In-the-Hoop Mug Rugs, Trivets, & Coasters for Machine Embroidery

Рет қаралды 24,265

Күн бұрын

Learn how to make mug rugs, trivets, and coasters in-the-hoop on your embroidery machine! Follow along as we demonstrate the steps and shows the differences between these popular designs.
TIMESTAMPS
0:00 Introduction
0:50 Mug Rugs
4:45 Trivets
6:48 Coasters
7:30 Conclusion
SHOP ALL MUG RUGS, TRIVETS, & COASTERS
In-the-hoop mug rug designs: www.emblibrary.com/EL/search....
In-the-hoop trivet designs: www.emblibrary.com/EL/search....
In-the-hoop coaster designs: www.emblibrary.com/EL/search....
FEATURED EMBROIDERY DESIGNS
Sewer’s Delight Thread Spool Mug Rug (In-the-Hoop): www.emblibrary.com/EL/Product...
Daisies and Honeybee Mug Rug (In-the-Hoop): www.emblibrary.com/EL/Product...
Gnome Mug Rug (In-the-Hoop): www.emblibrary.com/EL/Product...
Christmas Gifts Are Waiting Mug Rug (In-the-Hoop): www.emblibrary.com/EL/Product...
Farmhouse Chicken Trivet (In-the-Hoop): www.emblibrary.com/EL/Product...
Art Deco Flower Trivet (In-the-Hoop): www.emblibrary.com/EL/Product...
Crazy Patchwork Heart Trivet (In-the-Hoop): www.emblibrary.com/EL/Product...
Winter Favorites Trivet (In-the-Hoop): www.emblibrary.com/EL/Product...
Eight-Point Star Trivet (In-the-Hoop): www.emblibrary.com/EL/Product...
Santa Trivet Ornament (In-the-Hoop): www.emblibrary.com/EL/Product...
Snowman Trivet Ornament (In-the-Hoop): www.emblibrary.com/EL/Product...
Cozy Winter Coaster - Owl (In-the-Hoop): www.emblibrary.com/EL/Product...
Cozy Winter Coaster - Polar Bear (In-the-Hoop): www.emblibrary.com/EL/Product...
Cozy Winter Coaster - Fox (In-the-Hoop): www.emblibrary.com/EL/Product...
Ginkgo Leaf Coaster (In-the-Hoop): www.emblibrary.com/EL/Product...
Fern Leaf Coaster (In-the-Hoop): www.emblibrary.com/EL/Product...
Maple Leaf Coaster (In-the-Hoop): www.emblibrary.com/EL/Product...
Aspen Leaf Coaster (In-the-Hoop): www.emblibrary.com/EL/Product...
Radiant Robin Coaster (In-the-Hoop): www.emblibrary.com/EL/Product...
Happy Hummingbird Coaster (In-the-Hoop): www.emblibrary.com/EL/Product...
Beautiful Blue Jay Coaster (In-the-Hoop): www.emblibrary.com/EL/Product...
Cheerful Chickadee Coaster (In-the-Hoop): www.emblibrary.com/EL/Product...
Lattice Top Pie Coaster (In-the-Hoop): www.emblibrary.com/EL/Product...
Autumn Leaves Pie Coaster (In-the-Hoop): www.emblibrary.com/EL/Product...
Pumpkin Pie with Whipped Cream Coaster (In-the-Hoop): www.emblibrary.com/EL/Product...
LET’S CONNECT!
Shop Embroidery Library for high quality machine embroidery designs: www.emblibrary.com/
Join the Official Embroidery Library & Urban Threads Machine Embroidery Community: / 373438234679123
Subscribe to our KZfaq channel: / @embroiderylibraryel

Пікірлер: 48

@roneloberholzer2068 11 ай бұрын

Since spray adhesive can clog up machines badly, I use a stitch and cut ith method. I also find that pre-cut is hard to fit exactly and can cause slight gaps because of movement of stitching foot. To reduce shifting, it helps to pre-wash with stiffening (i.e. left-over wash-away stabilizer dissolved) and iron flat. 1. DL 2. Put down piece of fabric, stitch tack down. 3. Remove hoop (leave design in hoop) and trim close to line ith. 4. Stitch embroidery details. 5. Repeat for other details and back. What do you think?

@EmbroideryLibraryEL 10 ай бұрын

There is definitely more than one way to go about doing applique and in-the-hoop projects!

@ginakasten 7 ай бұрын

If you use spray adhesive it is not necessary to use as much as she does in the video.

@bzgram3199 11 ай бұрын

Thank you for this clear and informative video. I have so many designs from EL. Now I feel that I can produce a trivet that I can gift to a friend of mine. I wasn't sure until I saw this.

@EmbroideryLibraryEL 10 ай бұрын

Wonderful!

@trienskloppers4236 11 ай бұрын

Thank you,I find all your videos so helpfull and the designs are very nice.

@EmbroideryLibraryEL 11 ай бұрын

Glad you like them!

@leahg4596 11 ай бұрын

Too much spray adhesive for me. Prefer to use a glue stick or basting glue. Cute projects.

@Jacelyn5440 11 ай бұрын

This video is very helpful. Thanks for sharing! I have trouble sometimes trying to cut my already stitched batting and fabrics close to, but not cutting through, the stitches.

@EmbroideryLibraryEL 10 ай бұрын

Glad it was helpful!

@quebellorecordar 9 ай бұрын

Great video! Can you use Polyester top/bobbin thread? Thanks you!

@EmbroideryLibraryEL 9 ай бұрын

Yes you can! We use 40 wt. rayon, but polyester can be used as well.

@sharongreen3125 11 ай бұрын

Love the video! What thread are you using? I want the large cone

@EmbroideryLibraryEL 11 ай бұрын

We use Madeira 40 wt. rayon!

@kathrynrandolph4463 11 ай бұрын

I love all of these. I do have a separate question... if I get a new embroidery machine and it downloads a different type pattern than my current emb machine, is there a way to convert them over?

@EmbroideryLibraryEL 10 ай бұрын

Yes you can! If you go to your profile, you can set your preferred format. Once you do, your downloads page will default to your chosen preference. If you have more than one machine, you can also use the dropdown menu that is below each design on your downloads page and select a format on an individual design basis.

@sharonsienaski6919 11 ай бұрын

Can I use Heat nBond Light instead of the spray adhesive?

@EmbroideryLibraryEL 10 ай бұрын

We have never tried this, so we can't speak to whether it would work or not.

@Teresa-L.2024 10 ай бұрын

Yes! Heat n' Bond Lite works really well. Just apply to your fabric then hand cut out the applique pieces, or scan/import the Die Lines into your cutting machine and cut them out. Just remember if you cut them fabric side down then reverse the DL shape. I usually leave the paper backing on the Heat n' Bond and place that directly onto my standard cutting mat and leave the DL shape as is.

@sharonsienaski6919 10 ай бұрын

@@Teresa-L.2024 thanks!

@TW-gb6mh 11 ай бұрын

I love your videos! I was too confused to try these before, but now I am ready to give it a try. But I do have a question: When you say "Anytime you see a die line...". Where do you see this? Will it show on the machine display, the way color changes are shown?

@EmbroideryLibraryEL 10 ай бұрын

There are two types of dielines: the first is a fabric pattern dieline. These files are separate from the full embroidery file and labeled with a DL. They should not be loaded with the full embroidery pattern, and only used for cutting out your fabric shapes. The other dielines are placement dielines that are included as color stops in the full embroidery file. These will be a single line of stitching that matches the shape of a pre-cut fabric piece. If you have further questions, don't hesitate to email support@emblibrary.com

@TW-gb6mh 10 ай бұрын

Thank you for the clarification!

@nananjdz 6 ай бұрын

Where it calls for the same color thread for the mug rug design, If I use a 40 wt thread for the top stitch can I use the same 40 wt for the bobbin thread?

@EmbroideryLibraryEL 5 ай бұрын

Yes you can!

@helenwingate5424 4 ай бұрын

I have just purchased the By The Sea coasters and find it very confusing any chance there is a video on this or coasters as you only showed trivet.

@EmbroideryLibraryEL 4 ай бұрын

Please send us an email at support@emblibrary.com. We would be happy to help you get this figured out! ☺

@Wanda6308 11 ай бұрын

I love these but I do have a question. I have two embroidery machines, one does 4x4 workable area and the other 5x7 workable area, will these patterns fit either of those? My problem seems to be most of these wonderful designs are to big for my machines. Please let me know if any of these patterns will work for me, thank you so much.

@EmbroideryLibraryEL 11 ай бұрын

Most of our coaster designs should work for you! Our mug rugs and trivets, however, usually only go down to a 5x7 size.

@sailordixie 11 ай бұрын

Maybe freezer paper ironed on them.

@mariacrum3428 11 ай бұрын

Can you use white bobbin thread?

@EmbroideryLibraryEL 11 ай бұрын

Since mug rugs, trivets, and coasters can be seen from both sides, we generally recommend that you bobbin match.

@markbaglien3707 3 ай бұрын

I am using the tear away stablizer and on the last stitch around. It is cutting out the coaster already, I am afraid that its going to come loose and mess everything up, any suggestions??

@EmbroideryLibraryEL 3 ай бұрын

What type of tearaway are you using? You can always email support@emblibrary.com and our team will be happy to help troubleshoot with you.

@lauraganey6010 11 ай бұрын

Can bobbin thread be 40 wt like the top thread?

@EmbroideryLibraryEL 10 ай бұрын

Yes it can! for projects that will be seen on both sides, we often recommend matching the top thread to the bobbin thread.

@cherylcorrigan3235 4 ай бұрын

I tried the Here Kitty Kitty and had a wrinkled end result. Any suggestions?

@EmbroideryLibraryEL 4 ай бұрын

Please email support@emblibrary.com and our team will be happy to help troubleshoot.

@gladysalquier6417 11 ай бұрын

bonsoir, pouvez me dire ce que vous entendez par "ligne de découpe" s'il vous plait et comment elle se figure sur la feuille du motif, car c'est là mon problème, je ne sais pas à quel moment, je dois retirer le cadre de la machine et mettre un autre tissu. Cordialement. et merci bien

@EmbroideryLibraryEL 10 ай бұрын

The cut line would refer to where you cut when cutting out your fabric shapes using the files labeled with a DL. The DL files are your fabric pattern. With our method, we recommend cutting out your fabric prior to stitching. You print the DL files using embroidery software, then use them like a traditional fabric pattern.

@laurieberman6103 11 ай бұрын

Spray adhesive is not my friend. Other suggestions?

@pamelasherman1314 11 ай бұрын

Glue stick?

@jenniferalexander920 11 ай бұрын

I just use pins, I don’t like the sprays

@jenniferalexander920 11 ай бұрын

I use a medical tape called transpore to attach backings or do stuff ITH.

@patriciaredmon8975 11 ай бұрын

1. After the placement line has stitched, I use 2-inch blue painter's tape to hold the over-sized fabric in place. 2. After the machine has tacked the fabric in place, I remove the hoop from the machine, DO NOT REMOVE THE FABRIC FROM THE HOOP. 3. I use a pair of double curved scissors to trim away the excess fabric. 4. I place the hoop back on the machine and continue to stitch the next step. I'm an asthmatic & stay away from aerosol spray. I also feel that the painter's tape is a lot more economical. I have been using that roll of tape for several months. I hope this is understandable and best of luck with your applique.

@Teresa-L.2024 10 ай бұрын

The biggest mistake is using too much spray adhesive. I prefer to use the Sulky brand. You only need a LITTLE spritz to hold the pieces in place.... I use about one-quarter of the spray used in the demo. Regular school washable glue sticks also work.. once again less is best. For large pieces of fabric blue or green masking tape works really well and doesn't leave a sticky residue. There is even a washaway embroidery tape you can purchase for use in those areas where you need tape but have difficulty removing it after the project is done.