iKier K1 Pro Max 70W Laser Engraver & Enclosure

Рет қаралды 11,285

3 ай бұрын

In this video we're going to take a look at iKier's K1 Pro Max laser engraver and enclosure kit.
This machine is unique because it uses 14 6W laser diodes to generate the most powerful diode lasers available for deep cutting and fast engraving performance at speeds of up to 900mm/s with an accuracy of 0.01mm. It has a spot size of just 0.15x0.2mm at 70W, which can be reduced by 50% to 0.1x0.15mm for fine detail engraving by flipping the switch on the side of the module from 70W to 35W. Check out the video for more information, and if you're interested in getting one of these machines for yourself then check out the links below.
Use coupon code K70YT411 to get $200 off in the US and €180 off in Europe
Official ikier shop:
www.ikier.com/collections/mac...
The official ikier Europe shop:
eu.ikier.com/collections/mach...
RST website: www.resystech.com
Follow RST on Facebook:
/ renewablesystemstechno...

Пікірлер: 18

@jimginnyohio 3 ай бұрын

Wow! That looks simple and sweet! It looks like it has just about everything one would need!

@cutekidstories 3 ай бұрын

Cool seeing how the laser cutter can do different colors.

@PandorusFightStick 3 ай бұрын

have been looking at this machine since it was announced

@lalremruata7209 3 ай бұрын

Great!!👍

@LaszloBagi 3 ай бұрын

Looks great, build quality looks as good as my current Roly 10...... I need more speed

@wesplummer5588 Ай бұрын

is there clearance to use the rotary R1 kit with the enclosure?

@LeonardRadulescu-vk1fx Ай бұрын

Awesome . Have you tried to do a photo reproduction or carving or 3 d with this Ikier ? I'm wondering if i can do a good photo reproduction . Thanks

@Double-U-2 Ай бұрын

Unfortunately, the Y cable for connecting the LED and fan was missing from my case package. Does anyone have an idea how many volts the LEDs have? I also can't find the place where the door contacts are plugged in. Are there any experts here?

@mynameisZhenyaArt_ 2 ай бұрын

Hi! Is it possible to cut steel or brass with this machine?

@JamesBiggar 2 ай бұрын

No.

@1-Nice-Guy 3 ай бұрын

Can you autofocus for both cutting and engraving?

@JamesBiggar 3 ай бұрын

Forgot to mention, sorry. Only for engraving from what I could tell.

@1-Nice-Guy 3 ай бұрын

@@JamesBiggar thank!

@mirekandrassy2928 13 күн бұрын

Hello, can you cut a toolbox foam as well on this laser? EVA foam or XPE foam.. What would be a max thickness of the foam to cut through with nice cut quality? Thank you

@JamesBiggar 13 күн бұрын

I haven't tried foam with this machine to know exactly what thickness it can cut yet, but diode lasers like this can certainly cut (colored) foam cleanly. Generally, you'll need 1W of power for every mm of foam thickness.

@thomasbakerii6953 Ай бұрын

i am looking to get one but that is a lot of money i would like to see how well the frame and all that is built

@JamesBiggar Ай бұрын

Just showed you. Made with aluminum extrusions. Square, doesn't rack under normal use. More than strong enough. But it's not a cnc router, either. The only load a laser needs to withstand is its own weight.

@tjkoker 3 ай бұрын

Its not hard to design a box-addon that can incorporate an On/Off switch for the Evac Blower as well as a relay switch that picks up the Laser "on" signal to turn on the the Evac Blower. That would solve your issue. I already have a 108 watt CO2 laser or I'd pick this one up. Great video. Cheers!