yeah, I'm glad I seen this video. So other just say put the pin in hole and it pops right out, and it doesn't come out. Thank for showing this.😃
@AzMarineGhillie2 жыл бұрын
So, all you have to do is line up the thing with the other thing and then you can move the thing into the thing. Total clarity 😜
@AzMarineGhillie2 жыл бұрын
Much easier to understand by watching. I have saved it because I am going to be replacing the one in my wife's today.
@travisgilbert97179 ай бұрын
😊
@nichevo1 Жыл бұрын
Around 5:20 he begins talking about the actual problem where you can't turn the cylinder even with the key, or rather he talked a bunch. Bunch but at this time he is pointing to the actual element on the cylinder which you have to manipulate with your pic or shim or dental flosser to push inwards at the same time that you turn the cylinder, presumably with the key in it, but perhaps with any key or a screwdriver. Now I will finish watching, but already from another video I learned that I need a certain sort of bendy pic thing to push the tab of metal in. So I will go get that and then come back and try and complete this. But for the first 5 minutes you could probably just skip or fast forward. Edits: 1) the shim must be quite strong and stiff. I sacrificed a dinner fork and the tine was strong enough, but many lesser metal or plastic strips failed. 2) other advice I'm going to try: turn key to On or is it Run, put in D, this will lock out starter motor and then you can turn key to Start and it won't start while you remove cylinder.
@angelthehomie73634 ай бұрын
Life saver
@jeremyhaden952910 ай бұрын
Great video, explained very well, better then the other videos i watched
@abrahamautofix306910 ай бұрын
Thank you buddy
@brandyrobison9595 Жыл бұрын
DO NOT DISCONNECT BATTERY JUST PULL STARTER RELAY OTHERWISE YOU'LL HAVE TO TOTALLY RELEARN YOUR ECM/PCM..DO NOT DISCONNECT BATTERY !!!!!!!!!!!!
@winstonwright36132 жыл бұрын
Don't get me wrong, because I'm thankful for the information. But that information could have been delivered in 30 seconds and then it might not have been the most painful thing I've ever had to listen to In My Life.
@jesustalavera6282 жыл бұрын
With you mouth you can say many things learned other lenguage is totally different I hope you get that
@ec66102 жыл бұрын
Gracias amigo
@garylucas71665 ай бұрын
Thanks it worked 👍
@wendysutch-kiser36958 ай бұрын
needed ro watch before calling a locksmith
@marios7759 Жыл бұрын
Real helpful thank
@perryjoe173 ай бұрын
Very helpful
@lildaddiable2 жыл бұрын
Great video💯💯
@abrahamautofix30692 жыл бұрын
Thanks buddy
@stuartrodriguez2602 жыл бұрын
Hello nice video! Does any one knows how many magnets the ignition switch have?
@PedroMartinez-sf3ze3 ай бұрын
The thing is that if could be shorter
@edwincarpio68142 жыл бұрын
My car got broken into replaced the ignition switch and now the car turnes on with out a key
@76crx Жыл бұрын
But if u get them from a local shop then u have to use 2 keys ? one to see😮star the truck and other to open the truck or are u able to use the same key ?
@abrahamautofix3069 Жыл бұрын
Yeah You need one to Open the truck and the other one to start the truck
@nichevo111 ай бұрын
@@abrahamautofix3069 or get an uncoded cylinder, go to GM dealer with owner's registration and DL, they will give you the combo, you can encode the cylinder to fit your key.
@RoadsideGarage Жыл бұрын
Makes no sense. What if the keys are lost? How are you going to replace the key cylender when it requires it to be on the on position to be removed?
@abrahamautofix3069 Жыл бұрын
You can do it with the drill my friend
@belosadity47468 ай бұрын
see i can turn my key but it won’t turn all the way over to crank HELP
@colbyhartman9467 Жыл бұрын
👉👈 are we talking about fixing a truck or se* because in and pulling out im confused af 😂😂😂😂😂😂
@abrahamautofix3069 Жыл бұрын
It was the only way my friend, fixing it buddy.
@colbyhartman9467 Жыл бұрын
@@abrahamautofix3069 brother I'm just hacking on ya as in joking with you is all don't take it personally I like to have fun with people is all I got a lot of information from your channel thanks 👍
@abrahamautofix3069 Жыл бұрын
@@colbyhartman9467 I got you bro,,,,no worrys
@cruz3065 Жыл бұрын
En then 😅
@gerardomartinez93412 жыл бұрын
Too much talk
@ogbigerndog8352 жыл бұрын
hard to understand. i'm sorry
@stevenjames7073 Жыл бұрын
Wtf
@rickchappell5418 Жыл бұрын
Does not explain very well
@SquirrelPremeir68 Жыл бұрын
Can’t talk
@erveybarragan93372 жыл бұрын
What if you dont have the key to turn the ignition
@abrahamautofix30692 жыл бұрын
You will need the key to put it on the right position to press the lock and than remove the cylinder,thank you
@jimfranklin49232 жыл бұрын
Then your screwed
@matandrea24144 ай бұрын
Drill a small hole in the cylinder housing, about 90degrees counter clockwise of where the release hole is, use a pin the same as you would int the release hole, it will become free
@matandrea24144 ай бұрын
Just had to do that
@edwinelencanto5800 Жыл бұрын
Would be and than,, better to just watch and than, not say a word and than. If you And than don't talk it would be much better and than
@nichevo111 ай бұрын
Maybe do the work on camera, quietly, then later do a voice-over.