idle fuel mixture adjustments pc3 pc5 pc6 how to:

Рет қаралды 8,480

CuervoATV

Жыл бұрын

Cuervo ATV Raptor 700 specialists
951-743-6328
sales@cuervoATV.com
/ cuervoatv
www.ebay.com/usr/cuervoatv

Пікірлер: 15

@stevenshelp1107 7 ай бұрын

Absolutely worked like a dream on my KTM 690. It ran so lean and wouldn't idle, added 10 percent where you suggested and it runs perfectly now. Really wish I got the auto tune so it would do the job for me for every rpm, throttle position etc. But I can tweak around enough and get it running good I believe now. Thank you.

@motiondetectedlifestyle Жыл бұрын

Good Info!!!!!

@graysquirreltreeservice7299 Жыл бұрын

Love it 😁🙌🙌

@rudycornelius5119 Жыл бұрын

Thank you

@kuula01 2 күн бұрын

Can you tell, why idling is uneven and sounds like chopping v8😅 and when driving at 1500-2500rpm its feel inefficient or numb. Otherwise, the bike works fine. It's a zx12r and it has pc3

@user-wx4wm7yi1s 5 ай бұрын

What do you have for turbo tuning info with pcv ?

@darianalford7457 Жыл бұрын

So would you say you'd want the rpms at about 1800 to 2000 or lower

@MrCuervoRacing Жыл бұрын

Depends on mods. Stick cam 1650-1750 hc3 or bigger 1750-1950. I could have dropped the idle speed some on this bike but leaving that up to the customer

@josediazyeyo3 Ай бұрын

Need some license? To use

@rafaelmartinez8460 Жыл бұрын

How are you getting the afr meter on your pcv

@MrCuervoRacing Жыл бұрын

Its on the dyno. Dynojet software is the same as the tuning software. . U can add the autotune and a Pod 300 for active gauge

@rafaelmartinez8460 Жыл бұрын

I can get a afr gauge read it n make tuning adjustments that way to can i

@chuckD1470 11 ай бұрын

This looks similar to my PC6 Dynojet Power Core software but I can't locate these changeable fields...can you advise?

@andrealcurry8403 8 күн бұрын

My raptor keeps busting up with the pc6 any ideas?

@chuckD1470 8 күн бұрын

@andrealcurry8403 The PC 6 software is not very user friendly...I put it on a Yamaha Bolt and there are literally no maps, and i never figured out how to do these described adjustments...there is an automatic adjustment option if you look around on the software and that's what I used as it was all I could do and it did work for the most part...would definitely recommend you start there.