What makes this so satisfying is the electronic skill set you have. Most of us could do the tool restoration to varying degrees. But not many, myself included, have the ability to build a rechargeable battery from scratch. Very impressive.

Masterfully done. I'm a pretty good DIY guy, but I don't have the skillset to build a battery pack from scratch. Your knowledge of restoration and electronics is impressive.

“Ugh dad, wouldn’t you just finally let it go?! We were all pumped to get the new DCF903, but you never let us be cool” 😭

You are a master at your skill. What a amazing data base of knowledge you have of these tools.

Plot twist. He gets a brand new one for Father's Day.

Hi, this kind of excellence is outstanding and very hard to find, this was done with pride and confidence and it works like new, very impressive video keep up your excellent quality work, ty, Bob,

Excellent work restoring these old tools is a worthwhile use of your time and effort.

I had that exact same one up until a couple years ago when I sold it but it was still running fine. Was a great impact drill.

Only robust tools, huh! Not a single broken tooth! 💪

Funny, I just came in from my backyard shop where I was refurbishing a DeWalt D28402 angle grinder. Everything seems pretty good with it so far, but I ordered two new brushes for it. And this video pops up for me to watch. Amazing what you can do with what looks like total junk if you are willing to clean such power tools up... Thumbs Up!

Excellent video, you made it look easy ! great photography too and was a pleasure to watch..kudos to you

You got it working really well and looking like new. Great work.

Thumbs up for your work! Using that tyre repair glue is a verry handy find

That is incredible. Well done mate. 👍

Repair and restoration , nice job.

Man! My power tools never come with a free snack! 😞 Another great video. Thanks!

You brought it back to life again.

Takes a lot to impress me. You sir are a wizard. Excellent work

Great job, given what these tools cost, he did well to repair it. The DeWalt DCF899 P2 model purchased new I paid for over 500 €

Great job! Very nicely done.

This is wonderful, no doubt, we lack a lot of things to reach this creativity, thank you ❤

You did a very good job, keep it up. Beautiful result 💪👍

Wonderful restoration very good job

Interesting project and great job buddy👍

Excelente Trabajo, te felicito. Gracias por Compartir. Saludos desde Venezuela!!!

Great work on the restoration of the unit ( the 18650 part was a great idea I’m out here away to restore my old dewalt batteries now 😁✌️

I recently bought a DeWalt impact, totally forgot to insert the bug, thank you for reminding 👍🏻

You should collaborate with torque test channel to see how these restorations stand up :)

Muy buen video, excelente trabajo... Saludos

Молодец, хорошая работа, но гайки все таки вручную надежнее закручивать на колесе! Доверие внушает .))))

Espectacular, un trabajo excelente.

That's some great content and production value. That kit looks great.

Great work 👍

good job, very inspirating!

잘봤습니다. Good job 👍👍👍

Uh oh...you forgot to reinsert the worm!! 🙂. Great job!

Muy buen trabajo!!!

Amigo excelente proyecto

Awesome result.

Молодец! Красота!

Very nice job.

Great video good display of fixing instead of throwing away!!

Well done.

Nicely done, thank's for sharing :-)

You should make the Ni battery shell to an adapter, to suit new battery, so make your tools range bigger

This was so relaxing

Excellent.....great job

That’s a smart ass idea putting bearing grease on top of the bearing then just heat it up. You can do that with bearing you cant remove the cover on.

Puts a DeWalt drill back together with a Makita drill.. now that’s a fucking Thug Life right there

Great work

Trabalho excelente! Por favor, qual o Software você utiliza para fazer as etiquetas, adesivos ou identificação?

Good job 👍

More impressed by the batteries honestly

Nice job

Не понимаю, как так можно обращаться с инструментом, чтобы довести его до такого плачевного состояния? Мастеру моё почтение и лайк за видео!

Woow ese modelo apenas va a llegar a LATAM y tú estás restaurando uno viejo 😂

Show parabéns.

Is there any way to use SDS drill bit chuck into 1/2" impact wrench?

Can still use the charger system that you just put the battery drop in? Or do you have to charge the battery like you did?

Thats pretty bad ass tho🤌🏽👌🏽

Excellent work 🧡

Great restoration. So much work for no chance of recouping money. Makes for a fun vid though.

Curious how the yellow paint on the plastic held up. Seems a cleaner better restore would be ~$25 new clamshells. Also a better idea to modernize by getting 18v tool to 20vMax battery adapter rather than battery and charger bastardization. But I get it, for the sake of it for the video. Just not practical for future use. Plus what did that give you a 3ah battery when an adapter will leave you way more options. Cool ideas though. Nice resto work.

Ultrasonic wave can be used for cleaning

Awesome Restoration. What color silver did you use for the front?

Great job sir, but why build a battery? Wouldnt it operate better with the stock battery?

Beautiful work! You should hit up the guys over at torque test channel and see if they’ll give it a few runs on their rig. I’m sure you’d get a shout out on their video if the decided to do it.

Did you use plastic primer? Because without it the paint will come off in no time. And put more grease into the gears.

This reminds me of when hank hill used a small can of wd40 to fix his big can of wd40.

Excellent work 👍 ….what’s that rubber glue you used to repair the rubber with? Subscribed 🍻

Very nice

What you are doing a great job, but if you polish the cores, then the lamination is being destroyed, which is there to stop reduce eddy current, will affect the efficiency, eventually will affect the windings also

GOOD SKILL ...

This is awesome

Very good

What kind of grease you used?

Where did you get new decals?

Very nice!

Excilent !

Dewalt tools are nothing like the old ones. They used to last forever, now you can't even get a year out of them! I've started using matabo. So far they have been bullet proof.

Muito bom!

What kind of grease do you use?? Water grease??

São poucos vídeos que tenho paciência de assistir.

What was that spray he used?

it's great!

Nice job! Should of bought a new clamshell off eBay, would of made it look brand new!! Where did you get the new sticker labels?

Çok güzel oldu. marka etiketini nasıl yazdırıyorsunuz

I restored my DeWalt at Home Depot in under 5 minutes.

Awesome

so cool...

Couldn’t you have got that done under dewalt warranty? Just joking! Great job.

💪👁excelente...

Asmr the best

0:36 В нём теплится жизнь!

Man I can smell the brake leaner thru the phone

Cool!!!!

Hi where do you purchase replacement parts please

Thes real question is where do you even find these kinds of things in a bad condition

Excellent Work !!! Congratulations

Needed more grease in all the bearings and stuff, but cool vid