This is a brilliant updates and very thorough explanation. Thank you for your hard work
@retrodudefpv Жыл бұрын
Do you have any links or info on doing the dual steam switch mod? Thank you 🙂
@BREWBETTER Жыл бұрын
Hi, Any twin switch could be used in the same form factor, the installation is a straight swap. I am happy to supply you with one including installation guide. If you are interested please get in touch via email on the address noted in the description. Kind regards Peter
@Nickporter172 жыл бұрын
This is so clean! The led and extra temp control is amazing! I'm wondering how you managed to separate the steam team and solenoid valve?
@BREWBETTER2 жыл бұрын
Thank you. These functions normally controlled by the same switch (steam function switch), so the twin switch separates these functions.
@Nickporter172 жыл бұрын
@@BREWBETTER ahh cool!
@vialb22 жыл бұрын
This is sweet! Quick question... With the box on top, can you still fill up the tank from the funnel from the top? Or is it removed and you fill up by removing the tank?
@BREWBETTER2 жыл бұрын
Thank you. Very good question. Yes, there is a food grade silicone hose in the kit to extend the length of the funnel, so it is as easy to refill as originally.
@spike4432 жыл бұрын
Interesting. In this example, the PID is really acting as just a thermometer, and you're doing full manual control of the temp, right?
@BREWBETTER2 жыл бұрын
Yes, correct. The PID is there as a backup if I am lazy, or another family member uses the machine.
@FabrizioFortunatoFortune2 жыл бұрын
Hey thanks for the video, I'm still learning on the gaggia but Wouldn't the PID provide the stability already why doing intrashot temp surfing?
@BREWBETTER2 жыл бұрын
Hi, the PID will only be accurate to a certain point. Throughout a standard double shot it usually drops around 4-5°C. Checkout my older videos on temperature management. With intrashot temp surfing you are not only able to compensate for that, but temperature profiling is also achievable.
@d4rk_entityy Жыл бұрын
Hi peter, when can i buy those dual channel switch, do u have link to aliexpress thanks bro
@BREWBETTER Жыл бұрын
Hi, Most which I tried from Ali was slightly undersized, so the switch did move up and down it is loose. Drop me an email
@rob_l Жыл бұрын
the boost box do you have the 3d files or do you know where I can get it
@melvinchoi57682 жыл бұрын
May I know what parts you use to adjust the pressure ?
@BREWBETTER2 жыл бұрын
Hi, I use a simple 2kW DC motor controller dimmer (triac circuit) and a 3.3kOhm power resistor hooked parallel to the pump.