@ibs_star is it one of the 16 routes?

@ibs_star Only line 415 is available on this map

@ibs_star when I play it it is on one of the buses I think C400 or EvoSeti

Were is the middle mouse on laptop?

@@JimmyDali how do you put ur foot on brakes and put the bus onto drive

Glad 2 help!

Glad 2 help. Enjoy! 😎👍👍

Thank you very much my friend. I've been meaning to do a tutorial for this game for a long while now but after seeing and playing on the long-awaited London add-on I figured it was the perfect time for me to get things done. Cheers buddy! How are u fairing with Cyberpunk?

@@JimmyDali yes good idea mate. Going on it later so wish me luck as Need to check some things before I stream it later. I still using display for now as it was ok after I change it I hope the update they did helps with things too

@@oddball76Gaming Ok cool buddy. Let me know if you want to chat on Discord, maybe share OBS & game settings if u like.

@@JimmyDali Cheers buddy I mite do that

@@oddball76Gaming Cool I'll be there

Glad to hear. I hope you get some awesome runs in now. 😎👍👍

@@JimmyDali Fingers crossed 🤞. Thank you

@@JimmyDali Thank you its now working and the map is all loaded now and no blank areas

@@Jeromeg27 Glad 2 help buddy. Enjoy!

Glad to help!

Long time coming.

😂so true!

Good 2 hear my friend!

Awesome!

I'm glad I can help!

You can select Keyboard to play OMSI 2 as well. I have never played with keyboard though. Cheers.

@@JimmyDali oh ok thx u can have a free sub

@@Dereelg15 just change the controls

If you don’t have a wheel or don’t want to use KB, use mouse steering and accelerate. It’s the **best** thing I’ve ever used in 30 odd years of pc gaming. Press ‘o’ on KB enables/disables it. This is the only game I own that I can forget to switch on my G29 or TrackIR 5 and alt+tab out and switch them on and then go back to the game, press Alt and switch them on and they work perfectly right in the middle of the game! A 10 years old game, as well!!!

Thanks for the inspirational advice buddy!

Cheers fam! Long time coming.

Glad to help!

@@JimmyDali When i press CPU and it starts moving I press it again and what do I press after because when I press D it doesn't move?

@@adzino yes why?

Glad 2 hear that. 👍

Thank you!

Yes exactly my friend but that's only if you have auto save turned on. After game crash just select 'Load latest state of map' and you'll start exactly where your game crashed.

Glad it helped. Cheers!

I got rid of It, bit late now.

I show how to spawn a bus at 17:58 'maps & buses'

it all depends how high you set everything in the game's settings.

Glad to help my friend! 😎👍👍

Ty bro!

Cheers buddy.

You have to buy the OMSI 2 Add-on OmniNavigation on Steam

Centering should be a thing in OMSI 2. Basically it all depends on how much FFB centering and intensity you have set on your steering wheel in the game & on your steering wheel software

Yes. Step 1. make sure you load a map without any buses. Step 2. select a London city bus and make sure you have London Depot selected as well (very important). Step 3. Once you're in the bus and selected your route click on Mobitech ICU 400 and follow my first few clicks like I did at 44:49 until you find your line number and final destination. Simple. Step 4. Now wait a few minutes until outer display panels scroll to the # & destination chosen. Could take a few minutes BE PATIENT.

@@JimmyDali You are lifesaver thank you. It was the depot that I was getting wrong. muchly appreciated and keep up the good work

Thanks Kostara!

Thanks Vel! 😎👍👍

same here just depends how much u load on ur cpu, traffic, parked cars, pedestrians, scheduled buses, textures, draw distance, tiles, reflections, shadows etc. the more you add the harder it gets for cpu to generate everything

You have to download the map & add it into your maps folder. Next step is to run OMSI 2 & select London on the top right corner of the UI

Totally agree.

Something to do with the textures I think. Try raising or lowering them until it fixes.

@@JimmyDali how so you higher or lower them

@@davisarabic50 Follow this guide. All this depends on how powerful of a setup you have. Due to OMSI 2’s graphical limitations, you may need to adjust your settings. Performance may be affected due to the size and density of London as well as external factors such as your computer hardware. We have listed below multiple ways to improve the game’s performance below. Wrong settings can lead to a low frame rate (FPS), white or missing 3D graphics, missing sounds and an error message “System error code 8”. This add-on comes with recommended settings that can be called by using the options menu - “Load options”. This will globally affect OMSI 2. It is recommended to save your current options before changing or loading the settings. You can also modify certain settings by yourself. The largest increase of performance will be achieved by reducing the options “Neighbour Tiles Count” in “Graphics” to 1. Also, use the tab “AI-traffic” to set “Schedule Priority” to 1 or 2 and “Road Traffic Scheduled” to 20-30. If you still experience issues with performance, use the following recommended settings: • Graphics - Real time reflections: Economy • Graphics - Particle systems: off • Graphics - Stencil Buffer Effects: off • Graphics (advanced) - Max. Tex. Mem.: 1024-4096 MB depending on your GPU • Graphics (advanced) - Real Time Refl. Size: 256-512 • Sounds - Max. Sound Count: 400 • AI-traffic - Road Traffic Max. Count: 130 • AI-traffic - Road traffic factor: 50 % • AI-traffic - Parked cars: 50% • AI-traffic - Humans Max Count: 500 • AI-traffic - Factor Passengers: 100% • AI-traffic - Use reduced AI list: active We also recommend the use of the 4GB patch. Since London can use quite a lot of internal memory. which can lead to missing textures on the buses and buildings: ntcore.com/?page_id=371 Please note, the 4GB patch is not required to run London successfully

Thank you so much!

You have to put a checkmark the 'inverted' box beside your accelerator & brakes in the game's steering input settings

@@JimmyDali is that the Rev. box? if so, ive done that and it still doesnt work

@@gamingwithpros4047 At time stamp 12:45 look at OMSI 2 Game Controller options window. Make sure your steering wheel is selected from the list by checkmarking the 'active' box. Then on bottom left of window where it says 'Axis/Buttons' click on 'Axis'. Now you'll see steering, throttle & brake axis. Beside each one you'll see a box titled 'Inverted'. Check the box for throttle & brake pedals and test your wheel & pedals now.

@@JimmyDali inverted/reverse doesnt work, ive tried it, and yes i have followed everything in the video

You buy it online from PeDePe's website. pedepe.de/onlineshop/product/14

Same problem here. Just lower the sensitivity slide bar in OMSI 2's steering wheel settings....oh and avoid hitting the curb lol.

Have the same issue here tried to lower the omsi 2 ffb slider but is still the same any advice?

@@JamGamer181 Are you using the older 'Logitech Gaming Software' app? If so, uninstall it and download the newer 'Logitech G-Hub' app. Maybe that will fix your problem.

Jimmy Dali I use Logitech G-Hub

@@JamGamer181 Then I suggest you uncheck the box that says 'Collisions with other vehicles & landscape' in the games options menu.

cheers buddy ty for the info

u have to already own or buy the omsi 2 base game first ...then buy the london dadd-on.

You buy it online from PeDePe's website. pedepe.de/onlineshop/product/14

I will once I'm back 100%

i mention my specs in video description & in the video.

There is a front right passenger view that you can switch to but its visibility is not good enough to drive from for the whole route.

@@JimmyDali thanks m8 for replying

This is only on pc

Yes if you remap brake and gas in the game to your pedal set it will work

@@JimmyDali what do you mean

@@User-fu7io Paste this In KZfaq search bar...'omsi 2 logitech g29 setup guide'. Plenty of videos to help guide you on how to setup your wheel & pedals. Cheers.

@@JimmyDali thanks

@@User-fu7io Anytime 👍

I don't use a keyboard. I state that numerous times in the video.

Yes you can

Thanks m8

Yes it was played on Windows 10

use the keyboard arrows

@@JimmyDali thanks

You buy it online from PeDePe's website. pedepe.de/onlineshop/product/14

with my leg? trick question?

I've also experienced this bug. Close OMSI 2 and start new map without any buses. Once map loads select a different bus from the one you previously had.

When u spawn a bus make sure the depot is set to London.

Thanks for the tip

I thought I had it installed already but it needs re-install after every new game update

@@JimmyDali yeah when you have omsi 2 on steam it will restore evrything every update, only you settings will stay the same.

@@JimmyDali i test my graphics at berlin X10 in the city and there you have the max loud of the game and then you can easy check every setting

@@ArthurvanGinderachter Cheers!

Generally making my camera move around the cab

Ty my friend

Let me put it to you simply. It took me 10 years of testing and trial & error to learn one thing about OMSI 2. THE GAME NEVER PLAYS NICELY NO MATTER HOW MUCH YOU TRY.

I really want to play this game....have you heard of any professional installers other than Geek Squad, Staples and Microsoft tech supports....no one can help

Which bus were u using?

@@JimmyDali 400mmc

@@claimediraq9715 Its happened to me as well with the 200

I really don't know what causes that.

Had the same issue as well. For some reason the terminus display tends to turn off randomly :/

Thank you my friend!