I like your delivery. I like that you only talk about what is important.

My quick confirmation that the correct breaker has been shut off is to sniff it again with the receiver after turning it off - if the tone at the panel is gone, you’ve got it. Once you shut off the power to the transmitter, it stops chirping.

Good demonstration! The “open ground” is because your alligator clips were only connected to hot and neutral. If the plug adapter had 3 clips it would most likely show “wired correctly” but since the tracer is following the hot back to the breaker you don’t need an alligator clip on the ground 👍🏽⚡️

Wow, this is exactly what I needed! Your video was clear and direct and will be a huge time saver, thank you!

The light attachment would be helpful for those ceiling lights when you don't know what breaker they are on.. Good Video

Oooh, I bought one of those things years ago but my eyes glazed over trying to figure out the instructions. Now I've bought a treadmill and I've got two air conditioners running so I need to make sure they are all on separate circuits. Thanks for taking the time to make this video.

One of the first things i bought when i got my house three years ago, helped a ton!

Thank you for the video, Straight to the point and useful.

Love the videos man. Your videos have helped me quite a bit in my budding maintenance career. Appreciate ya bud.

This is very well done! Easy and informative.thanks

you look like Tommy Lee Jones... great video!

You came a long way congratulations to your new home 🏡 keep the videos coming also I honestly enjoy your teaching

Thank you for the video. Now I know how this thing works.

I got an upgraded panel, and some singles were traded for minis that share a neutral. So they are tied together. I drives my tester nuts.

Thanks, Dave excellent info.

Hope you find those 2 mystery breakers! Good video. I got that same tool. Works great! None of our circuit breakers at my job are labeled...

I noticed for your lightbulb demo you held it up or horizontal. That’s because it unplugs itself with its own weight when held upside down like you would use it in practically every lightbulb source... My solution to this was bend the connectors inwards but that still barely helps. Was curious if you were gonna mention this or not

Great tool but for others who don't know obviously if there in no power going to the outlet it can't be traced.

Is it possible to go through this rationale with a mega-ohmmeter and a transmitter (but no receiver)? Clearly I would need a second set of eyes to watch the receiver (at any given receptacle) if I am at the fuse box with a mega-ohmmeter. What I have is one dead receptacle (no lights on the receiver), but a poorly labelled fuse box with no obviously tripped breaker switches on any of the fuses. Therefore, most likely one dead fuse yet to be discovered (and then replaced). Thanks in advance.

Thanks for this video.LOI I know what you mean when you said it is not supposed to be like that.

Thank you for your video. Great job. 👏

Thanks for your useful video..!

Thank you ... Peace

Hey AMPman I'm in a house with 2 prone outlets with no ground will this system work on that because it's showing everything switch solid red.Tedious is and understatement I had 27 switches and I had to go all the way down to 4⁉️

Why does the Klein transmitter indicate correct wiring(2 orange lights are on) but the receptacle does not function?

How do you trace for a light switch? I want to update a bunch old light switches in my house, but not sure how to trace those back to the breaker. Looks like I might have to do what you did with the smoke alarm wires?

#Dave. This video was very helpful thank for posting 😊.

Great job thank you

Very helpful.

thank you - great video

Nice video. You look like Billy Bob Thornton to me. :)

Sometimes, old hooks are double hooked

Very helpful

How electrical panel can be in open place?

What’s the difference between the Klein ET310 and the RT250 testers, do you need both? Thanks

Anyone's know if this will work on circuit breaker that are broken or no good? Or does there have to be power going through the circuit breakers/a good breaker?

Buen trabajo

thank you

Looks dangerous and hard. Since you don’t recommend working with live wires on the smoke detector, should we just turn all circuits off if we need to replace our wired smoke detector?

How much you think is good price to labeled 130 breakers in a shopping center??

Will it work on a 208-240v circuit?

I bought a Klein breaker/circuit detector which continually tells me one breaker is indicated as the only breaker serving my house. I have turned off the breaker and the circuit which should be off isn't. Should I return the Klein detector or can someone direct me as to what to do?

THISMSHOULD BE REQUIRED BY EVERY LICENSED ELECT. WHEN THE HOUSEMBUILT OR NEW BOX INSTALLED,A SAFETYMREQUIREMENT!!!!!!

This tool does nothing to help u. You still have to walk inside the house to check the lights on the outlet component, then movie it to the next room, and repeat. U accomplish the same thing by turning every light on in the home or plugging something into an outlet and flipping off each breaker individually, then going into the house and seeing which light or appliance is off.

👍👍👍👍👍🔥🔥🔥🔥⚒️⚒️⚒️⚒️🪛🪛