's somewhat common. www.kmstools.com/magnum-48-quot-box-pan-metal-brake.html

Thanks! Got a new camera since then.

Thanks! It was actually 1/8" but if I did it again I would use 3/16" or 1/4" and ditch the reinforcing pads.

Hi Sergey! Thank you for watching! Since I had the 3d model in CAD (Rhino is the program i use) I intersected/cut the shapes in CAD, then unrolled/flattened the outside surface to get that profile shape. I then printed it out 1:1 scale.

Lol, cheers! There's 14 pages of technical drawings on my patreon if you like the design.

@@PunkerBuilds - Nice... I see what you did there. But, having made heaps of ad-hoc, roll-with-punches type projects that always end up as rustic agrarian art work, these plans would actually really help. (THIS READS LIKE A BOT AD). Let's go Brandon: that should fix it.

I went with 1/4", thanks for watching!

Hey Hayden, I used 2" x 2" x 3/16" HSS for the frame and most of the flat bar was 2" x 1/4" except the very front and two sides have 1" x 1/4" FB. If you're interested, I have a 14 page package of drawings with a cut list on my patreon.

The program is called Rhinoceros 3D, version 5.

Thank you Chris! I definitely plan on going more indepth in the future, I'm still getting used to making videos!

Thank you Elioner, and welcome to the awesome world of welding! It is an excellent skill to have. I do indeed have a 14 page drawing package available on my patreon which comes with a full cut list and notes on how to approach welding the table. www.patreon.com/punkerbuilds

That is Rhinoceros 3D. Thanks!

Thank you Tom!

That would be mild steel. Which is 44w or A36 steel. I'm pretty sure mine is A36. I would'nt go any thinner than 1/4".

Not yet Tim. I changed jobs and the new shop doesn't have a mag drill to borrow lol.

Thank you Brady! I will deffinitely be making the plans available over on my patreon! I just haven't gotten around to the couple revisions i wanted to make. I will definitely be releasing the 12 pages of plans though!

@@PunkerBuilds I’ll be waiting for them. I’ll check out your Patreon.

Thanks!

Rhinoceros 3D

Thank you! I'm glad you enjoyed it. The CAD program is called Rhinoceros 3D.

@@PunkerBuilds Thank you for your reply. Did you make the cutting patterns with this software? because it's really interesting

Yup! I try to get all the problems sorted out in CAD before I begin to build anything. The software can make technical/dimensional drawings to work from but its all pretty manual and tedious. For those cope patterns, I was able to 'unroll' the outside surface so it was flat, then printed in 1:1 scale to wrap around the tube. It saves me tons of time. Rhino can make models for 3d printing and files for cnc cutting. It's not cheap but i like it because its a one-time purchase with no monthly subscriptions. I took a class to learn it. The prints to build this table are on my patreon.

@@PunkerBuilds Thank you very much for the clarification. personally I have solidworks, very complete but not necessarily easy to do this type of realization and I have not yet found to unroll the cuts and make patterns.

Ah yes! Solidworks is deffinitely a more powerfull program and superior for engineering mechanical parts. I've found Rhino to be a more intuitive design process and its excellent for surface development. They have a 90 day free trial that's definitely worth a look!

Hey, thanks for watching! - It's a lot easier to build a table when you've already got one to work on. Your first welding table doesn't have to be your last. Cheers.

That would be a Makita LC1230, 12" saw. It's been an absolute champ.

There's nothing wrong with wire feed! A good weld is a good weld with any process. I only own a TIG/stick machine and didn't want to deal with all the smoke/soot from stick. TIG was really slow though.

Thanks Erik! Excluding the time i spent screwing around with the camera, it took around 80 hours. It was built over evenings/weekends over 6 months though. TIG welding sure didn't make it faster lol.

I assumed it took a while! Nice work. I have no software experience and am a noob at welding but I admire your effort into showing/editing the design/prep/layout, as well as the build. There’re lot of guys & gals doing incredible work out there, off the cuff so-to-speak, but your actual build shows how much time you probably saved not d’ing around with designing on the fly. Nothing more then constructive criticism to say you’d probably find a niche market explaining the design software/prep significance, since your fab is clearly professional. You may help those who actually want to be more then hobbyists by demonstrating how much time is saved ($$$ made) by investing in the prep? Just a stranger’s 2cents! Nice job on the entire video/build. I hope the table serves you well! E-

I appreciate that! I would definitely like to get into the more DIY/explanation type videos in the future - Especially on the design methodology side of things. My background is as a jewellery designer and I've been a full-time fabricator for years now. So PunkerBuilds combines my design background with industrial fabrication experience. As for the software/welding experience, it's all about patience and persistence. When I actually get around to building things, it's usually the 3rd, 4th or 5th iteration of a design. Whether its welding or a new program, it comes down to picking up little tricks, bit by bit, untill you have an arsenal to work with. Thanks for watching! More cool stuff to come! Cheers.

Thanks Timmy! I initially learned Rhino 3D about 10 years ago by taking a class in college. I learned it because it's a common CAD program for jewelers and that's what i went to school for. I carried it over after I became a welder and it has served me well since. It probably took 3 or 4 months to be comfortable in but I'm still learning new tricks. I would reccomended trying fusion 360 or google sketchup - both are either free or have free versions. I haven't used them much/at all but i know people talk highly of them for getting started.

@@PunkerBuilds Thanks for your reply ill be sure to check them out. Learning how to use these programs will take my business to the next level. Are you aware of any programs where you can take a photo, then do some technical drawings on? Like taking a picture of a space then drawing a rudimentary staircase on for your measurements, then going into Cad to design the staircase.

I think the short answer is yes lol. In Rhino, the program i use, its just a command called "picture" and it imports any picture that i can set in the virtual space, manipulate, change the transparency and draw on top of it. The trick is making sure the picture is taken relatively square to thing you're trying to reference. I use it all the time to transfer my pencil sketches into the program, then draw the curves on top. It will be different for each program but i believe it is fairly common.

@@PunkerBuilds Sweet man, I hope fusion 360 has a feature like that, I've been checking it out since you suggested it. A cool feature with fusion is you can up load designs on to a cnc plasma. So handy for repetitive cleats and base plates. Iam sure you could do that with Rino too. Fusion looks like it has some great features for a metal shop. Thanks for suggesting it!

You're welcome, have fun! It definitely takes time and patience to learn but it's sooo handy.

It really was.

I would absolutely consider it! For now, there's a 14 page package of build plans on my patreon. It includes a full cut list.

@@PunkerBuilds I have a giant certiflat 5x10 table but just figured it could be a great business opportunity for oyu with such a great skillset in cad. Keep up the great work!

Thank you Robert!

Great build! Did you end up drilling holes where the circles are on the top?

Yeah steel prices have gotten a little ridiculous. In steel alone it was a little under $700 Canadian dollars at the time. All in with hardware, casters, brake and vise, it was a little over $2,000. Not including filler metal or abrasives. I have a 14 page package of shop drawings on my patreon that has a full break down.

@@PunkerBuilds Great build!! I havent used patreon before so do i pay the $3 subscription for the plans or is that just for the videos. I really want to buy these plans.

@@deepstatearmory Hello Jess! I'm sorry I didn't see this comment in time. I saw that you did end up subscribing on Patreon and I super appreciate it! I hope you were able to get the plans and that they're what you're looking for.

I do intend to post them on my patreon, yes, but I haven't had the chance to revise them yet.

👋👋

Hi! I have build plans available over on my patreon: www.patreon.com/posts/56084453 This build cost me about $2,200 in material and hardware (including the brake) but prices have gone up since Covid.

Ha, It's definitely on my long list of needed tools!

Not really, it's dry where I live. I'll get it sand blasted and painted some day but its been a year and it's fine.

Yeah! It's insane. I'm glad I built it when I did because it practically doubled.

Sure, It would have been easy to get these parts cut, but It's also not hard to just zip disc down a plate and blast out some brackets. I'd rather do it myself than pay someone else to.

I might turn down the volume but I tend to WATCH KZfaq for the videos. Thanks for the time and effort put into your content.

Thank you! It was a fun one.