Identifying various pinball machine parts and components - Pinball Expert

Identifying various pinball machine parts and components - Pinball Expert - Brisbane Australia

Рет қаралды 16,240

Pinball Expert

7 жыл бұрын

This show identifies the common parts and components found in Pinball Machines.

Пікірлер: 34

@suulix4065 11 ай бұрын

Very helpful and informative, thank you so much!!

@williamjohnson5121 15 күн бұрын

Thank you , could you possibly do this for older machines from the 1970's

@64mxg Жыл бұрын

Gracias por la info!!! ahora entiendo cada parte de una maquina de pinball!!!

@PinballExpert Жыл бұрын

Gracias por los comentarios.

@Lutheriarotavita 3 жыл бұрын

muchas gracias por este video. es muy útil!! saludos desde santiago de chile!

@28russ 2 жыл бұрын

That was interesting and helpful but also like to know the names of the different circuit boards, what they're connected to and what they do. Thanks.

@PinballExpert 2 жыл бұрын

Thanks for the comment and question. Since the late 1970's there have been numerous manufacturers who created different electronic systems, circuit boards and names for them. To adequately cover them would require an entire show which I may do sometime.

@28russ 2 жыл бұрын

@@PinballExpert I was referring more to the 80's 90's 20's machines but I realise even then it may depend on the manufacture. A vid on even some of them would be great. I really can't find a lot on YT. Thanks for the reply.

@davidewhite69 5 жыл бұрын

the 'ORBIT leisure centres' sticker sure brings back memories, there were two in Newcastle in 1980, dropped many twenty cent pieces there before and after school

@PinballExpert 5 жыл бұрын

Yes indeed, I was a keen player in the Brisbane City & Fortitude Valley (aka The Valley) Leisure Centres back then too. I got that Orbit plaque from a used Pinball i bought from there in the early 80's when i started my business in the Amusement machine industry repairing & operating Pinballs.

@davidewhite69 5 жыл бұрын

@@PinballExpert one of the Orbit centres in Newcastle was set up different to every other one I saw, all the machines had very short legs, about 100mm, yes one hundred mm long, and they were sitting on a raised boxed platform to bring them to normal playing height. it was next to impossible to nudge and move the machines in play. this centre was in the top end of town, a stones throw from the Hankin factory. I suspect Hankin had some influence with the Newcastle Orbit centres because every one had at least two copies of every one of their machines, either that or they got them at mates rates

@PinballExpert 5 жыл бұрын

@david white: Hankins (A Hankin & Company) owned the Newcastle & Sydney Orbit Leisure centres & Brisbanes 2 Leisure Centres, the name came from the first Pinball machine Hankins made in Australia, Orbit 1. The Pinball backglass looks like the Orbit plaque, that's where it came from.

@weggmbh1 Жыл бұрын

what is the Title of Musik on the Endpart here in this Video ?

@marchkofeeling 2 жыл бұрын

very helpfull, i get my used revenge from mars end of this week, never put my hand on a pinball before so thank you

@PinballExpert 2 жыл бұрын

You're welcome.

@tambambam 4 жыл бұрын

Thank you for creating this video. I think it would have been easier to correlate the switches were which if you showed the switches in action topside in a small window when activating them from the bottom side. Just food for thought. I very much enjoyed this video. I think I might build my own pinball machine one day. :)

@k0sashi 6 жыл бұрын

Thanks for sharing! Very informative

@minalinsky6707 5 жыл бұрын

hey

@charlessmith263 5 жыл бұрын

I think of pop bumpers as lateral up-kickers. For that "pop" sound you hear after you get a match of the last 2 digits of your score - I am guessing the knocker assembly is sent a message about the "match" score and like some pyrotechnic devices, it is given a delay time sometimes of 1-3 seconds before you hear that "knock pop" go off. Guessing that an electrical signal involving the match score is fed to the knocker assembly, and after a short delay, the knocker goes off and you hear the "pop." In some other pinball machines, the knocker "pop" happens nearly without any delay before you hear the pop - up to as little as a 1/2 second after the match score happens before you hear "pop!".

@xXMrIgniteXx Жыл бұрын

Thank you, if someone refers to a saucer target what are they talking about?

@PinballExpert Жыл бұрын

A Saucer target is usually a fixed target or a drop target located behind or in front of a Saucer (a Saucer is also know as an Eject Hole.

@robinmilton 6 жыл бұрын

Very helpful. I appreciate all this information. Suggestion for show: How do the pinball power supplies work, and how do the circuit boards control the game play (sounds/lights/etc)?

@clayremy5346 2 жыл бұрын

I know Im asking randomly but does someone know of a way to get back into an Instagram account?? I was stupid forgot the password. I appreciate any tips you can give me

@rayemmitt5624 2 жыл бұрын

@Clay Remy Instablaster =)

@clayremy5346 2 жыл бұрын

@Ray Emmitt Thanks for your reply. I found the site thru google and Im in the hacking process now. Looks like it's gonna take a while so I will reply here later when my account password hopefully is recovered.

@clayremy5346 2 жыл бұрын

@Ray Emmitt it did the trick and I actually got access to my account again. I'm so happy! Thank you so much you saved my account !

@rayemmitt5624 2 жыл бұрын

@Clay Remy Glad I could help =)

@robdickens4326 4 жыл бұрын

Mark I have Bram Stokers Dracula, he is 28 years old and he has many faults and I was wondering if you could do a show about that machine and explain all about it. I would really appreciate that.

@johnmorgan2488 6 жыл бұрын

mark I remember when I was nine years old in 1985 in sydney my dad took me to a warehouse they had a huge collection of poker machines and pinball machines he bought a poker machine for 250 dollars and nearly bought a pinball machine bally space invaders pinball for 500 dollars but he did not have a trailer

@dennisneo1608 2 жыл бұрын

My grandfather was electrocuted to death on a pinball machine in 1980. He had an arcade in Darwin, and was repairing a machine whilst still switched on. Everyone though he was yelling shit. But he was yelling SWITCH! Yes, I remember his funeral.

@PinballExpert 2 жыл бұрын

Very Sad, he was probably working on an electro mechanical pinball, most of them have exposed high voltage inside. Safety switches (RCD) in buildings these days help prevent electrocution.