#480

  Рет қаралды 210,057

IMSAI Guy

IMSAI Guy

Күн бұрын

Episode 480
I lead you through a simple calibration and SWR measurement.
I have 25 videos on the NANOVNA: • #365a NANOVNA resistan...
Buy original: www.banggood.com/custlink/3Kv...
Recommended 4" screen: www.banggood.com/custlink/K3G...
Be a Patron:
/ imsaiguy

Пікірлер: 598
@spidermoose
@spidermoose 2 ай бұрын
"Don't worry about this, just ignore that, skip all of those options and just click here ..." I love this video. Thank you so much for an explanation so I can do something without studying rocket science first! 🙏
@Forestriveroutfitter
@Forestriveroutfitter 4 ай бұрын
I had watched several videos trying to figure out how to get started. This is quite simply the best explanation I've found.
@paulmiller4419
@paulmiller4419 6 күн бұрын
One of the best NanoVNA tutorials on KZfaq.😎
@chrisroddick3899
@chrisroddick3899 3 жыл бұрын
Thank you for such a clear tutorial without all the useless babble others seem to enjoy spewing out ! Have been holding off on one of these but now placing an order.
@rkaag99
@rkaag99 3 жыл бұрын
I'm in my 50's and have had many instructors on various topics over the years. You have done a great presentation! I'm looking forward to diving into your other videos. Thank you!
@IMSAIGuy
@IMSAIGuy 3 жыл бұрын
Thanks for the kind words
@PowderMill
@PowderMill 3 жыл бұрын
You are a spring chicken.... wait until you hit the BIG 59!, 😉😷😆 The IMSAI GUY is hands-down ->>. The BEST instructor on RF topics I have ever had the pleasure of watching. Fortunately, the CCP launched a bio-weapon attack on the world... the following DemonCrat Lock-Downs have enabled us to have a tremendous amount of spare time to Binge Watch KZfaq videos. 😣🇺🇸
@John_Henry83
@John_Henry83 Жыл бұрын
I TOTALLY AGREE. I would have given this TWO likes if that were possible.
@StreakyP
@StreakyP 3 жыл бұрын
Superb tutorial. Many Thanks. The only point I'd add is I'd never connect my antenna adaptor/co-ax directly to the unit's SMA as it is way too fragile. Always use the short SMA to SMA tail onto the VNA and connect your antenna adaptor to the other end of the tail. Things last much longer this way.
@robertlundstrom8061
@robertlundstrom8061 3 жыл бұрын
As a 70 yr old, your video was exceptionally well made with very clear instructions even for an old guy. Well done! I look forward to your other videos.
@dennis8019
@dennis8019 3 жыл бұрын
u saved my nano,s life ... i was so close to trowing it to the floor lol. thank u so much.....
@Troyster94806
@Troyster94806 3 жыл бұрын
This is the best video I've found in terms of cutting to the chase, and simply explaining how to use the device to do what the vast majority of people will want to use it for. One video I watched a guy spent half the video blabbing and the second half showing but not explaining. It was a waste of my life to watch it.
@darylcheshire1618
@darylcheshire1618 29 күн бұрын
A lot of youtubers waffle to pad out the video and don’t get to the point.
@SimonTemplarVK3XEM
@SimonTemplarVK3XEM 4 жыл бұрын
Thank you, finally I can see a reason to buy a NanoVNA.
@Alfa011
@Alfa011 7 ай бұрын
Just great! Loved it. Finally someone that explains it in a manner that can be fully and easily understood! Thank you!!!
@johnpentland
@johnpentland 2 ай бұрын
I bought a Nano VNA purely to tune a HF antenna. It didn't come with any instructions and was impossible to use without any prior knowledge of the device. I had no idea it had to be calibrated or what the "open", "short" and "load" connectors were. I watched several videos but most did not explain clearly how to use it, and none explained whhich connectors were open, short and load. This video is by far the best and explained how to calibrate and use the device. I have now learned how to use my device to tune my antenna. (I had to buy a SO239 to SMA adapter.) Thank you for this excellent video! Without it I would have never used the Nano VNA and would have ended up spending many times more on a Rig Expert which is not really necessary as I only occasionally need to use a device like this, so the cheap Nano vna suits me fine. THANKS AGAIN!
@mauriceaustin3442
@mauriceaustin3442 3 жыл бұрын
Thank you. Straight to the point with no fluff. Just what I was looking for.
@XXXJAB
@XXXJAB Жыл бұрын
I just got my Nano VNA today and so pleased that I randomly opened this video within the first 5 minutes of researching how to use the device. I’m feeling confident I can operate the device for checking antenna SWR. Thankyou
@marcin_bruczkowski
@marcin_bruczkowski 3 жыл бұрын
You are a FANTASTIC teacher. Just received my NanoVNA H and after attempting to understand the manual was about to send it back... THANK YOU :)
@paulcooper4624
@paulcooper4624 10 ай бұрын
I'm in my 60's and new to Amateur Radio. You've made what looks like a scarily scientific bit of kit, understandable, even to me. If you're not in a teaching profession, then students in your country are missing out. Subscribed.
@19levante82
@19levante82 3 жыл бұрын
As others have said, this is the clearest step by step demonstration anywhere on KZfaq. Although I muddled my way through the others in a hit and miss fashion, eventually getting it to do what I wanted, I always felt that I may have done something wrong. Now with this, I can get things right first time. Thank you
@IMSAIGuy
@IMSAIGuy 3 жыл бұрын
thanks
@seanwalczak2532
@seanwalczak2532 2 жыл бұрын
This video was exactly what I was looking for to help guide me through measuring a homebrew antenna's SWR . Thank you!
@markmelchiori511
@markmelchiori511 3 жыл бұрын
Extremely informative and well narrated video! Thank you for your time and effort to share this information!
@harveyhopper7561
@harveyhopper7561 3 жыл бұрын
Straight and to the point. I love this instructional video. This helped me do exactly what I bought the NANOVNA for to start with. I will definitely look at your other videos as I progress in my learning. Thanks!!
@aldcwatson
@aldcwatson 3 жыл бұрын
I needed to trim a 20m dipole for digital modes. This no-fuss video was tremendously helpful for setting up my NanoVNA to help perform this task. Thank you!!
@M-Series-guy
@M-Series-guy 4 ай бұрын
I tested two antennas within 1 hour of opening the box. This video hits the mark! Made a complicated device and made it simple. THANK YOU for keeping it real!
@IMSAIGuy
@IMSAIGuy 4 ай бұрын
Glad it helped!
@mikeskehan8926
@mikeskehan8926 2 жыл бұрын
Pro Grade presentation with superb video to follow on. Thank You for getting this old-timer up and running.
@gr33nshoes
@gr33nshoes 2 жыл бұрын
Wow. I've been building and experimenting with antennas all my life and just got ordered of these. This is one of the most comprehensive tutorial on these.
@johndawid8059
@johndawid8059 3 жыл бұрын
Add my thanks to the others here for an excellent video on getting started with the Nano VNA! This is primarily what I bought mine for, to check my homebrew antenna SWR. Your video is concise, to the point, and at the right speed where I was able to follow along. Great job sir!
@sfrahm1
@sfrahm1 Жыл бұрын
Yes! A GREAT beginners how to use a NanoVNA! Looking forward to watching your very simple yet thorough enough style of explanation of more complex topics as well. I've been doing this kinda stuff for 50+ years myself & your cut to the chase attitude is very refreshing & most welcome.Thank You!
@kleetus88
@kleetus88 2 жыл бұрын
great job on this video, you are a very patient person to be able to teach the basics like you do.
@DanLeonardpb
@DanLeonardpb Жыл бұрын
This is the third 'how to setup your nanovna video' I've watched. I was able to look at my antenna on multiple frequencies before you were even done. Thank you so much for an easy to understand video to get me going, and especially thanks for the show and tell on the SMA connectors. Great video!
@DirtyPlumbus
@DirtyPlumbus Жыл бұрын
I've watched a number of videos on the Nano VNA. Yours is by far the best. You hit on many key details others miss, such as saving calibration and rescaling, with great detail into what people need to know while skipping more advanced information that would just complicate things for beginners. Thank you.
@jamiecook5066
@jamiecook5066 3 жыл бұрын
Best tutorial I have found to use the nanovna for SWR!!! That is what I bought it for!! Thanks!!!
@dr2man
@dr2man 3 жыл бұрын
What a great presentation, I've learned precisely what I needed to know about the VNA, your explanation in this video was the best video I have seen on this topic. Thanks!
@tomstrum6259
@tomstrum6259 3 жыл бұрын
Thx greatly !! You got me up & running making perfect SWR measurements !! The best user help & explanation video ever. Plz keep them coming !
@rts3262
@rts3262 8 ай бұрын
The BEST instruction video for the Nano VNA. If you are not currently a professional instructor, do it...do it now!!
@IMSAIGuy
@IMSAIGuy 8 ай бұрын
I'm a KZfaq instructor, I get paid with ads and donations. Feel free to subscribe and be a Patron.
@alaskastinson
@alaskastinson 3 жыл бұрын
Thanks! It was a little overwhelming when I first fired it up. This is awesome! Appreciate you taking the time to do this!
@ramjet4025
@ramjet4025 2 жыл бұрын
Thank you for taking the time to make this video. Most of the NanoVNA-F videos are a fire hydrant of information. Yours was still a fire hydrant but at a lower pressure. It did however get me into the menu and I starting making my own manual. I found writing out the steps is a good way of learning the muscel memory required to get that foundation knowledge. I love my NanoVNA-F
@ColeDedhand
@ColeDedhand Жыл бұрын
It's much better to set your cal range to the range you actually want to use for a specific antenna. Maybe a little broader if you're trying to tune the antenna so you can see how well centered you are. You save no time to cal super wide and then zoom in. Also, if you're going to just click through the isolation and thru cals (which is fine) then you need to pause for a couple of seconds at each button push to let the instrument run the routine. If you click too fast it will result in a bad cal. I know this from experience.
@eliacimcortes8810
@eliacimcortes8810 3 жыл бұрын
Excellent video. I am a EE, but have been years away from this. This is very helpful. Thanks!
@ClarkTelecom
@ClarkTelecom 2 жыл бұрын
Super easy presentation, many thanks. I was overwhelmed when I first saw the screen. Now I can go and check my antennas as you made it so easy!
@matthewshank73
@matthewshank73 3 жыл бұрын
THANK YOU! Exactly what I have been searching for. Simple step by step to tweak a couple of wire antennas. Subscribed.
@henlij
@henlij 3 жыл бұрын
Just discovered your channel. You must be a teacher. Awesome explanation, making no assumptions that your audience knows much at all. +1 sub. Cheers
@MauriatOttolink
@MauriatOttolink 3 жыл бұрын
henlij You gottit.. In the computer world that quality is rare. They know stuff inside out but not a clue how to teach. I'm a musician and took up teaching. My training for it told me..."if you want to know how a beginner feels, change round your hands on the instrument...That's how they feel! This guy's good,
@Andy71
@Andy71 2 жыл бұрын
Can't thank you enough for this video which got me up and running and able to test my two antennas which is all I needed for now, will go onto the more advanced stuff in time :)
@skaramicke
@skaramicke 3 жыл бұрын
This video is almost insultingly easy to follow and I love it! You are extremely pedagogical. Great work! And I’m buying a nanovna in part because of this video.
@mikeramsey9747
@mikeramsey9747 2 жыл бұрын
Definitely my hat is off for how well you explained how to measure SWR (VHF/UHF) of my antenna using my new NanoVNA, I'm going to hopefully find more of your videos to explain some of the other functions. The key for me is remembering everything you taught.
@hectorpascal
@hectorpascal 3 жыл бұрын
CAUTION! Never screw the load CAL connector too tight. Too much force can break the connection between the inner pin and its 50 ohm load resistor. Slightly more than finger tight is all you need. (Professionals often use a torque wrench set to 3-5 in·lbf (0.3 to 0.6 N·m) ; but finger tight + a little is fine!)
@neubert500
@neubert500 3 жыл бұрын
Clear, concise, and excellent instruction! Thank you Sir!
@matteng2332
@matteng2332 3 ай бұрын
I just got mine today and this video was the best I’ve seen so far. Thank you and 73.
@smoberdeen
@smoberdeen 3 жыл бұрын
This is the by far the BEST video I've seen for the NanoVNA thus far. All I wanted to do is check SWR for my home brew antenna.
@donpreisler322
@donpreisler322 2 жыл бұрын
All I need the NanoVNA for is SWR (at least for starters). You took all the mystery out of it. Thank you. I've been building my own antennas and after watching your video, I'm good to go.
@berkanoid
@berkanoid 3 жыл бұрын
Thank you for giving me the confidence to order this neat little gadget!!
@herbertremer7270
@herbertremer7270 Жыл бұрын
Excellent I had watched a number of videos on the Nano VNA. All were either difficult or overly complicated. This presentation was clear and to the point. Thank you so much.
@gregorydobson4307
@gregorydobson4307 2 жыл бұрын
Best explanation I have found for swr on an antenna, THANKYOU.
@MrMeasureTwice
@MrMeasureTwice 3 жыл бұрын
Nice work on this video. A friend of mine loaned me his VNA - after 6 videos, I was done with it, but then... I found your video. Hooray! Thanks for boiling it down for VNA newbies!!
@rodgebrown7996
@rodgebrown7996 2 жыл бұрын
Great introduction to the Nano VNA, just what I have been looking for. I'm a complete newbie not just to the Nano VNA but radio as a whole. My present interest is chasing weather balloons with my grandkids and antenna matching seems to be an important subject. Although not a stranger to diy electronics I was getting lost with how complicated some videos seemed to make using the Nano VNA. I have followed your instructions with ease and getting useful results. Thank you for this KZfaq tutorial.
@handyman7147
@handyman7147 2 жыл бұрын
Short, simple and straightforward. Very good 👍
@dwalshaw
@dwalshaw 3 жыл бұрын
Well done, a very informative and very simple instructional video to follow, the best I have seen
@lenny0272
@lenny0272 3 жыл бұрын
best video ever...I got one for swr purposes only and you nailed it...Thank you triple thumbs up...
@electro9480
@electro9480 2 жыл бұрын
A brilliant video for SWR on this very clever piece of gear, great thanks.
@theyareouttogetme1
@theyareouttogetme1 Жыл бұрын
Thanks for this great video. Saved a lot of time checking the VSWR on my antenna.
@merlinsdad333
@merlinsdad333 2 жыл бұрын
Excellent talk through ,thank you for making time to do this
@metalfabman5477
@metalfabman5477 2 жыл бұрын
Excellant tutorial for us ham's chasing home brew antenna swr's, very strait foreword and to the point. Thanks, I can learn the other features as I go on. Mine came today, can't wait to use it on my home brew buddies stick, and base coil vertical next week.
@qrphfradio7753
@qrphfradio7753 2 жыл бұрын
A massive thank you for your excellent tutorial on the Nova VNA..On watching your instructions I went ahead and bought one, and it works very well too. Now I know which of my many handy talkie antennas that are dodgy..
@denp54z
@denp54z Жыл бұрын
Very good , thanks so much for the SWR instructions- my purpose- you drilled down to the very basics for the device. Thanks again.
@pauljordan756
@pauljordan756 4 ай бұрын
Best to the point explanation of NanoVNA SWR operation I have found. Thank you!!!
@terryd2634
@terryd2634 4 жыл бұрын
The best tutorial explaining calculating parts and how to set up for swr. Thank you.
@garyoliver8183
@garyoliver8183 3 жыл бұрын
Ttttttttuggggggggggggrttuuututtuuututdhdhyryyrw has po a lllttrr Yhhhû
@kennethausten
@kennethausten 3 жыл бұрын
Many thanks for your tutorial. Recently bought one. Oh heck where do we start. Duffle around and worked out the menu. But got no further. So ytube search saved the day. Just made a 4m half wave vertical and ended up adjusting in the conventional Manor. So thanks I now have the info I need to use this vna. I can see a lot of good use for this later with all the other features for circuit design. De. Gw4gja ken
@les2934
@les2934 3 жыл бұрын
Thanks for the tutorial! Answered some basic questions I had. look forward to more tutorials.
@johnwest7993
@johnwest7993 2 жыл бұрын
You're right. It's complicated - (and I'm old.) That means it does a whole lot of things that other gear doesn't. Fortunately we have you and 1 or 2 others on KZfaq who understand it and take the time to teach us. It's very much appreciated. The dozens of people doing videos of opening their new NanoVNA's and describing the packaging, (and admitting they have no clue how to turn it on or what it does,) not so much. During my tech career I never had the time to really play with some of the more sophisticated equipment and truly learn how to use it, and I certainly couldn't afford to buy my own . That frustrated me for years. 've already watched about 10 of your NanoVNA videos, 2 or 3 of them more than once. I find jumping back and forth between your videos and the actual NanoVNA on my bench to be a near perfect way to learn to use it. Again, thank you.
@pauljohnson7011
@pauljohnson7011 Жыл бұрын
I followed you with my new nanavna and what a great tutorial, I would have never figured it out on my own. Thank you from an 80 year old ham. 73 from kf4vot.
@kc3ppb
@kc3ppb 3 жыл бұрын
Awesome video, thank you very much! My NanoVNA V2 is arriving tomorrow and this is EXACTLY what I needed! SUBSCRIBED!
@cwebs1000
@cwebs1000 3 жыл бұрын
Thank you, Thank you, Thank you! I have been trying for some time to find a great explanation to use my VNA. I was ready to fine tune mine with a wammer. I only want to use it for antenna tuning. Carl
@Rainbient
@Rainbient 3 жыл бұрын
I applaud you sir!! Thank you very much for a well explained video!
@enzed1190
@enzed1190 3 жыл бұрын
This is an excellent presentation!! THANK YOU. I made lots of notes and will check out your other videos soon.
@skiptaggart8116
@skiptaggart8116 2 жыл бұрын
Excellent tutorial for down and dirty SWR checks! Thank you!
@michaelormandy6651
@michaelormandy6651 7 ай бұрын
Great video! I bought it to tune a home-brew antenna. This thing is so far beyond most users it takes a talented teacher to bring it down to what most need to understand, kudos. After learning the basics, I look forward to playing with more advanced functions in the future.
@IMSAIGuy
@IMSAIGuy 7 ай бұрын
I have a NanoVNA playlist
@roberts3942
@roberts3942 2 жыл бұрын
Excellent video that satisfies the needs of most people who purchase this device. If I buy one, you have given me the confidence that I can figure it out and get my money's worth. Thank you
@danmulkiewicz5515
@danmulkiewicz5515 2 жыл бұрын
Excellent video. Thank you for taking the time to make it!
@whitepinephotography5887
@whitepinephotography5887 3 жыл бұрын
Great Video, to the point, thank you so much. Now able to use it for the reason it was purchased even though it will do a lot more.
@russpeck1320
@russpeck1320 7 ай бұрын
I've had my VNA for a few years now, used your video to get me started. It's been a while since I used it, so I went back online to see if there are any tutorials, having forgotten about yours. I rediscovered yours, and still maintain that it's best way to get started. Fine work! 73
@john7046
@john7046 2 жыл бұрын
Brilliant video without going in too deep ,easy to understand , it good to see the basics
@davek641
@davek641 2 жыл бұрын
Thank you! My new Nano is charging and the instructions I found online were not helpful. You just saved me an Amazon return! Your presentation was spot on! I'm now very confident I can do an SWR in the various bands. You rock!
@Klehocky1
@Klehocky1 3 жыл бұрын
Thank you. This was awesome. I’m going to write a sheet of notes based on your instructions and keep them with my unit.
@michaelmcghie
@michaelmcghie 10 ай бұрын
This was one of the most helpful videos I have seen on the NanoVNA. Thanks for the help
@careycraig4360
@careycraig4360 Жыл бұрын
Great Video! REALLY!!, This was the EXACT information I was looking for and you spoke instructions in an Understandable way to me!! Thanks!!
@mikewillis6177
@mikewillis6177 3 жыл бұрын
I have had my NanoVNA-H for a little while, but some of your explanations and shortcuts are great. Definitely a subscriber now. I'm 66 and been a Ham for about 30 years. Thanks for sharing! Mike VE3FE
@hamradiotimes5586
@hamradiotimes5586 3 жыл бұрын
Great explanation, got me using it in 20 minutes. A million thanks...
@parkzoneradian
@parkzoneradian 2 жыл бұрын
Having never previously used an antenna analyser, I found your video very useful. Thank you.
@hervevdb
@hervevdb Жыл бұрын
Thank you for your excellent tutorial that I followed step by step. After that I have a clear picture of my antennas. I have to say that it is the best video on the topic NanoVNA. Greeting from a SWL in France.
@lmstrutt
@lmstrutt 2 ай бұрын
THANK YOU! I just ordered a NanoVNA to help me build a QFH antenna for APT weather photos. This video helps so much!
@SteveWaterhouse
@SteveWaterhouse Жыл бұрын
Perfect focus on one topic and how to execute it. Thank you!!!
@stevecampbell4118
@stevecampbell4118 2 жыл бұрын
Great video! I have one arriving in a couple of days and now I feel confident I can make it work. Thanks,
@thrillscience
@thrillscience 3 жыл бұрын
Thank you! I love your presentation/teaching style.
@user-hd8fh7zy1b
@user-hd8fh7zy1b 7 ай бұрын
This is the best video I've seen because it showed me how to measure SWR without extraneous info. Thank You! 73's
@timothym2241
@timothym2241 3 жыл бұрын
Thanks, just what I needed to know to get started. Great explanation.
@tantrispicks2440
@tantrispicks2440 2 жыл бұрын
Best instructions ever made. Thanks.
@stuartmccloud307
@stuartmccloud307 Жыл бұрын
What a brilliantly simple video, thanks buddy, you got me up and started in no time :)
@SoulStarLA
@SoulStarLA 29 күн бұрын
Super video! Clear, concise, and perfectly explained for a newbie. Thank you. I now know my new Diamond X30A is tuned well for both 2M and 70CM.
@neilklagge4911
@neilklagge4911 6 ай бұрын
That was an awesome presentation. Just what I needed to get started. Thank you very much!!!
@draghiciciprian4002
@draghiciciprian4002 5 ай бұрын
Great, great presentation and a awesome tutorial. Everything is very easy to understand. Thank you!
@bradmitchell876
@bradmitchell876 3 жыл бұрын
Thank you. I've had this thing for three months, and was scared to pull it out. This was a very well done starter video. Got right to the point, showed steps clearly. Mine is now OUT of the box and charging!
@W7MMG
@W7MMG 3 жыл бұрын
I watched this video yesterday and ordered one this morning. Looked complicated as hell till he explained it. Great vid!
@5x9dev
@5x9dev 4 жыл бұрын
Would love this kind of video for measuring coax length, loss, and how to identify possible faults. Thanks for the videos!
@rhwinner
@rhwinner 3 жыл бұрын
Possibly his other videos on the nanovna get into this...
@HIPCHIP
@HIPCHIP 3 жыл бұрын
Thank you so very much for doing this video. I've been wanting to get a NANOVNA for a long time but was afraid I'd never figure out how to use it. After your video I went out and purchased one. Better to spend $50 than $400 when all I want to do is check an antenna. Hopefully I'll figure out how to do more with this little unit, so you've given me a lot of inspiration.
#548 LM317 with Transistor for more Current
10:43
IMSAI Guy
Рет қаралды 37 М.
#564 NANOVNA Coax Loss Measurement
9:27
IMSAI Guy
Рет қаралды 59 М.
⬅️🤔➡️
00:31
Celine Dept
Рет қаралды 51 МЛН
Я нашел кто меня пранкует!
00:51
Аришнев
Рет қаралды 1,3 МЛН
Always be more smart #shorts
00:32
Jin and Hattie
Рет қаралды 40 МЛН
nanoVNA - Measuring Antenna & Coax Characteristics (Revised Feb 16, 2024)
33:04
Gregg Messenger - VE6WO
Рет қаралды 5 М.
NanoVNA Calibration: Expert Tips and Tricks
15:05
TheSmokinApe
Рет қаралды 19 М.
Which NanoVNA Should I buy? - TheSmokinApe
17:22
TheSmokinApe
Рет қаралды 64 М.
NanoVNA - SWR Reading Made Easy
8:56
Ham Radio Hobbyist
Рет қаралды 33 М.
How to tell if you have a bad NanoVNA
23:23
Temporarily Offline Ham Radio
Рет қаралды 40 М.
How not to damage your NanoVNA when measuring SWR
36:30
joe smith
Рет қаралды 68 М.
NanoVNA a $50-$70 Amateur Radio Antenna Analyzer?
12:57
Ham Radio Crash Course
Рет қаралды 198 М.
NanoVNA Calibration and Setup
12:03
Transmitting Until Robots Replace Us
Рет қаралды 47 М.
NanoVNA Calibration
4:07
James Nagel
Рет қаралды 10 М.
ИГРОВОВЫЙ НОУТ ASUS ЗА 57 тысяч
25:33
Ремонтяш
Рет қаралды 292 М.
ПОКУПКА ТЕЛЕФОНА С АВИТО?🤭
1:00
Корнеич
Рет қаралды 3,3 МЛН
Gizli Apple Watch Özelliği😱
0:14
Safak Novruz
Рет қаралды 4,8 МЛН