IKEA MALM 4 Chest of Drawers Assembly - IKEA Dressers and Storage Drawers

Рет қаралды 511,999

4 жыл бұрын

IKEA MALM 4 Drawers Chest Assembly. IKEA Dressers and Storage Drawers. learn-share.net/ikea-malm-4-c... The MALM dresser fits in the bedroom or wherever you place it, comes with smooth-running drawers and colors. 💟 Subscribe for more goo.gl/zp1F6R
Find Home Deals and Promotions ➧ amzn.to/35sPSWu
Assembly Tools ➧ amzn.to/2PDXJgX
Watch next ➧ • IKEA PAX Wardrobe Slid... IKEA PAX sliding doors wardrobe
- You can attach the MALM chest of drawers to the wall.
- Smooth running drawers with pull-out stop.
- Organize inside with SKUBB box, set of 6.
- The drawer holds about 15 pairs of folded pants or 30 T-shirts.
📬 Thanks for watching, and Subscribe if you haven't already. learn-share.net/subscribe-news... .
➥ Amazon Coupons!! amzn.to/2Oobr5S
➥ Best Amazon Today's Deals amzn.to/2MHmwM2
✔︎ Save $$ in Health Care and Beaty: amzn.to/1WGHgEU
#ikea #dressers #malm #chest #drawers

Пікірлер: 202

@learnshare 4 жыл бұрын

➥ How to renovate my old house kzfaq.info/get/bejne/e8h7hKles9nYk3U.html Playlist DIY Home Improvement kzfaq.info/sun/PLQJGHOK40fH_ujAXKWHTGGV8kDQcBAqwy

@Treavon24 2 жыл бұрын

Perfect very simple just 2 tools

@nomytheone 4 жыл бұрын

I was looking at this video as an extra help while following the manual, and I think that makes the most sense when you want to make sure you're doing everything right

@BCCCHenry 2 жыл бұрын

Who asked

@ally4629 2 жыл бұрын

@@BCCCHenry I did

@florianabianchini2440 Жыл бұрын

I did exactly the same!

@lcglazer 5 ай бұрын

How do you get the drawer out? I see there’s a simple locking mechanism on it but it’s hard to reach to unlock. Also what does the locking rack mechanism at the back of the dresser? Thanks

@jennster311 2 жыл бұрын

This video was super helpful to me! Thank you for sharing it as I wouldn’t have been able to build mine without the guidance!

@IanVehrmt 4 жыл бұрын

Thank you for this video. I mostly just double-checked that I understood correctly from the printed instructions, but I actually got stuck when mounting the sliding rails on the drawers, as well as the guard/support that goes below their middle, and on inserting those little white screws on the backsides, so it saved me from some headache.

@betzan3268 4 жыл бұрын

this video was very useful !!!! I made it myself with 37 weeks of pregnancy 🙏🏻 thank u

@learnshare 4 жыл бұрын

I'm so glad!

@mariam_ghanii 4 жыл бұрын

congratulations and great job like oml i could never- hope you and your family are well :)

@godlover1606 3 жыл бұрын

Hmm. I congratulate you. I feel like paying someone to do it after seeing this. Looks intimidating, I have never done this.

@aissatanimaga7152 4 жыл бұрын

Un grand merci pour votre vidéo ça m'a vraiment aidé

@lucycaldwell7113 2 жыл бұрын

Just bought the Malm 3 drawer chest and I think this video will help a great deal while I'm assembling! Thanks for videoing your experience!

@juanarocha8629 2 жыл бұрын

Just finished setting it up. Thanks a ton!

@learnshare 2 жыл бұрын

Great to hear!

@JerryLiu8 2 жыл бұрын

Thank you so much for this tutorial! Your video made the assembly so much over the printed instructions. IKEA should pay you to make these tutorials for their products!

@avb2522 2 жыл бұрын

Thank you for the video. Helped me to set up my Malm drawer today.

@yvonnebridges5492 3 жыл бұрын

Thank you finally have been able to build a flat pack for myself

@PhilUKNet Жыл бұрын

I have a couple of the same units coming next week. I've done this kind of thing many times, so no problem, but what I really like is the strengthening bar underneath each drawer to prevent the bottom of the drawers from sagging. Haven't seen this on other units, but it's a really good idea. I could have bought similar units for a much cheaper price, but I think that you get a certain level of quality with IKEA. There also seems to be one more additional step because of IKEA's insistence (for safety reasons) that the units be attached to the wall in order to prevent them from toppling over.

@davidsylviaesperanza1574 3 жыл бұрын

Thanks, made my assembly process easier..

@Shareneex 2 жыл бұрын

This has been very helpful thank you 🙏🏾

@Travis_22 2 жыл бұрын

Good visual aid, thanks for posting!

@kawaomarAGHA 4 жыл бұрын

Very well done and made my assembly so simple! Thanks so much for helping this old man.

@lcglazer 5 ай бұрын

How do you get the drawer out? I see there’s a simple locking mechanism on it but it’s hard to reach to unlock. Also what does the locking rack mechanism at the back of the dresser? Thanks

@asmaalomari5410 4 жыл бұрын

Thank you soooo much your video helped me a lot 🙏🏻👍🏻💜

@learnshare 4 жыл бұрын

You’re welcome 😊

@YM-Yarmuk 3 жыл бұрын

I really appreciate, it helped a lot 👍

@selamhaile2487 4 жыл бұрын

Very helpful thank you 🙏

@mijalic1 2 жыл бұрын

Great job. thank you for your time and effort to make this video and share it with us. Greetings from Croatia

@bomanclackhanger 3 жыл бұрын

Thank you for the video. I didn't know if I would be able to do it by myself but I think I can now

@Gabriel-fi6wh 3 жыл бұрын

How’d you buy it? They are out of stock everywhere I have been trying for the longest to buy one

@mayramirez5340 2 жыл бұрын

Thank you! it really helped me great video 👍

@amaanamufeel6642 Жыл бұрын

Thanks a lot for this video. Helped me build mine easily! 👍

@poppen33 2 жыл бұрын

You are a lifesaver! Thank you :)

@acbent11 2 жыл бұрын

Very helpful video! I just built the same. It seems Ikea got the white tape on the frame rails upside down. You can see the exposed MDF on the tops of the rails when the drawers open and the a nice finish on the underside of the rail. Mine is the same.

@jeybird6276 2 жыл бұрын

Thats literally why i went looking for this video. I thought i dis something wrong!

@cristinarubiofit701 3 жыл бұрын

THANK YOUU!!! MADE IT SOO EASYY!!

@learnshare 3 жыл бұрын

You're welcome!!

@larahourani9152 2 жыл бұрын

Tack för hjälpen 👍jag har fixat

@beauxpench 3 жыл бұрын

very useful🙏🏻❤️❤️thank you

@laurentnkunku4326 2 жыл бұрын

Thanks so much for the video it helped me alot

@SwissDeno 2 жыл бұрын

thank you very much, it was very helpful. greetings from Switzerland 🇨🇭

@crystlesybert7313 2 жыл бұрын

Excellent product!

@ET-hc5jm 3 жыл бұрын

とても参考になりました！

@quisysimms9710 4 жыл бұрын

Thank you my friend

@GiovanaSimmer 3 жыл бұрын

Oh, wow, those sliders used to come assembled already? That would have helped so much! Now they just send you eight separate sliders and dozens more screws... :(

@coorslite619 2 жыл бұрын

Yup had me confused

@jennyreyes1422 4 жыл бұрын

When I was putting in the back part of the dresser like at 7:24 it was folding in instead of staying straight on. Regardless of the folds it would bend in a little. Did I do something wrong or is that just how it is bc I see yours and it stayed on completely straight.

@abimcmaster8957 2 жыл бұрын

fantastico! much better than the manual that came with! thank you so very much from me and my husband!

@learnshare 2 жыл бұрын

You're welcome 👋

@redrichie1772 3 жыл бұрын

just got this desk this morning and had to assemble it myself when i got home.I had jumped from 2 other videos before finding this one and how glad i am that i kept searching and came across this gem. super simple guide and very quick. thanks alot for the video mate. :)

@learnshare 3 жыл бұрын

Glad I could help!

@iambobbysootsfrimindysoots9706 4 жыл бұрын

This is very difficult they make it look easy!

@farahabdi5016 2 жыл бұрын

Thanks bro this video helped me for the whole process and I did it less time

@kumalala6198 3 жыл бұрын

Thank you, the manual didn’t come so this helped a lot

@siljeevensen3895 3 жыл бұрын

If you would ever have that problem again, go on IKEA'a website and search up you item and you will find the manual!

@johnhimal5913 3 жыл бұрын

Great. Thank you so much

@brendatowa4076 4 жыл бұрын

Thanks for your help 👍

@learnshare 4 жыл бұрын

Always welcome

@purnimakamaraju7682 3 жыл бұрын

Hi, Thank you for this video very useful. I could assemble it yesterday.. but my whole piece is not stiff or strong.. somewhere it is loose though I tight the whole screws fully.. can anyone help how to fix this

@muhammadullah9664 3 жыл бұрын

Thank you for the nice video. It helped me to assemble mine quicker than I thought. :)

@vinnyd357 4 жыл бұрын

Very helpful!! After a friend put them together they have fallen apart - I now know why. Thanks!! 👊🏽

@freedus 4 жыл бұрын

Some closeups would have been good at certain spots. Good overall.

@marisainacio5437 3 жыл бұрын

He did try 🙄

@suzywtheuzi 2 жыл бұрын

was it not good enough? he tryed

@Nudibelle 4 жыл бұрын

11:53 HOW DO YOU GET IT TO STAY IN PLACE

@cw9097 4 жыл бұрын

What drill torque do you usually use when assembling ikea furnitures (since they are made out of cheap wood powder) 🤷🏽‍♂️. Thanks.

@kendricklamote Жыл бұрын

I never go more than 5

@Queen27.11 Жыл бұрын

Thank you sooo much! Your video was really helpful 😍 first time did it myself 🤧

@learnshare Жыл бұрын

You’re welcome 😊

@bigwill4978 4 жыл бұрын

I wouldn't recommend using a drill driver for Ikea assembly. Use a a screwdriver or an electric 4v screwdriver. There's no chance of you overdriving the screw and wrecking the panel. You also missed inserting some dowels when you assembled the frame.

@jakal1591 3 жыл бұрын

If you can adjust the torque, why not

@prabhkainth2820 2 жыл бұрын

Thanks alot this vedio helps me alot i assemble myself alone without any help. Really appreciate you for vedio.

@learnshare 2 жыл бұрын

Many thanks!!

@bigwill4978 4 жыл бұрын

You need to properly screw the front screw on the bottom of your drawer to ensure the bottoms are secure.

@AlexJackieTulloch 3 жыл бұрын

Thank you

@marianavilela1720 4 жыл бұрын

Very useful. Helped me a lot ☺ thank you

@learnshare 4 жыл бұрын

You're welcome 😊

@taniacarreira8343 Жыл бұрын

I was able to misunderstand the instructions and the video! 😂 props for me! But at least after misunderstanding the video, I was able to ruin the entire assembly with self-confidence! 👌 the ikea furniture teaches us humility, but first humiliates us! 😂😂

@AngelAiiima Жыл бұрын

Thank you 🙏 it was so helpful 😊

@learnshare Жыл бұрын

Glad it was helpful!

@chantonsensemble4941 3 жыл бұрын

Merci 🙏

@Necronite 3 жыл бұрын

Do u need the power drill to assemble it I don’t have one

@AdesholaAfolabi98 3 жыл бұрын

lovely video. recently moved and the back panel for my chest of drawers got very damaged. will I still be able to use the chest of drawers ?

@marcustulliuscicero9140 3 жыл бұрын

Just buy some cheap hardboard panels from the DIY shop for like £5

@Yagirlabzz Жыл бұрын

For this size drawer what size glass top would I go for to fit it perfectly

@sweetflower8 2 жыл бұрын

Thanks a lot

@kathyl9222 3 жыл бұрын

What would you use for the part where you need to add a hole to the backside of the drawers without a drill?

@JerryLiu8 2 жыл бұрын

I just used an electric screwdriver and the wood is soft enough for the screw to go in without any difficulty.

@KathyOdisse 4 жыл бұрын

I got this when it was on sale for $79 thank god 🙂

@kevinhunt7621 4 жыл бұрын

@selenadanae 4 жыл бұрын

When?? And how?

@adanmahamed4353 3 жыл бұрын

Am sexy for me love

@sarabear1238 Жыл бұрын

Wonderful

@learnshare Жыл бұрын

Thank you! Cheers!

@13Bazoka146 2 ай бұрын

thank you

@ruchikumari3256 Жыл бұрын

Thank you bro

@Missesflamboyant 11 ай бұрын

Bro cause they didn’t even send me the drawer instructions. I was struggling. Thank you

@learnshare 11 ай бұрын

Glad I could help

@ljarango1 Ай бұрын

Excelente

@davidsouthern5011 Жыл бұрын

How to to fit the runners on the Draws HAUGA CABINET please . Thank you

@frankmorgan9495 3 жыл бұрын

Just assembled one, checked this as I thought I had the cross pieces upside down (the bits inbetween the drawers) the underside of them is covered white so not sure why the exposed wooden bit goes at the top???

@learnshare 3 жыл бұрын

Yes, the smooth, white surface should be up, but even with the drawers in place, you won't notice the difference, so I left it as is.

@olam.3065 2 жыл бұрын

I put conversely the highest desk :( how to change it. how to turn on the plastic stuff ?

@Exitonefiftytwo 4 жыл бұрын

Great video! Do you happen to know the interior dimensions of the drawers? Thanks!

@karlapussy 3 жыл бұрын

tHAT'S WhAt tHe IKEA WEBSITE IS FOOOOOR!!!!

@dustinjavaherian9893 3 жыл бұрын

I can’t get the drawers in, you make it look so easy

@monserizo7338 4 жыл бұрын

Some parts of my malm dresser are grey even though i purchased the white dresser is that normal!!!??

@jiho5375 4 жыл бұрын

Monse Rizo mine has grey parts too so maybe??

@Maria-kb3nq 4 жыл бұрын

yep, the grey parts aren't visible on the exterior!

@monserizo7338 4 жыл бұрын

Maria omg thank you! Now that its built i realized that😂🙂

@Maria-kb3nq 4 жыл бұрын

@@monserizo7338 I thought the same thing and had a mini heart attack when I first opened mine lol :)

@NikeChris 3 жыл бұрын

is an electric drill / screwdriver necessary to assemble the product?

@alyssaleong9071 3 жыл бұрын

Someone reply this guy!! Is it necessary to use a drill??

@anisahkasim3305 3 жыл бұрын

It makes it easier for me. I’m 5’0” with no upper body strength. I have assembled previous units using manual screwdriver. My hands and arms hurt for a couple of days afterwards. Plus I did it by myself so it helps a lot because I had to hold parts steady as well.

@jorge1948mtp 3 жыл бұрын

@@alyssaleong9071 I didn't use one.

@clrtomsett123456 3 жыл бұрын

No, you need a drill if you want to attach it to the wall (which IKEA tells you to do and if you have children you really really should do) but for the actual assembly you just need hand screwdrivers

@iconnelly78 3 жыл бұрын

Two of the drawers don't slide all the way in. I've looked and looked, I just don't know I did wrong. Two go right in the middle two stop and don't close all the way. Any suggestions of what I should redo?

@lauraliiciia 2 жыл бұрын

Same problem! Did you find solutions?

@jhaniellejames2719 2 жыл бұрын

I also have the same problem. Any suggestions?

@tatianaa.vieiraa Жыл бұрын

Super ❤️❤️❤️

@glasgowgirl7280 2 жыл бұрын

Mine has been built and can’t open the bottom drawer - any advice??

@theutubeman1 2 жыл бұрын

I'm at the part where I'm trying to insert the drawers but they won't go in, I'm so frustrated! It's like it won't fit, any suggestions?

@just.miss.arianna 2 жыл бұрын

Do you know how much the drawers was?

@loudnessjr 2 жыл бұрын

How to unscrew that plastic cap?? I put it too early 😭😭

@lovefelix1566 3 жыл бұрын

Thank you but I maybe have an older set... my drawers have metal/iron underneath... funny thing i just bought it...

@melyn.3094 3 жыл бұрын

How long did it take you to assembly everything?

@learnshare 3 жыл бұрын

30 min 😅

@kencozen7782 4 жыл бұрын

Completed assembly and top drawer only opens a couple inches and cannot pull entire drawer out

@bigwill4978 4 жыл бұрын

You may have the wrong screws on the drawer slides or they're not fully screwed in which will catch on the sides stopping the drawer from sliding properly.

@ise73ifty 4 жыл бұрын

Quick question, when you put the 4 small front panels across the front, the piece between each drawer, is the unfinished side face up? I finished mine and then thought i put those in upside down

@intanizzaty9473 3 жыл бұрын

Looks easy peasyy but we'll see haha

@monaix301 4 жыл бұрын

Very helpful

@walisf 2 жыл бұрын

you are my god

@karandeepsingh7074 3 жыл бұрын

Im stuck on page 7. Can someone help?

@Sandroll19 2 жыл бұрын

Tengo una duda, antes de colocar la parte trasera, estaba muy como inestable, es normal?

@learnshare 2 жыл бұрын

Si. es.

@ambersoto3786 3 жыл бұрын

My draws won’t slide in at all , I’m super stressed

@simbarb 3 жыл бұрын

I was putting together a 3 drawer one of these while watching this and missed putting an extra board between the middle and bottom drawer. Strange the 3 drawer has it but the 4 drawer doesn't. Super helpful vid thanks.

@LuckyLemmons 2 жыл бұрын

Do you have to use an electric drill?

@learnshare 2 жыл бұрын

No, make use of a screw driver.

@bradymaldonado9204 8 ай бұрын

Does anyone know why it specifies that you can't put a television above it if it can be seen that it can handle it?

@RudolfGraspointner 3 жыл бұрын

How to open drawers when there is no handle/knob? Fingernails?

@anisahkasim3305 3 жыл бұрын

There’s an angled side at the bottom of each drawer. I find it better than knobs because knobs can work themselves loose.

@TheLillyana89 2 жыл бұрын

@@anisahkasim3305 you mean at the top of each drawer?

@walisf 2 жыл бұрын

You save me

@russmelton5684 4 жыл бұрын

Good video. It would have been helpful if you did a voiceover explaining what you were doing.

@donmortensen7518 3 жыл бұрын

Seems like the cross bars under the drawers in the front would have the smooth side up instead of the smooth side down.

@learnshare 3 жыл бұрын

Yes, you are correct, but even with the drawers in place you don't notice the difference, so I left it as is.

@chrisstaub5880 Жыл бұрын

No, the unfinished side should be happy pointing up. You usually won't see that side of each rail because it would be covered by the drawer above it. Besides, if you are strictly following the instructions and positioning them so that the cam lock holes are pointing inside, there's only one way they can go.