Mustang GT 3V 4.6 Teardown! Not A Normal 3V Failure But Something That'll Kill ANY Engine!

Рет қаралды 294,596

2 жыл бұрын

Want to see a particular engine torn down? I may have already done one! I've made over 50 other teardowns from Cummins to an LS7, and from Rotary to Ram Ecodiesels. Check them out here • Blown Up Engine Tear D...
My name is Eric and I own and run a full service auto salvage business called Importapart located in the Saint Louis MO area. Part of our model is dismantling and selling parts from rare and niche market engines. If you're interested in buying parts from this engine or the other engines I've torn down, email us at Importapartsales@gmail.com.
In this video I tear down a 4.6L 3V Aluminum V8 from a 2005-2010 Mustang GT. The very first on the channel! These engines are usually plagued by timing failures and owners negligence with maintenance. This engine was different, very different!
As always I appreciate all of the feedback, comments, and even the criticism!
Thanks for watching, Happy New Year!
Catch you on the next one!

Пікірлер: 1 700

@kmackay9554 2 жыл бұрын

The connecting rods would make hilarious gear shifters.

@Nic1Moreno 2 жыл бұрын

No kidding send them to fab rats....

@dieselbronco9247 2 жыл бұрын

Perfect bend for an older T5 transmission, it would look great in a ratrod!

@paulatkinson4439 2 жыл бұрын

Yeah- hilarious- uh huh

@I_Do_Cars 2 жыл бұрын

Kmackay9554, shoot me an email at importapartsales@gmail.com and you can do that, got yourself a bent rod!

@kmackay9554 2 жыл бұрын

@@I_Do_Cars Just sent you an email. Thank you.

@scooterwoodley195 2 жыл бұрын

Here at the Ford Motor Marine Division, we scoff at those who didn’t recognize our unsinkable “bend don’t break” approach to producing the world’s first line of river car engines. The only thing stopping us is our collective imagination...and the height of our air intake. - Rod Bender, President of Ford Marine Division

@NemesisRTCW 2 жыл бұрын

Ford Marine is green all the way, we do not use oil but only water to cool and lubricate the engine. As an extra power option we can supply a water to air intake cooler to decrease detonation and maximise power.

@every-istand-ophobe6320 2 жыл бұрын

Actually it was probably some democrat who bought a new jet ski with his money from cov stocks and he didn't realize you your only supposed to put the boat trailer in the water and not the trailer and car

@justinfrappier2514 2 жыл бұрын

You're getting a rod and piston 😂😁

@fritzfedke8079 2 жыл бұрын

@@every-istand-ophobe6320 now that is funny...but only a trumpster would do sumptin like 'at

@mikespeck8642 2 жыл бұрын

That's Awesome Mr. Bender.......That's what she said.....

@generation4523 2 жыл бұрын

8 bent rods... that's a feature. It increases displacement while reducing compression. I'd say it's a perfect candidate for a high-boost application

@raimondhyperburia3855 Жыл бұрын

Nice one 🤣

@johnsnow1355 Жыл бұрын

Hell yeah just added 20psi of boost with lowered compression

@garage5125 Жыл бұрын

@@johnsnow1355 i would say he more likely lowered the compression by adding 20 psi of boost lol

@michaelruiz1421 2 жыл бұрын

Eric has a talent for finding some of the most blown to shit clapped out engines, and the fact that the causes for the engines failing are diverse makes it even more impressive. I love this channel

@I_Do_Cars 2 жыл бұрын

@michael ruiz, shoot me an email and claim a rod! Importapartsales@gmail.com

@orellh.1836 2 жыл бұрын

I've seen a lot of times you were impressed that some engines managed to contain some level of carnage inside of the block without anything making an exit. I'd say this qualifies as the most impressive example of that.

@fluffiestbiscuit 2 жыл бұрын

Really says something about the sturdiness of this specific Ford V8 block/crank, would not have expected it to hold up this much whatsoever

@johncoops6897 2 жыл бұрын

@@sharibabazabeatrice6287 . *

@I_Do_Cars 2 жыл бұрын

@Orell, shoot me an email and I’ll send you a bent rod. Importapartsales@gmail.com

@trentwilliams4014 2 жыл бұрын

*Customer states* “I drove through a small puddle one day and now my car is acting different”

@dirkdaring748 2 жыл бұрын

The same Ford engineers responsible for the Powershift automatic transmission, and the two-piece spark plug were promoted and placed on a special project to compete with Nissan's variable compression engine. One Friday night, they all met at the local pub... down by the river. What you have in front of you is their first attempt.

@itsyaboiiiiiiii1477 2 жыл бұрын

These rods did the “When she misses on re-entry”💀

@lethargicstove2024 6 ай бұрын

Took me a second 😂

@ianperkins8812 2 жыл бұрын

"Hydrostatic" drive... All kidding aside, very entertaining channel. I am about as likely to tear down an engine as pull my own teeth with a pipe wrench, but watching you do it week after week is fun. Here's to a great 2022!

@I_Do_Cars 2 жыл бұрын

@ian, you got yourself a rod. Email me at importapartsales@gmail.com

@craigweis1675 2 жыл бұрын

Like hydrostatic X suspension on the old original mini's.

@acs26189 2 жыл бұрын

Told Santa they wanted an LS engine, but got L and S rods instead.

@elytolson983 2 жыл бұрын

Don’t worry those are just the new high tech variable compression rods

@Vlado2412 2 жыл бұрын

The man who did this is a magician

@misterdeedeedee 2 жыл бұрын

that's honestly pretty damn impressive. lends credence to modulars being invincible to everything except lack of oil, even all of the issues they're famous for generally won't result in catastrophic engine damage (except the sparkplug cannon).

@lethargicstove2024 6 ай бұрын

Usually you can put spark plug inserts in to fix the problem

@keatonking879 2 жыл бұрын

7:29 (takes off water pump) “Looks perfect!” Proceeds to yeet it out of existence

@Oddman1980 2 жыл бұрын

"I didn't even need the hammer" You sound disappointed, my guy. This engine was seconds from Piston McNuggets.

@cruzanity7478 2 жыл бұрын

Really enjoyed the tear down , I don’t think I’ve seen any one KZfaq as specific as this one. Thank you 👍🏻👍🏻👍🏻

@eg2driver 2 жыл бұрын

Seeing the 928 reminds me we need to see more of it! Great work, loved the noodle rods from this engine... impressive!

@alandawson3345 2 жыл бұрын

At 10:20 in the video you could tell the rods were all bent, as all the pistons were not bothering to visit the top of the bores. That or this was the lowest compression engine I have ever seen.

@skurblord3401 2 жыл бұрын

Looks like one cylinder made it close. Just sell it as the worlds crappiest 1 cylinder.

@derekfriday7931 2 жыл бұрын

I noticed this when he was turning it over. I know they leave some extra space on the deck. But most of them didn't even visibly reach the top of the bore

@mysock351C 2 жыл бұрын

@@skurblord3401 It still works as a V8. You just put some 7.3L glow plugs in it and sell it as a semi-diesel.

@BloodIITheChosen 2 жыл бұрын

Yeap, also saw that.

@samiraperi467 2 жыл бұрын

@@skurblord3401 1 cylinder engine that kinda has spares.

@LightningStrike50 2 жыл бұрын

Honestly I would love to see the crank out with all the rods and pistons reattached to it. That rotating assembly must be a true work of art at this point.

@CathyInBlue 2 жыл бұрын

modern art

@hkguitar1984 2 жыл бұрын

I agree with Cathy (modern art), it would make a hilarious Wind Chime!

@CathyInBlue 2 жыл бұрын

@@hkguitar1984 OMG. Can you imagine how discordant striking a piston rod that's been twisted into a question mark must be?

@MattExzy 2 жыл бұрын

It takes a lot of force to bend a rod... I can't imagine the forces at work to bend most of them that bad. A few of them must've kept developing power/compression to bend the rest lol

@HKSoljier 2 жыл бұрын

i'm imagining a whacky waving arm inflatable tube man

@derklaus3025 2 жыл бұрын

I love these genius new engine designs. I've always wondered how a variable compression system would work. Now i know, thanks man! Btw I really enjoy your videos, greetings from Germany :P

@goobernoodles 2 жыл бұрын

Okay, the sound of an impact on fast forward is awesome. PEW PEW

@treadhead1945 2 жыл бұрын

So Ford is making 3 valve submarine engines now? Seriously that is a lesson in practical physics, and the compressibility of water.

@davidpowell3347 2 жыл бұрын

And some strong head bolts and gasket not to let go,

@mikefoehr235 2 жыл бұрын

Fluids...ie...liquids are virtually incompressible. Is why hydraulics work so well. Daniel Bernoulli

@jefflcox 2 жыл бұрын

A Urologist could retire fixing that many bent rods!

@jjramos46 2 жыл бұрын

As an owner of a 2005 Mustang GT 4.6 3V ive looked forward to this!

@alanbradford3130 2 жыл бұрын

Can you imagine being the guy who installed that engine? They probably spent hours trying to start it! Then, in desperation, they took off that oil pan and saw all those bent rods? I don't know about you, but I would have to resist the temptation of to ying that engine though the window of the salvage yard office!

@localroger 2 жыл бұрын

I have got to say I have learned more about both how engines live and how they die from your channel than from any other source I've seen. It's been very instructive to see how different engines are designed and put together, as well as how people manage to ruin them. Thanks so much for a wonderful education. (And I loved that you did get around to taking apart the engine that I know is in my own Ford Focus.)

@Joe-co4sq 2 жыл бұрын

I'm surprised that engine even spun with the breaker bar.

@thetigerguy8444 2 жыл бұрын

Like they say "you can lead a horse to water, but you cant make em drink." Apparently this mustang owner thought his engine needed a drink and then some. Lol. Enjoyed watching this.

@nofilter2091 2 жыл бұрын

That was impressive. All of those rods bent and not breaking blew me away

@danherrala2087 4 ай бұрын

FORD TOUGH BABY !! Lol.

@bballwes610 2 жыл бұрын

Does anyone else enjoy the sound of the impact wrench at high speed?

@gollie8776 2 жыл бұрын

sounds like a baby crocodile

@Bandit69ply 2 жыл бұрын

Yeah, i pretend I'm firing a Phaser from Star wars or Star Trek. Lol

@keithblume5159 2 жыл бұрын

Pew pew pew

@northlander4370 2 жыл бұрын

we all do ...

@biggtastee2401 2 жыл бұрын

I do. Sounds like a laser.

@josephmichuda6447 2 жыл бұрын

I've never seen a engine bend all 8 connecting rods and not bust the block.

@nitromyke 2 жыл бұрын

Happy new year! I hope you keep making these videos for a long time !!

@m4n4mk1 2 жыл бұрын

That engine looked happy on the outside. But once you opened it up, what a surprise inside! I sure was not expecting that.

@aeroman5239 2 жыл бұрын

Those con rods on this 4.6 engine went out on a bender! LOL Even they can't recall how they got to this condition...

@theshield1613 2 жыл бұрын

4.6l 2 valve is very reliable

@Martimus98 2 жыл бұрын

As the owner of a V8 Mustang from that era, I'm shocked to see someone tried to power their U-BOAT with that powerplant. Apparently they neglected to watch Risky Business, that's the kind of maneuver you perform in a Porsche 928... not in a Mustang. 🤣

@mikefoehr235 2 жыл бұрын

Well the owner of this engine was a former U-BOAT commander.

@l00k4tstuff 2 жыл бұрын

The owner tried to make the engine hydrogen powered, opting for high-density fuel Di-hydrogen Oxide. Great tear-down, Eric. I wonder if they thought the power dropped off so badly because the plugs were damaged after making the car a shop-vac. Then after changing those out didn't do anything, decided to pop the oil pan to check the crank, then gave up once they saw the rods were Twizzlers.

@chucksgarage7165 2 жыл бұрын

It’s Di-hydrogen Monoxide…get it right…LOL!!!!

@lindabotelho4934 Жыл бұрын

An 04 5.3 chev pickup hydrolocked . broke a rod, broke the block, and put a hole in the oil pan. never have i seen an engine BEND all 8 conecting rods. i've been a mechanic over 60 years. by the way. great teadown. nice job.

@EATSLEEPDRIVE2002 2 жыл бұрын

Dude I love your videos, and your sense of humor. From setting yourself up for “that’s what she said“ jokes, to commenting on inappropriately shaped water pumps, to your sarcastic terminology on things like “adjustable length connecting rods“😂 every time you upload I already can’t wait until the next one. Thank you for bringing us this content

@gabon4000 2 жыл бұрын

This might have been the case of "this pothole can't be that deep, watch me power through it". Then it went in, came out and the car was like a smoke machine, except it was water vapor coming out the exhaust. I bet the engine ran a bit cooler in the process..

@johnnicol8598 2 жыл бұрын

Girl driver. Bet anything.

@gabon4000 2 жыл бұрын

@@johnnicol8598 Or a way too confident/inattentive guy. Search for "Rufford Ford floods", there are more than 50 or so compolations of cars trying to go over a flooded bit of road. It's interesting to see the results..

@dhellis19498 2 жыл бұрын

Back in 1960 my family owned a 1956 Ford Ranch Wagon, my oldest brother painted a piston with a bent rod that looked much like one of the rods removed from this engine, below that he wrote "Rod Bender" My brother was only 14 at the time but had real artistic talent, so much so that my father liked it so much he didn't punish him and left the drawing in place

@notalkmedia1114 Жыл бұрын

I Really do respect the channel and genuinely learn a lot!!!! Thank You for the Great Content!!!! KEEP IT COMING!!!!

@justsumguy2u 2 жыл бұрын

We're always talking about resized spark plug gaps, but these are the first resized rods I've seen. I was not expecting that either, and I'm surprised it turned over at all

@randr10 2 жыл бұрын

Not to mention that none of the rod bearings looked damaged. Absolutely remarkable.

@QueensGTO_Viper 2 жыл бұрын

I hope the warranty covers Peyronie's Disease

@jonnyduncan7056 2 жыл бұрын

Happy New Year from UK. Keep up the great work and the streams Eric..

@kheg5127 2 жыл бұрын

I see the folks at Chiquita are now making connecting rods. I'm happy to see the fruit and automotive industries partnering.

@michaelchan8915 2 жыл бұрын

Wow, wow, wow and...... just wow!!! That is beyond impressive. Judging by the lack of visually obvious damage until piston and rod removal makes me wonder how that engine had to have sounded before it's demise. I've seen many of my share of rods windowing a block from a hydraulic lock failure, but never one in where ALL rod assemblies simply bent without breaking.

@randr10 2 жыл бұрын

@Alfred Wedmore That's some very impressive engineering on the metallurgy side as well as process control on the manufacturing side. It had to be absolutely perfectly done.

@jamesplotkin4674 2 жыл бұрын

That engine had so much water in it, I'm surprised you didn't find a school of sunfish in there ;-)

@DanBowkley 2 жыл бұрын

Just one crappie

@idnld1588 2 жыл бұрын

Latest rendition of hydroformed connecting rods. Excellent video as always. Happy New Year.

@dwightsimpson18 2 жыл бұрын

Bro, your absolutely awesome for the content you produce, and even more so for gifting those bent junk parts to your loyal viewers. It hurts to see a great engine from Ford being used as a water pump ! But the souvenirs that left behind our wonderful! Thanks

@GeneralSirDoctorJFK 2 жыл бұрын

Hey man love the channel! Stumbled on you 9 months ago and your civic motor tear down helped me to diagnose my own bent valve. Keep the addiction going and I always look forward to videos from my favorite mechanical pathologist

@christopherweise438 2 жыл бұрын

Literally came here right from the other "worst carnage" 4.6 tear down. Impressive to say the least. Keep up the great vids. Awesome content.

@sheetwarrior543addmeonxbox7 2 жыл бұрын

That one was a DOHC 4.6L

@christopherweise438 2 жыл бұрын

@@sheetwarrior543addmeonxbox7 - Yea....i know. Still both impressive failures though. The 4 cam bottom end was complete destruction, yet the valve train was virtually untouched. That's hard to do no matter how it happened.

@theshield1613 2 жыл бұрын

@@christopherweise438 4.6l v8 2 valve is very good.

@curtisvonepp4335 2 жыл бұрын

Amazing find 8 bent rods and it still turned over 👏

@paulalbe4587 2 жыл бұрын

This makes me think of the scene in Armageddon where Ben Affleck's character AJ is like, "Don't worry, I got this" and drills the hole in the asteroid to save the earth - except in this case it was Cletus with a Mustang through the flooded parking lot of Walmart, and real life.

@Tractors101 2 жыл бұрын

That was not what I expected... A fantastic failure for sure! Hey, at least you can say you've seen an engine bend every rod now.

@johnsommerfeld6889 2 жыл бұрын

That's amazing! Wow, all of the rods are toast. Happy New Year Eric! I've been working on watch all of your videos and only have a few left to go. I enjoy your videos, keep em coming!

@allenl9031 2 жыл бұрын

Happy New Year Eric! May all your blocks be drained, and rods straight.

@rustyaxelrod 2 жыл бұрын

Somebody bought a flood damaged car, let it sit around for a while then tried to start it. It fired up a few seconds and made a lot of banging noises, so they dropped the pan and shined a flashlight up in there and said “nope”. They kept 4 bolts to hang the pan back on it so it wouldn’t make a mess and tossed the rest in the pan. All the windage tray nuts and pickup were still hangin so they didn’t even drop them, they woulda been laying in the pan too. Thanks for the tear down video! I bought an ‘08 GT a couple months ago and this really helped me understand how this engine goes together. This is a perfect way for me to learn. 👍

@burtbacarach5034 2 жыл бұрын

Looks like she had a drinking problem. Must have been a big hit of water at a fairly low engine rpm.Seems a shame,looked like a pretty clean engine.

@nickma71 2 жыл бұрын

Looks that way to me too.

@DG-fm6ti 2 жыл бұрын

Too bad for the previous owner of that engine, but his loss is your gain. Happy new year and keep up with the great video content.

@johncoops6897 2 жыл бұрын

@@sharibabazabeatrice6287 . *

@keithelrod3812 2 жыл бұрын

Thanks for the HEAD BOLTS ASMR and happy new year

@isrealdaBandit 2 жыл бұрын

Best sound fx loving this guy

@kardy81 2 жыл бұрын

I would guess, that engine came from Cleetus or Peg; Either way, that was "full send with ketchup and eagles into the danger zone".

@samuelmorris8345 2 жыл бұрын

Some people surprise me. I never thought of using my Mustang as a sump pump. Looks like it got quite a bit of the flood before it gave out.

@erricashmitt8890 2 жыл бұрын

This is an awesome spare parts special, maybe they put spark plugs in it to try land make it run. It looks pretty clean under the valve cover, more than likely this had seen regular oil changes. It doesn't look like the block had cracked, amazing

@tap2262 10 ай бұрын

I‘m way to late to this party. That said, I have to mention how the hydraulic lock theme of this video meshed so nicely with the garaged 928 at the end. This bought back memories of the Risky Business „Who‘s the U-Boat Commander“ scene. Keep up the good work, there’s lots to like on this channel.

@yeahitskimmel 2 жыл бұрын

I've actually heard from several Ford guys contrary to what seems logical, the breakaway power of the impact is less likely to break a stuck 3V plug vs the slow constant force of a ratchet.

@Gersberms 2 жыл бұрын

A piano tuner told me the same thing: the pegs for tuning the strings can break off if you go too slow. To overcome stiction without breaking, do it quickly. I guess impact wrenches are not as tough on bolts as one may think.

@2000blackstang 2 жыл бұрын

Yup you have to do it quick like ripping off a band aid

@neilwalker8686 2 жыл бұрын

I’ve noticed this as well. Same way with allen/hex bolts rounding out.

@tomg4084 2 жыл бұрын

I heard the same thing but still had 7 of them break off on my 5.4 3v

@johncoops6897 2 жыл бұрын

I wonder why people don't put a bit of anti-seize on the plug threads before tightening them to specified torque?

@jakep519 2 жыл бұрын

I see that this engine has the new version of adjustable rods! It always amazes me to see how bad some of these engines are even though they look alright on the outside. Thanks for the great content! Happy New Year!

@Demonyc_Gaming 2 жыл бұрын

Seems like they tried to pull a Wrangler thing and go bogging. If only they realized they needed a lift kit and some good ol’ 35’s on in order to prevent their engine from drinking itself to death. All horrible jokes aside, been watching your channel for over 6 months, been subbed to 5 and 3/4 of those months. Great content. Im learning things I never thought I would about all different types of engines and potential issues one could face. Love it, keep it up, and thank you for providing this lovely content :D

@19580822 2 жыл бұрын

I had something similar happen to my 1995 5.7L Silverado. It wasn't as severe as yours, and was due to a blown head gasket allowing coolant into 2 adjacent cylinders. As it turned out, when the engine was shut off, the remaining pressure in the cooling system was pushing coolant into the cylinders, practically hydro-locking them and making it difficult to start. Once it started though, it ran fine as the pistons were apparently able to evacuate any accumulated coolant through the exhaust. Anyway, I ended up with 2 bent rods, but it still ran surprisingly well.

@unprofessionalmechanic8466 2 жыл бұрын

all 8 rods are bent... This seems like from old anecdote: Rescuers tried to decode last recording form Black Box of crashed airplane, it was "Look what I can do..." Truly , you play the stupid game of "watch me powering trough deep water", you will win the stupid prize like getting all rods bent. Happy New Year to you Eric, love your videos. This is interesting how many of us being glued to the screen watching your next tear-down more so then by another Hollywood's multimillion dollar movie.

@jfan4reva 2 жыл бұрын

The good news is they obviously kept the engine well lubricated!

@thirdpedalnirvana 2 жыл бұрын

Too bad water isn't a lubricant

@andrewjacobson556 2 жыл бұрын

Happy New Year, off to a good start so far this year, 8 bent rods!!👍👍👍!!!

@michaelworden9265 2 жыл бұрын

Like us humans and all of our fellow air breathing creatures, engines cannot breath water. Happy New Year Eric. Once again, thank you to Eric's wife and family for giving him the time to make this engine teardown video for the KZfaq channel.

@broberts1505 2 жыл бұрын

I'm betting flood car bought at auction, but given a good detail before it was cranked over. So 8 cylinders full of water. Now if it had those bluetooth rods, and crankcase vents previously installed, everything would have drained and been fine!

@IncertusetNescio 2 жыл бұрын

You must have been hiding a Staples Easy button off screen for that dipstick. You NEVER get them out that easily.

@fourthhorseman4531 2 жыл бұрын

I broke one off in the block on one of my 2V 4.6 V8s during an exhaust header install. Made me extra grumpy.

@IncertusetNescio 2 жыл бұрын

@@fourthhorseman4531 Did you have to grump-drill it out or...? Not sure the procedure there.

@fourthhorseman4531 2 жыл бұрын

@@IncertusetNescio I used a reverse-turning drill bit and was able to get it to spin in the block and back out enough that I could grab the tube with needle nose pliers and get it out. There was some cussing involved. :)

@IncertusetNescio 2 жыл бұрын

@@fourthhorseman4531 I fully expect profanities. If none are flying, you are either a "cool under pressure" person or are paralyzed with fear.

@alexboi32 2 жыл бұрын

I see a theme coming on now when “nice parts” gets yeeted right to the scrap bin haha. That water pump looked perfect! *proceeds to perform a three pointer

@davida1hiwaaynet 2 жыл бұрын

WOW. All I can say is, it looks like she actually made it home. Whoever dove it really must have kept the revs low and babied it. I got very lucky when I ran my Buick in high water and stalled it and locked it up. I was able to get it going and it seems to have survived several thousand miles after that.

@4literpowered 2 жыл бұрын

Mechanic : That engine carbon clean service will cost you 149.99 Customer : I know a guy who can do it cheaper

@davesracingchannel9261 2 жыл бұрын

kzfaq.info/get/bejne/Y7SodpOSv-DacYU.html Beater Bomb

@A.chavez512 2 жыл бұрын

“Very tough to pull” 😂

@johnrouze6280 Жыл бұрын

You are terrific, keep up the good work!!

@tylerfineman8967 2 жыл бұрын

They also had an iron block version of the 4.6 3v in the 2009-10 f150. Interesting to see this teardown, nice video!

@joncolley5320 2 жыл бұрын

That’s what’s in my truck 105k

@tylerfineman8967 2 жыл бұрын

@@joncolley5320 awesome! A family member of mine has a 4.6 3v f150 with 191,000 miles still going strong. If you keep up on oil changes they last!

@kiatruck 2 жыл бұрын

I'll be happy to take one of those bent rods and pistons. I'd put it on my desk. I'm surprised that thing ran long enough to do that kind of damage. Very impressive.

@Bartekelk5 2 жыл бұрын

This must have been the best attempt at skipping stones from driver's seat in the middle of a lake...

@eaglewingsracing 2 жыл бұрын

Was trying to think of a witty comment but I've got nothing. Would love to see some more BMW teardowns. Hope to see more great content in 2022!

@scoop-sc5gr 2 жыл бұрын

There something about the sound those head bolts make.!! Love it

@doctordifferentialspeedsho9506 2 жыл бұрын

Someone boosted the hell out of that engine!! It seen way to much boost at one point and time. Hydro lock usually affects 1-2 maybe 3-4 at most. Someone was either spraying the hell out of it with a really good tune, very unlikely, or sent the turbos / supercharger to the moon also with a really good tune on it. To bend all of them and not have it detonate was a blend of things and they were doing a pull with a little more duty cycle. I’ve done this to a Hemi engine that the customer said was “built” when it was just a stock rebuild with a cam. I’d have love to have seen when it happened cuz I’ll be it was making a BUNCH of power.

@johnathanedwards9054 2 жыл бұрын

I saw this happen on Cleatus McFarland's corvette motor in one of his YT videos

@charkey3563 2 жыл бұрын

300 shot on stock block lol

@Friend_of_the_One-Eyed_Ladies 2 жыл бұрын

Driving it into a lake at full rip will do the same thing.

@charleswp71 2 жыл бұрын

I'm willing to bet the car had one of those cold air kits that sticks the filter down low, you know the ones that claim to add 50 bazillion HP when really all they end up doing is giving you a low compression 70's smog engine. I am impressed those rods held together, seen less bent ones crack and break.

@vw5056 2 жыл бұрын

What brand was the one you saw break?

@michaellorenz7177 2 жыл бұрын

CAI causes low compression? Are you sure?

@zBrainlezz 2 жыл бұрын

@Michael Lorenz What the original comment meant is: having the air intake in a lower position makes it more prone to water ingestion when driving through puddles and such

@charleswp71 2 жыл бұрын

@@michaellorenz7177 when it's to low and sucks in water and you bend or break rods then yeah your compression will drop 😂

@charleswp71 2 жыл бұрын

@@vw5056 all brands will break, doesn't matter who made them, enough force and you end up with pieces of rods

@mrrmsfucker146 Жыл бұрын

The block still works. It even come ready for a big stroker crackshaft. 👌

@orionandronicos913 2 жыл бұрын

Been waiting for this! Its my car!

@mklak5 2 жыл бұрын

A steam engine probably did not put out as much white smoke but That seems to be an effective way to reduce compression for some forced induction.

@CathyInBlue 2 жыл бұрын

Can't compress as much if your rod is shorter. * taps forehead *

@NemesisRTCW 2 жыл бұрын

Why bother with decompression plates when you can DIY it. Just drive it into the water until you reach the desired compression ratio for your forced induction engine.

@bulkchart3239 2 жыл бұрын

that would be so cool to get a rod and piston from this. i'm legit impressed. please upvote this comment!

@tobiasstaermose 2 жыл бұрын

Look like Rodney brought the whole family to the new year's party, and what a party!

@zackparisi3520 2 жыл бұрын

Wise man once said, "dont drive a car through a puddle as you may not know how deep it is"

@Xehemoth 2 жыл бұрын

4.6L's and the transmissions they mate them to are absolute tanks. With the abuse that mustangs go through on a regular basis, i'm surprised you don't hear about engine/trans failure very often. I mean, how often do you hear someone complaining about the trans going out in their mustang?

@diablocls55 2 жыл бұрын

They’re garbage motors. Like everything else Ford made

@Xehemoth 2 жыл бұрын

You're both very wrong.

@Xehemoth 2 жыл бұрын

@Self Made Auto Soooo what engines do you guys recommend? I might not have a good frame of reference but after a bit of research google pretty much agrees with me. Its an engine known for reliability and longevity. Its easy to work on and the component placement inside the engine bay is arranged very well. I really do not know what you guys are talking about, because most of the mustangs I have seen the engine will last way longer than the life of the car. You will total a mustang before you blow an engine, and this even considers the fact that people abuse the hell out of them. Unless you are absolutely TRYING to kill the engine, you're most likely not going to.

@diablocls55 2 жыл бұрын

@@Xehemoth tell that to this video 🤣 and he literally has a blown coyote engine on this channel as well

@kingssuck06 2 жыл бұрын

@@diablocls55 There’s a bunch of Mercedes engines on this channel. Should we not buy Mercedes either? Mr cool guy cl55 ?

@robertlowman2072 2 жыл бұрын

I love the mustang it's a pretty reliable car fun to build and drive he probably had the submarine mod and wanted to do deep sea exploring for that to happen and still run...ish? That says something good about the Ford v8

@strydyrhellzrydyr1345 2 жыл бұрын

Oh. This was only from today... Awesome... Thought this was old.. just watched both 4.6

@StatusFIX 2 жыл бұрын

That satisfying sound of the head bolts undoing.

@mkpi1110 2 жыл бұрын

Ford built tough! That's why the damage was contained! Very impressive failure on behalf of the owner of said engine!

@theshield1613 2 жыл бұрын

This engine is a 3 valve, 3 valve is trash my 4.6l 2 valve v8 has almost 400k original engine.

@mkpi1110 2 жыл бұрын

@@theshield1613 I was being sarcastic ford's are complete trash engines in my opinion!!

@theshield1613 2 жыл бұрын

@@mkpi1110 expect the 3.0l v6 and 4.6.l v8 2 valve no modern dodge can reach 400k haha

@mkpi1110 2 жыл бұрын

@@theshield1613 correction I have 3 rams 2 have ove 500k and the 3rd has 610k one 6.4 hemi one 5.7 hemi and a Cummins had 2 ford's both blew up just after 160k gm and chrysler make better engine mind you they both have issues!

@theshield1613 2 жыл бұрын

@@mkpi1110 older dodge engines could last I'm talking newer dodge won't last.

@bgoins12 2 жыл бұрын

No doubt this was water ingestion damage. That's pretty impressive to bend all 8 rods.

@nothing5189 2 жыл бұрын

When it comes to flooded roads, they say "Turn around, don't drown". I think this guy said "screw it, just go through it". lol

@jaredkennedy6576 2 жыл бұрын

It would be cool to make a coffee table out of the block, with a glass top supported by four damaged pistons on bent rods. The rods would also make great awards, I've seen a few different Mack shops with bent rods on a plaque as a performance award.