The moving and centring part was especially my problem for trying to position an imported svg sketch into a model to extrude probably. What I had to do previously is "manually" move it, which made me very frustrated cause it wasn't symmetrical the more you zoom and caused me a terrible OCD... but no more, I now know how to center by a point and I love you for all the tips you've shown. Thank you!

I would love to see a video on joints and how you put this together very well done

Thank you! This is exactly what I was looking for and to the exact degree I needed to understand how to move forward with my project. There is art and then there is precision and functionality. Fusion 360 is the place in my mind to make any modifications as to dimensional precision prior to 3D printing. Unfixing an imported SVG is what was killing me. I must say, I really appreciate your methods from production to presentation to dialog, the whole package. There are a lot of people on You Tube who either gloss over the things we need to learn or who really don't know what they are talking about. You are a great example of how the process of information exchange should best take place. I really appreciated this tutorial, subscribed and am looking forward to notifications on your future videos. Thank you.

Your channel is a never ending library of amazing creation and tutorial.

1st video I've see by you, and I'm immediately hooked. Very well done walk through. you've won me as a subscriber.

my way of scaling svg is that: first i create sketch with the dimensions i want, make it construction lines. then, when i import the svg i can scale it directly from the import menu.

Great video tutorial as usual! I would love to see a video on joints and how you put this together.

Thanks for the tip on "fin/unfix" constraint, somehow I've been moving my sketches caveman style but this is exactly what I needed. ❤

That was awesome. Much gratitude Vlad 🙏 Planning on practicing with all your videos

That’s a great in-depth SVG tutorial. Thanks

To fix the scale issue from inkscape open inkscape then go File Document properties Find the format drop down that more than likely says "mm" and change it to px Go down to scale and change that number to 1.0 Go back to format drop down and change it back to "mm" Close the properties window then export the file. Now when you import to fusion it will scale correctly. Basically inkscapes px scale is off and fusion bases scale off px scale. So when you export from inkscape it was scaling by whatever that px scale number was you changed to 1.

Have you ever tried using .DXF files instead of .svg? In AI instead of save as, go to export and then choose DXF when it ask for the scale make sure it says 1 mm to 1mm. Then in Fusion choose the import DXF from the import menu, just under import svg. This will import the file as a drawing as well and will scale it exactly to the size it was in AI. If your AI file has multiple layers fusion will also allow you to import the layers as different sketches, as one sketch or select layers only. I found using DXF files is a bit more functional than svg.

Great video. Useful skill. Mahalo for sharing! 🙂🐒

This was extremely helpful. I'm making outdoor patterned steel lamp shades using SVGs and we struggled a lot working with them. Should have watched this first, would have saved us hours of fussing. Thanks.

thank you. very helpful

Thanks a lot!

Hi Vladimir, I am taking your class in Udemy and I really enjoying it. You are truly an exceptional instructor. I am in the process of buying a 3D printer for my self. Do you have any recommendation? I see Ender is quite popular, but I want to buy something a little bit more professional.

You saved a lot of time

Hi, instead of svg inserting... try dxf file, it is much better way you don't need to calculate anything in will insert with exact dimension...but i don't know all programs have dxf export option.

Hi Vladamir. Any idea what might cause an SVG to import into Fusion 360 without any faces to extrude? Does grouping or compound paths in Illustrator play a part? My sketch is basically a square with LOTS of holes in it. Thanks! I'm gonna go check out your other videos now.

Any tricks to get smooth curves from an Imported svg? I don't have too many points but I'd love to know if there is a way to not manually re-trace it with spline. I have been trying to place a chamfer on a logo that has sharp corners (inside corners) that fusion cant handle and having to deal with less points would help a lot.

I’m not sure if it’s just my experience, but whenever I insert an svg, before I click okay I change the scale from 1.0 to 1.33333333(a whole load of 3) because it’s always 25% smaller for me. No need to think about it, just the same scale every time and it’s always worked out 😊

Followed your Scaling options. Excellent. I have Fusion 360 - 2024 version. Are there any changes? Thanks, Vince

In watching your video “Importing SVG Designs into Fusion 360” you asked if anyone knew how to import an SVG without having to scale it. I haven’t used Illustrator for years because it too expensive for me to justified its use. I use Affinity Designer and my SVG files always needed to be scaled, but I have found that in setting up a new document you can specify the size of the document and also the DPI. In my trials, I specified a new document at 72 DPI and when I export the document to SVG and then insert the SVG into Fusion 360, the SVG is inserted at 75% of the original document size. When I specify a document at 96 DPI in Affinity Designer and export it as an SVG, the inserted SVG in Fusion 360 is 100% of the original size-no scaling necessary. I don't know if Illustrator can specify the DPI of document but if it can it might be worth trying.

I use SVG quite a bit in my Fusion 360 designs. I find it easier to just do most of the design in Inkscape. Scaling! That seems to be an issue with everyone no matter what software you use. I did find a simple solution to this. Fusion 360 does not have the capability of scaling an imported SVG to exact dimensions. You can only do proportional scaling during the import. This is a work around. Simply import the SVG. Unfix it. Then use the dimensional tool to specify height, width or even a single element. Everything will rescale proportionally to that dimension. There is a limit to this technique until the sketch breaks. Note: You must have "Scale entire sketch at first dimension" enabled in design preferences. If you have an already dimensioned sketch that you want to import the SVG then create a new sketch on the same plane. Import the SVG. Dimension it to scale it. Copy the profile. Simply paste it to the targeted sketch. Then you can disable the preference. I have a short video on this.

Would love to see a video on joints

Curious how you would center an SVG that doesn't;t have a clear center point or isn't symmetrical. Otherwise video was great, thanks!

Nice

I figured out a way to scale in Inkscape. When I brought the SVG into Fusion, it was scaled correctly!

Fusion 360 treats an illustrator art board’s upper left corner as origin. If you move your artwork to that point before importing you can save a step.

Scaling issues: I’m pretty sure it has something to do with the pixel ‘resolution’ of the SVG file. Created in illustrator the SVG would have a default pixel resolution of 72 pixels per inch. Fusion 360 assumes that it is 96 pixels per inch - this used to be very frustrating as a web designer before standards were set :-)

To solve this size problem just import vectors from DXF.

Could you please share the file? It’d be really helpful.

what makes my svg import not being selectable? All I can do is extrude it, when I try to move or scale it, it is not selectable anymore

Just use "280/209.89" in scale instead of "1.33472"

hi