Florida man, armed with a Rhodesian hat, prepares for combat with alligators.

Nice job. My only suggestion would be, since you had the hub apart, you should have pulled the spindle out and inspect the bearings and seals. If you're going to go that far, might as well go all the way.

I don't even own a humvee and I watched this. Good times Dakota!

Don't bother with replacing the spindle nuts with the stock lock/star nuts. They're prone to failure even when new. Get the "BlueHummer" locking spindle nuts from ModMafia and never have to replace them again. It's the 1st upgrade to make to the truck without a doubt.

One recommendation, after torquing the nut to 40 lb-ft, and rotating the wheel forwards, and backwards, put the socket and torque wrench back on and without loosening, tighten to 40 again and note if the socket/nut moved, if it did, repeat, if it did not, loosen and re-torque to 25.

Fantastic video. Great detail on all the important parts of the process. THanks for taking the time to put this together!

Dakota: Thanks for the detailed video on how to inspect and service the spindle nut. Getting ready to replace the output spindle seal on my H1 this afternoon.

My h1 wheel fell off 20 years ago 15 min after I just purchased it......great advice! Cost me about 3k to have fixed

Thanks Dakota! Well done! I’m still enjoying my hmmwv!

Думал у хамви спереди поворотные кулаки стоят, а тут оказывается полноценный бортовой редуктор 😀👍

Great video! I'm waiting for parts to get this job done, this is a confidence building video.

Nice job Dakota, your very thorough, no bullshit maintenance videos,extra piece of raisin pie for you

Thanks Dakota... awesome video like always

Great job! Say hi to the family

Awesome work!!

Thanks DW!

Great video... Very nice 😊👍

Hi, Dakota wood, I am French and I would have liked to have the hub torque tightening because I do not speak English. Please. Thank you for your answer and continue it's great!

Thanks

Great Video

안녕하셔요🤗 세심히 꼼꼼하게 예방정비를 잘 하시는군요 🍒 유익한 좋은 영상 소식 감사 드립니다.🌿 Good Job ♡♡♡ S Korea~~~

Hallo Dakota, Thank you very much for your *Instructions - did learn a lot, the Hmmwv - is another Dimension, in case of my old M1009-35-years-old-stuka-of-wheels. did follow your videos, collecting experiences others, preparing - I guess next car will be M998, surplus. Unfortenately no Humvee -surplus sales in Germany (most are given as mil.-aid/help = especially to Ukraine +- 600 ea;) Dekades back, I had had various suvs, best of All - US-Mil.-Vehicles.= -did start w/M38A1, as i have been in your age. until today, for my land- manor no better car as an US-Mil-vehicle. May I wish you health and luck, and would be nice - seeing more of your *Lectures..

Hi Kumpel, tolles verständliches Video :-) Tolle Arbeit Dakota ;-)Hi buddy, great understandable video :-) Great job Dakota ;-)

Can you make a video on how to replace rear brake pads and calipers on 1989 M998? Thanks

Thanks for all the great content you post. I am trying to buy one off auction. A few questions; - looks like most the fasteners are imperial? Or is it a mix? - how long after auction win do you actually get the truck? - any suggestions on noise reduction? Thanks

Congratulations for The video. Another question. What is the maximum temperature indicated by the coolant needle that you have ever reached under effort? Have you ever touched the line/notch next to the middle when overexerting yourself? Thank you

What silicone or gasket maker do you recommend for the cover?

Hi friend. I would like to explain better what I did today. the 2 radiators placed in the upper part have been completely disassembled and worked to have them restored. one if I'm not mistaken is that of air conditioning and the other that of engine and transmission oil. As for the latter, first of all, I have a question for you. 1) Should the gear oil level be checked with the dipstick when the engine is running and when it is hot? 2) after draining the coolant from the drain valve, I added 17 liters. How many liters do you need? 3) today I dedicate myself to the level of the engine coolant. I filled the tank to maximum and turned on the h1 from a standstill by turning the main and auxiliary fan to maximum by moving the heater knob completely hot and waiting for the engine to reach normal operating temperature. the car remained stationary during this operation with the engine running without driving. When the engine reached normal operating temperature, I unscrewed the screw of the 2 air bleeds but not a lot of air came out and no coolant came out. because? I'm asking you this because I don't want to cause engine damage and burn the cylinder head gasket. thanks friend . Kings regards Gianfranco

Where did you got that spindle nut kit sir ? All three ?

Does that humvee have lighter springs? If so, how do you like them?

What made you decide to change the spindle nut? I have one with 29K on it should I do the same?

why not use thread tape on those fittings? seems that would provide for easier maintenance down the road...

what is that hose for?

Where did you get the parts for this project? Is there a vendor that you would recommend?

When I was in the army I was in the motor pool and a Hmmwv was being pulled in ask what happened they told me it went into the ditch after loosing the tire say the spindle nut was not put in properly

Brother I need see how change injections pump if u have video plz send to me

Al tener un engranaje intermedio el palier gira al revés .

does it use gas?

I own a M998 .. and im trying to find a good place to order parts. Like.. Front left Axle the boot is tore. also looking to the 4 door canopy cover. thats not going to cost me my first child..

When rolling my M998 on a slight down hill with foot off accelerator and brake I hear a squeak every revolution of the wheels. Have any ideas what that could be?

Was there no gasket for the spindle nut cover? Feels like there's meant to be a gasket there, unless it didn't come factory standard.

I am looking for suppliers for parts of military vehicles such as HMMWV M113 or BMY, if anyone has information I would greatly appreciate it!

Where did you get your Humvee from, how much was it, do you think it was worth it, can you pick up girls in it, can it be a main car?

Would you consider building a HMMWV for me? Do you have any for sale?

Dakota I have picked up a lot of information from your videos. I would like text you, email you, or call you. My name is Scott Waldenfels you can find me in Facebook so we could communicate that way if you would like. I hope you respond Thank you, Scott

Hey all. Quick question about the CV Shaft retaining bolt. Say, (worst case scenario), my screw came undone and walked itself out of the shaft. How can I fish the bolt out of the hub? I'm at a loss. Any help is greatly appreciated 🙏.