2016 BMW F80 M3 Twin Turbo S55 Bad Engine Teardown. Bogus Rebuild?

Рет қаралды 164,286

5 ай бұрын

For parts Email us at Importapartsales@gmail.com or visit www.Importapart.com!
Here's weekly dose of your catastrophic engine forensics! Every week you can find a new teardown of some abused, misused and/or poorly designed engine. I've got over 150 videos of failed engine teardowns on this channel.
This week's teardown is a BMW S550B30 from a 2015 or 2016 BMW M3. This engine can also be found in the M4, and the M2 competition. This is a 3.0L, Twin turbo, all aluminum, DOHC direct injected inline 6 with valvetronic. These engines have several different power output levels but this one likely was the 425HP found in the non comp M3 and M4. They can make as much as nearly 500hp in factory trim.
This particular engine seems to have a pretty interesting past. I wish these engines could talk because I'm sure this one would have a wild story about its life as there are several questionable things going on here. These engines are NOT cheap and I think several bad decisions were made along the way that ultimately ended in someone paying a rather large bill. Let me know what you think this poor engine went through.
Why am I doing this? My name is Eric and I own and run a full service auto salvage business called Importapart. Part of our model includes dismantling core and blown engines to salvage and resell the good parts. We do not rebuild engines, we merely sell parts to those who do!
I really. hope you enjoyed this video. As always, I love all of the comments, feedback and even the criticism. Catch you on the next one!
-Eric

Пікірлер: 571

@SubtractZero 5 ай бұрын

For anybody wondering, the crank is about $1k in good shape, and a bare block is about $2k.

@59seank 5 ай бұрын

Thanks. I WAS wondering.

@crpgap9595 5 ай бұрын

$1,100 to 1,800 on ebay, $2,000 + in better condition

@Look_What_You_Did 5 ай бұрын

These viewers can't afford to watch... much less pay for used hardware.

@Dustin-gf2hg 5 ай бұрын

@@Look_What_You_Did says the one who probably still pays 20 percent apr on a clapped out honda civic

@VideosVlogsThatsIt 5 ай бұрын

@@Dustin-gf2hglol stealership moment

@allenl9031 5 ай бұрын

Theory, the original car this was in was totaled early in it's life, but engine not damaged, removed, bought by a rebuilder, that just removed bed pan to check a couple of bearing, hence the looser sets of main caps, looked good, buttoned back up, broke pan bolt, ignored it. So, put on heat tabs, rattle can paint spray. Sell. Bought as a "rebuilt" engine, then abused by the next owner.

@cirian75 5 ай бұрын

sounds about right.

@t-yoonit 5 ай бұрын

Accurate.

@williameverwine9404 5 ай бұрын

That's probably what happened

@BruceLee-xn3nn 5 ай бұрын

Sounds like you've done this before.

@crpgap9595 5 ай бұрын

If I had to guess, I'd say the rebuilders decked the warped head, added a +.3 head gasket, and called it a day.

@alflyover4413 5 ай бұрын

That is a better fit for the pieces that came out than my guess. Somebody trying to smooth out a warped head is more likely than somebody trying to raise the compression ratio a couple of tenths for more power from a turbocharged electronic engine.

@crpgap9595 5 ай бұрын

They probably checked the bottom end too but left it alone. And that top timing cassette bolt was over torqued.@@alflyover4413

@macthemec 5 ай бұрын

Valvetronic isn’t an answer to a question nobody asks, it eliminates pumping losses, a question that has been worked on from the 325e to turning the throttle pedal into a torque request meter. When you think about it, a rocker shaft is old as the hills, make it cammed so it can vary the rocker lift and have the “gas pedal” for lack of a better term act on that instead of a butterfly valve controlling air flow. I also like the failsafe they built in where in a complete failure the engine will work like one without valvetronic and operate on the redundant valve body, smart thinking

@GoldenCroc 5 ай бұрын

Exactly, it was a question, nay demand, from many european customers.

@willemb8689 5 ай бұрын

Exactly! And prefect throttle response!

@jamesgeorge4874 4 ай бұрын

Reduces, not eliminates pumping losses.

@GoldenCroc 3 ай бұрын

@@jamesgeorge4874 He probably meant in the context of the throttle plate.

@tomschlachet4310 5 ай бұрын

During a post-mortem, it's good practice to confirm mechanical timing before removing the timing components. Doing so will help you better determine the cause of any witness marks you may find. Hand turning compression may have felt and sounded OK, but I bet each one of those exhaust valves were bent just a little.

@julesviolin 5 ай бұрын

Eric often does just that . 👍

@KartmanPCR 5 ай бұрын

No intelligent person is going to use that head without checking EVERY exhaust valve.

@samh6761 5 ай бұрын

Great demonstration of the valve-tronic mechanism. I don't know if I'll ever work on one of these, but I learned a lot.

@michaelwalton3631 5 ай бұрын

I've accidentally rebuilt the valvetronic from one of the very poor siblings of this engine, the n46 4cyl. Accidentally because I actually wanted to remove and refit it as a unit while doing valve stem seals, but my cable tying was sub standard... anyway, not that difficult, no special tools needed despite rumours to the contrary. What i wanted to say is, its actually a very elegant and pretty simple bit of engineering imo. Not much different from the time tested ohc besides the electric motor. Nice to see a video of the mechanism in action.

@godmodeforever 5 ай бұрын

Watching you tear down engines week after week makes me realize just how insane automotive engineers have gotten.

@williamshappley2106 5 ай бұрын

Especially German ones…

@frutt5k 5 ай бұрын

@@williamshappley2106 Don't rule out the nippons.

@GoldenCroc 5 ай бұрын

Well yeah, the poor buggers had to...

@DefaultLoginDetaiIs 5 ай бұрын

Those cam trays are also valuable. They are interchangeable with the N54 and N55 engines and there was a design flaw in the N54 which meant they commonly wear out early causing low VANOS pressure. Maybe £400 for the pair.

@jacquesc3166 5 ай бұрын

Didn't think I'd learn something about the N54 in this comments section, but thank you...

@darylmorse 5 ай бұрын

As an owner of a BMW with an S55 engine, I'm glad to finally see a teardown of an S55. These engines are really impressive. From the factory, they were offered with horsepower from 405 to 493, all from the same long block, with the difference being the tune. With stock internals, they are good for well over 750 HP. Considering you are a BMW guy, you should know that one of the problems with the S55 engine is a spun timing gear, which manifests itself with valve to piston contact. Unfortunately, it's too late to find out if the valve to piston contact was caused by movement of the timing gear or because of a missed shift. (You would have had to check the timing before you took it apart.) This engine is in pretty nice condition and it should easily be rebuildable.

@jonb2437 4 ай бұрын

He said that if the timing was off only a few cylinders would have bent valves and messed up with the rockers. In this situation, valves hit pistons in all cylinders which is why he thinks it's from being over reved and not mistiming. So no it was not a spun crank hub

@darylmorse 4 ай бұрын

@@jonb2437 I know what he said. If the timing was off and the engine was still rotating, there would have been contact in all of the cylinders. It only has to make two revolutions for all of the valves to open in all of the cylinders. He didn't check the timing, so there is no way to know if the problem was caused by a money shift or a spun crank hub. In the worst cases, spun hubs are completely lose and freely rotating on the crankshaft, so the engine cannot run, but in the "best" case, the sprocket doesn't break completely loose, causing a timing problem which generates a fault code, but no contact. There are many possibilities between the best case and the worst case.

@kennethross786 5 ай бұрын

There's a lot of shady shops out there. I remember talking to a transmission repair shop manager (my tranny had just deleted 2 of its 5 gears on the interstate at 70 mph, so I drove it 300 miles to my destination on the 3 gears I had left). He told me he had taken a chance on buying a "rebuilt" engine from an auto parts store, only to discover the "rebuilt" engine had a blown head gasket - the exact same issue that the engine he was swapping out had! On the plus side, glad you're going to make some good money off the remnants of this engine.

@Leenre9 5 ай бұрын

Valvetronic is a very good solution for the problem of the single throttle body that limits the response time of a gasoline engine. These engines can reach their rev limit in milliseconds because of the perfectly controled amount of air each cylinder gets with just controlling the amount of lift the intake valves do as it revs up. Of course, it's complicated and if there's any problem with the system or the engine gets worn out, it can't maintane the good flow and speed of intake air and has to use the throttle body itself and reverts back to a normal gasoline engine. Usually it's pretty hard to repair the engine heads of these engines without factory technology, especially the seating of the intake valves is the most critical point of this whole thing. This makes them a pretty expensive engine to maintane.

@jacquesc3166 5 ай бұрын

This comment should go to the top for education/awareness sake. Thank you.

@volvo09 5 ай бұрын

Thank you! I was wondering the benefit, and not having to wait for intake vacuum to "go away" makes complete sense. I had heard the system was designed to reduce pumping losses, but that never made sense to me, because why does it matter if the intake vacuum comes from a mostly closed valve, or a mostly closed throttle body, the cylinder will be fighting the same amount of vacuum to maintain a power level.

@johnparker221 5 ай бұрын

Congrats on a profitable teardown. Now for Erics homework. Once a at the end of the a video, we get to see the vehicle of the week being tore down. Once a month, I would love to see pictures of a vehicle being tore down(sequence of pictures) and see Erics pocketbook in a happy state. As the vehicle gets parted out, we get to see the nice parts, and then finally, the poor remains in the scrap bin. It would be nice to feature the tech involved in the tear down and his triumphant meal at Mickey Ds or even a steak. Just a suggestion. It would be fun too.

@longrange1977 5 ай бұрын

So in other words, I do Scraplife Garage? I fully second this.

@aland7236 5 ай бұрын

Someone's money shift helped put Eric's kiddos through school and gave us some entertainment this evening. My old Honda Accord had a mechanical lockout for 1st when moving over a certain speed, I dont know why the same mechanism couldn't work for 2, 3, or 4.

@presinald 3 ай бұрын

Probably to get money shifters to spend more money at the dealership and to save the cost of implementing that tbh

@Ponykotze 5 ай бұрын

This thing is a stunner even inside, it’s engineering at its best

@KevTech1 5 ай бұрын

LoL

@jannehokkanen8175 5 ай бұрын

Nope. LS is way better engineered. Biimer looks nice inside though.

@bennv5909h 5 ай бұрын

20+ years ahead of and ls engine

@GoldenCroc 5 ай бұрын

@@jannehokkanen8175Apples to oranges, comparisons impossible since eveything targeted during development except both going into 4 wheeled vehicles, were different.

@nickolaswilcox425 5 ай бұрын

got to see an engine with inspection ports and a piston delete in person today, helped to remove it from a solara, lack of oil, but hey, it still turns over and two of the pistons still seem okay, one had the crank bearing section of the rod shatter and get pulverized and its neighbor got a bent rod as a consequence, im hoping to get a good desk ornament from one of the two bad cylinders once the head comes off

@kevincurry4735 5 ай бұрын

As you read this comment have yourself a great day while watching Eric tear down this bad BMW engine.

@robbytheremin2443 5 ай бұрын

Saying a bad BMW engine implies there are good BMW engines. *tactical eye roll

@kevincurry4735 5 ай бұрын

🙄😆😂🤣

@auntbarbara5576 5 ай бұрын

Thats' lime saying "drug deal gone bad", there arent any good ones 😉

@POVwithRC 5 ай бұрын

I will 😊

@POVwithRC 5 ай бұрын

@@robbytheremin2443There are. Plenty. It's just they can become bad with neglect.

@decentdan_k 5 ай бұрын

Huge fan of the channel Eric! If you come across an Audi 3.0 TFSI supercharged from 2010-2016 or so I bet theres a bunch of us who'd love to see a tear down. One of Audi's more relable motors from my understanding.

@NickV2k9 5 ай бұрын

I second this. Would love to see an Audi 3.0 teardown

@dustcommander100 5 ай бұрын

Best engine I've seen you tear down, and I really believe you deserve a lot like it. In fact, I was thinking you might rebuild it and put it in one of your project cars. I just can't relate to BMW's, but I'm amazed by your knowledge of them. If anybody can successfully navigate the pitfalls on those cars, it is you. I'd lose my shirt!

@skildude 5 ай бұрын

1 minute in and I see that the Water Pump is missing. Dang, no smashed pump today

@dot6849 5 ай бұрын

Since seeing this nice engine compared to some of the blown engines, I can tell the difference between “clean” and “varnished”

@Blurky82 5 ай бұрын

I bet that oil pan gasket is going to live on that rack post forever now😆

@Benton0812 5 ай бұрын

thank you for my mental health reset as always, watching you do a tear down is so calming

@jeffreystaley5266 Ай бұрын

Wow! Seeing the inside of this engine was quite an experience. The variable valve timing mechanism was amazing. The crank was a work of art with those sculpted counterweights. All aluminum and beautifully machined. Now I know why the price hike for the M cars is so steep. This one might mess you up a bit because it makes many other engines look so pedestrian. Thanks for showing it to us.

@mahcooharper9577 5 ай бұрын

Well we all like carnage but it's nice to see you actually made some money out of this one! And it certainly wouldnt be the first engine to get a lick of paint and be sold as "remanufactured"...

@CosmicMomentumX 5 ай бұрын

A moment of silence for the "numbers matching timing guide". Thank you.

@encinobalboa 5 ай бұрын

That it shatters like glass does not inspire confidence.

@jaredbawden6707 5 ай бұрын

@encinobalboa try it with a cast camshaft and see what happens. Eric has done this once too. Just dropped it....

@jonsmith1914 5 ай бұрын

Congrats on finding a good score with this engine. I've been watching your channel for almost a year now and it keeps getting better and better.

@jakep519 5 ай бұрын

Been waiting to see an S55 for a while now! Glad you were able to find one!

@jeffreyshepherd8488 5 ай бұрын

I love how it went from crack the cam caps, to cam the crack caps, to lets cram these off 😂 the evolution of that running gag and all of your running gags has been fantastic

@Hdaledevore 5 ай бұрын

You never disappoint, great videos keep em coming

@blanketboyactual5264 5 ай бұрын

Love these tear downs so much. They’re so satisfying!

@bobcoats2708 5 ай бұрын

That was a lovely bonus inspection port someone created in the valve cover.

@c7uster43 5 ай бұрын

I only watch these videos to see how you discard the chain guides and timing set. Never disappoints.

@kristensorensen2219 5 ай бұрын

That is a nice piece of engineering! Too bad the RPM limiter failed😂😅😮 & the valves got slapped! Glad you found a winner Eric, for tonights teardown!!❤

@m.kriddick2731 5 ай бұрын

A suggestion for Christmas, can we get a heart warming story of how you and Blue met, how long you've worked together, maybe some stories from your past. As much as you and Blue work together I'm sure I'm not the only guy who wonders about how you guys met and became coworkers...

@raykaufman7156 5 ай бұрын

Nice score. The rotating assembly was gorgeous.

@ghettobutter 25 күн бұрын

so cool to see the inside of an engine i've spent so much time on the outside of thanks for taking the time great videoi!

@ScottJ175 5 ай бұрын

A whole series of Festivus miracles on this teardown.

@johnmoore8599 5 ай бұрын

Great news! Glad it's a money maker! Thanks for the teardown and opinion on what transpired!

@jbrown7403 5 ай бұрын

Great video! I drive a F82 M4 with this S55 engine and I love it. Really cool to see this engine tear down! 🏁👍

@ouch1011 5 ай бұрын

The *S* in a BMW engine means it is *S* ubstantially less reliable than the M or N version of the engine. That’s bad news for the notoriously unreliable N55. I’ve said it before and I’ll say it again, I’ve _never_ seen one of those heat tabs that was still intact. They always melt as soon as the engine is brought up to normal temperature. They are not an overheat indicator, more like a “this engine was started” indicator. What I’ve been told is Valvetronic is meant to improve engine efficiency by reducing pumping losses, because it takes a fair bit of energy to pull the piston down against a vacuum. The problem with that theory is that you’re still pulling the piston down against a vacuum whether the restriction is being caused by a throttle plate or an intake valve that barely opens. Another possibility is that they’re trying to improve fuel atomization by increasing air velocity past the value with a small amount of valve lift, but I wouldn’t think that would really be an issue with a direct injection engine.

@GoldenCroc 5 ай бұрын

N55 notoriously unreliable? I guess it all depends on the perspective you got.... Anyway, what can be said is valvetronic seemingly really does make a big difference in efficency.

@dylanoppeneer2354 5 ай бұрын

the n55 is very reliable if well maintained

@ChumpyChicken2 5 ай бұрын

That was awesome to watch! It looks engineered for big power. Shane the turbo’s were missing.

@stephenshort839 5 ай бұрын

Your knowledge of the many types of motors that you have is VERY IMPRESSIVE.

@chrisbradley3224 5 ай бұрын

Crank hub spun on this engine maybe initially? When the diamond friction disc that holds the cam drive sprocket to the oil pump sprocket and crank snout fails the sprocket slips and timing is lost. It's the only common S55 failure mode. It only slips a bit usually though.

@dudeman659 5 ай бұрын

I was thinking the crank hub spun as well. S55's are known for doing that with high power mods.

@erikandreassen6531 5 ай бұрын

A common rebuild problem, skim the top of the block then skim the head (if not flat) throw it back together with a thicker gasket. Then the gasket crushes during running and the one thing they should have done but didn't was to turn the tops of the pistons back to clearance.

@joemuncie9187 5 ай бұрын

BMWs are, like their Benz cousins, very well engineered and built. Unfortunately the average BMW driver is a savage.

@user-jl7hx1zz6d 2 ай бұрын

Fun fact. The valve-tronic engines actually still need a throttle body. At its most basic concept, no throttle valve no vacuum. There are some really awesome videos that go in depth to disprove the myth of not needing a throttle body. Very cool video by the way.

@haaseuros9789 Ай бұрын

Well that's why they have vacuum pumps lol

@user-jl7hx1zz6d Ай бұрын

@@haaseuros9789 Not enough brother it's simply an assist.

@paulphillippe5862 5 ай бұрын

Excellent video!

@Skeeter69420 5 ай бұрын

Thanks for another great video to finish off my Saturday night.

@timbrown9731 5 ай бұрын

Love to see you get your hands on an S65 Eric!

@MacGyver-1 5 ай бұрын

The marks on the side of the cylinder walls correspond with the coolant passages that are drilled at the same angle between the cylinders. If I had to guess it's because the temperature differential in that area

@jetro7349 5 ай бұрын

Crank hub probably spun, if you take off the big front center bolt on the crank the front chain sprocket/hub is held in place by nothing but the torque of that front bolt... They often spin causing the engine to go out of time. DCT's are a little more prone to this when kicking down gears. There are quite a few aftermarket fixes and it's quite expensive to have them done.

@benmorris5046 5 ай бұрын

Exactly what I was thinking. Not an uncommon problem on these engines at all.

@jaimearredondo4131 5 ай бұрын

I came here to say that - 100% that is what caused this

@TML34 5 ай бұрын

Wrong. There are friction disks in addition to the crank bolt.

@bigboost2641 5 ай бұрын

My guess too, relatively rare to slip on standard power but a lot more common on a stage 1.

@CaptainSpadaro 5 ай бұрын

Is the crank hub that large an issue on 16-later cars?

@jp2246 5 ай бұрын

23:34 score! that was impressive 👏

@GregOliverJr 5 ай бұрын

I love seeing the bmw and toyota engines. I found this channel by the 5vz teardown (as i have one that luckily doesn't need torn down) and been watching ever since. It would be cool to see a m54b30 (another engine i own) if you ever run. across one.

@Kiham80 5 ай бұрын

Must be a very big engine if Eric can run across it.

@samuelbeasonjr.3308 5 ай бұрын

It's Saturday night and I'm looking forward to this tear down and a beer.

@dehypnotizerz 5 ай бұрын

Eric, thank you very much for your teardown videos. Thanks to them I really learned a lot about engines. I've small request for you: don't you happen to have an AMG A35, 4 cylinder, 306 HP engine (or a similar one) waiting in line for the teardown? I'd like to know what do you think about such a heavily stressed engine, what to avoid and if driving it gently I can rely on such an engine. Thank you and all the best!

@waverleyjournalise5757 5 ай бұрын

New oil and filter every 5k, drive gently until warm, and any modern engine will see you through just fine

@dehypnotizerz 5 ай бұрын

@@waverleyjournalise5757 Thanks, bud and sorry for the late reply. I'm very gentle on cars and I frequently check whatever I can check. No dipstick, so I found a hidden, service menu: the stealership changed my oil exactly as I told them, i.e. after 5k, twice already and the last time they added 0.3 liters more than the nominal level, but with almost 6 liters of oil in the engine I believe it's more or less okay. I'm still learning the thing. A week ago I was speeding on a freeway and while braking it was dragging me to the right. It was visible on the dashboard (temps were higher, particularly in the right wheel). I quickly called the technician and the car senses the crosswind, would you believe that? Upon return, it was dragging me to the left under the braking. Electronics literally everywhere, but at least it's a gas-guzzler, not a lame EV. But aside from the cars, I'd like to wish everyone a Merry Christmas and a Happy New Year! Thank you all for all your sympathy, it's a great channel, which apparently gathers really cool folks. All the best and stay safe!

@AB-nu5we 5 ай бұрын

The water pump get sold already? Congrats on such a good find.

@zo6beast973 5 ай бұрын

Great video

@WFCinSC 5 ай бұрын

very nice... great to see useful parts!

@702Wolfi 5 ай бұрын

Bearings look like owners liked giving it full beans when the engine/oil was cold.

@Chchchopstickss 3 ай бұрын

Im getting a longblock for 2k this weekend hopefully its not bad, it was a sized intake cam. but fingers crossed. learned alot and what to look for with this video. thank you

@michaelmooney1474 5 ай бұрын

Damn I love these freakin things. Takes alotta time young man. THANKS SOOOO MUCH

@flyer709477 5 ай бұрын

Best part of my Saturday night!!!

@tedathome3 5 ай бұрын

soon as i heard " want to hang on to these" i said in my head Happy Birthday to the ground. Love your videos. You show me things I would never have seen. P.S I went there

@drewholland8002 5 ай бұрын

I’d love to see a Mitsubishi 4G63

@stger2384 5 ай бұрын

Wonderful! I'm (surely not the only one) always happy if it's not carnage or huge damage.

@marathoner43 5 ай бұрын

Another great video. Thanks for my Saturday night entertainment.

@patstevens2959 5 ай бұрын

Love this channel!!!!!!!!!!!

@TopherSnags 5 ай бұрын

Been waiting for this one! :D

@burningpentagram666 5 ай бұрын

Maintenance? Dude , I live in England and that seems to be a dirty word. Here we run everything into the ground , and then a couple of miles ( 10k ) more. If it really stops working , just change oil , add some anti-seize and use the biggest bar to spin it up again. Should be good for another 30k miles.

@DOCTOR_KIA 5 ай бұрын

here it is!

@18Macallan 5 ай бұрын

Thank you Eric!👍

@johnwhite2663 5 ай бұрын

Nice to see you win one. Congrats!

@justinfernandez1156 5 ай бұрын

The ole aerosol overhaul huh?

@vincenthardman7691 5 ай бұрын

Watching this video really gave me the impression you'd done this before. :-) Thanks for the video.

@AlexCapi 4 ай бұрын

12:08 that camshaft bearing ledge is used in the N52, N53, and N54 also.

@shaun9067 5 ай бұрын

Best engine this year for parts

@liver.flush.maestro 5 ай бұрын

Congratulations on your nice core !!! 👍

@BWADaniel 5 ай бұрын

Can you please keep your eye out for a 4.7L M139 Maserati engine. I’d LOVE to see one of these get torn down. Even if you find the 4.2L, cool!

@IllusionInfusion 5 ай бұрын

Nice sound from cramming them crack caps loose.

@chrissavage5966 5 ай бұрын

Many years back in the UK, there was a company that sold rebuilt engines called 'Gold Seal'. Yep, the engines came with an overall (and I mean overall) coat of gold paint. Oddly, they never seemed to last very long..... Rattle-can rebuilds don;t seem to last.

@komtgoed8330 5 ай бұрын

Possible that the crank hub spinned. They do sometimes suffer with this problem. Love the channel!! All the best from holland!

@jonb2437 4 ай бұрын

Although that can happen with this motor, when he took it a part the timing wasn't off. Spun crank hub immediately throws off the timing.

@steveblackbird5174 5 ай бұрын

Great teardown, and great shot with the oil pan gasket hahahaha

@SpyC7277 5 ай бұрын

First I'd like to wish you and your family a very Merry Christmas!! We Love your vids! Please don't stop making them. However, I've seen you teardown my fill of BMW and Mercedes engines. What I'd really like to see is something exotic. How about Lamborghini, Ferrari, Aston-Martin or even a Lotus. Like you I LOVE Lotus!!!!!!!❤ Yes, yes, yes,...I can imagine how insanely expensive they are. But it would be super cool to see. Thank you for awesome content! Be safe, enjoy and have fun.

@bretttully2771 5 ай бұрын

If I had gotten a broken bolt out that easy I would’ve stopped on the way home and bought a lottery ticket. My guess on the gunk in the oil pan is soot or carbon. Had a Cummins spin a bearing because of enough of that gunk plugged the oil pickup. But if you rubbed it between your fingers it just disintegrated. Found out the turbo was leaking oil internally and probably the reason for soot buildup, but nothing ever confirmed.

@TheNationalTrails 5 ай бұрын

"Big Block" for Importa! Nice to see.

@sparkyprojects 5 ай бұрын

I've owned 4 Triumph Heralds, they have light springs (you can compress them with a couple of thumbs), they were prone to Valve Bounce if revved too hard.

@theairstig9164 5 ай бұрын

1950s rev limiter

@marcgirard7551 5 ай бұрын

Why, oh why does BMW keep insisting on using the plastic valve cover that does not last?!

@martinllanos4998 5 ай бұрын

This is a typical problem wjth s55 and the main problem is crank timing sprocket slipping from the friction disk. I would check send out the crank to machine shop to make sure the front shaft is not bent

@erickinkhorst555 5 ай бұрын

Give me a smallblock any day. Great video as usual.

@kayciecarryl3366 5 ай бұрын

Ahhh, first video of the day and first coffee of the day! A great start. 👧

@BigUriel 5 ай бұрын

Early version of this engine were prone to slippage of the friction ring that holds the crank hub. A small slip can cause the engine to move out of timing but not enough to visibly bend valves. Some engines survive these failures with little to no damage, the valves may be bent enough to leak and throw up misfire codes but not enough to see with the naked eye.

@darylmorse 5 ай бұрын

It's not just early versions of the engine. As far as I know, based on the part numbers, the design was never revised. I'm pretty sure any S55 can potentially have the problem.

@luker3456 3 ай бұрын

This was only addressed in the s58 and can happen to any s55. Although its usually only caused by lots of power or agressive use of the kickdown function on dct cars

@darylmorse 3 ай бұрын

@@luker3456 There is little or nothing in common between the S55 and the S58. They are completely different designs, but you are correct that this problem doesn't happen on the S58.

@luker3456 3 ай бұрын

@darylmorse nothing in common except for the displacment, cylinder count, number of turbos, manufacturer, bore diamiter, dual vanos, valvetronic and direct injection. Infact s58 is so different that it has 0 4mm extra stroke 🤣

@darylmorse 3 ай бұрын

@@luker3456You are clearly clueless about these engines. Take a look at the parts diagrams of these engines. They might have a few fasteners in common, but even that is unlikely. The B58/S58 are clean sheet designs. The camshaft drives are at opposite ends of the engine FFS. The reason why there is no crank hub problem on the x58 is because there is no crank hub!! The camshaft drive is part of the crankshaft. Get a clue before you post nonsense.

@davidstuck2866 5 ай бұрын

I know that you know this. but, it might be beneficial for you to put some parts solvent in the ports of the valves that you suspect are or may be bent (and show the results). that would give an idea to anyone who may be thinking about buying the head. if they do leak, he or she will KNOW that they will need to replace the valves. and if they do not leak, then there is at least a chance that they might be salvageable. I know that if I was looking for a head, that is something I would want to know.

@billhyde2303 5 ай бұрын

The engine gods re smiling on you today!

@terrynagle7410 5 ай бұрын

I am happy you won this engine.

@Bigdaddyslasher 5 ай бұрын

Nice score congrats

@bennv5909h 5 ай бұрын

Eventho bmw has bad history, you gotta appreciate how advanced the engineering and serviceability is in this engine, all thoes parts that could fail but everything working together to keep it in perfect shape. True motorsport inspired

@GoldenCroc 5 ай бұрын

Well it depends on what you mean by "history", it was mostly 2000-2010 era that were the real dark days, after and especially before that, they were considered some of the best engines out there in most metrics.