No video
Igus Drylin Polymer Bearings on MK3S+ - Pitfalls, Worth it? How to avoid issues.
Рет қаралды 3,149
Күн бұрынI tried out some Igus Drylin Polymer Bearings on my MK3S+
There is a print that lets you load the bearings as they need to function correctly
The cover print I used is here:
www.printables...
@ivyr336 6 ай бұрын
Seen plenty use the plain bearings. You shouldn't do that. The polymer bearings are designed to be oversized and once they are in their metallic sleeves they reach the correct tolerances. It's because they are soft, any inconsistent load on them from something like a screw as you discovered will deform them. Really not worth using unless you also get sleeves.
@Etrehumain123 10 ай бұрын
Dude this noise on X axis is exactly what I have on my kit built mk4 - Drives me nuts, and everyone is complaining about it
@jeftesantiago 9 ай бұрын
I have the same problem with my Mini. I try to replace the bearings to see if it did anything but nothing seems to work.
@ivyr336 6 ай бұрын
The mk4 had a bad batch of motors, did you contact support regarding your machine? Could be that you got one of those.
@tannernewton8543 Ай бұрын
I had the exact same issue with those on my lulzbot, kinda a big issue
@BH4x0r 7 ай бұрын
you can use the aluminium encased ones but they're expensive but those have the correct clamping force as they should be tight fully encased
Chris Riley
Рет қаралды 29 М.
Made with Layers (Thomas Sanladerer)
Рет қаралды 87 М.
Aurora Tech
Рет қаралды 151 М.