Motor build Ported cylinder heads Ceramic coating cylinder head and pistons Revolution performance 1300cc kit Andrew cams 61mm Black widow throttlebody BlackWidowDynos.com
Пікірлер: 48
@mark.lb116 Жыл бұрын
I also run a Revolution Performance big bore kit and Andrews 420 camshafts (along with some other modifications and a custom Lloyd’z tune) on my 2021 Scout Bobber ABS. There are two advantages of starting the build with a Scout (69 cubic inch) rather than a Scout 60 (60 cubic inch). You have a 6 speed transmission on the Scout vs 5 speed transmission on the Scout 60 and the Scout already has a 60mm throttle body vs the 54mm throttle body on the Scout 60. I also highly recommend upgrading the clutch after installing the big bore kit. The stock clutch will eventually fail under the increased horsepower and torque. I am running a Rekluse TorqueDrive clutch for Scout.
@bootymessiah154 Жыл бұрын
It's got a 61mm TB from a modified automotive Bosch and Barnett clutch kit.
@p.c.h.6721 Жыл бұрын
Thank you for the suggestions, I now have a project to look forward 👍
@HISVOICE4LIFE Жыл бұрын
Mark….did you do all the work yourself? Or did you have a shop do it for you? And what state are you? Im in Californiana
@mark.lb116 Жыл бұрын
I live in the suburbs of Pittsburgh, PA. I was involved in the planning of this build but I am not a trained mechanic. The actual mechanical work was done by Pitt Cycles (Indian Motorcycle of Pittsburgh) by technician Mike M. Mike did a great job building the engine, upgrading the brakes, adding various bits and parts and doing data logging rides and tuning the bike with Lloyd’z of Charlotte.
@HISVOICE4LIFE Жыл бұрын
What was the dollar amount if i may? Parts, labor, etc?
@user-gh2ff3yn4j19 күн бұрын
Damn that shit sounds good!
@timbrwolf1121 Жыл бұрын
Just when I thought I had my build planned out. Now I need to just buy a sixty. Even though I really want 6 gears the price differential just isn't there. I basically want a mini dark chieftain.
@adamxiong181710 ай бұрын
Good stuff guys.
@no_one_special_540711 ай бұрын
Damn.... i think i just found what i want done to my 2017 scout sixty but not sure I can afford it , cuz all i got done so far is a trask intake and gp shorty tips but what yall just did is just damn...
@littlebear444 Жыл бұрын
Lord have mercy. I might have to take a trip to San Antonio
@sinistar4269 ай бұрын
By the time its said and done, this is a 7k+ upgrade with ALL the needed parts, labor, and tuning.
@blackwidowpowersports60379 ай бұрын
Yes that is true
@etishbite4563 ай бұрын
It's alright because that's a low 10s bike. Which is kinda cool
@Itchy2much11 ай бұрын
Hey it's great chatting with you on the phone, it's hard to find experience and attention to detail, which you possess. Keep the videos coming, cheers!
@Itchy2much11 ай бұрын
Do you have more Scout videos? Hope your business is going well by the way
@HISVOICE4LIFE Жыл бұрын
BlackWidow Power Sports….do you guys do all the work in a package? The bore? Throttle? Tuning? Etc? Or the client has to provide all the parts and you do the work?
@kylecannon5679 Жыл бұрын
What would this cost minus the TB i have a bobber twenty with the 69cid
@labelskater6134 ай бұрын
The entire reason i bought the 60 rogue.
@mattmarken3114 Жыл бұрын
Is there a what to tune out the roll on throttle chop out? Seems like it is almost stumbling.
@daltonnadeau13394 ай бұрын
That’s only cause he was in 5th gear going 15mph to start, driving normally it won’t bounce/stumble like that unless you were almost stalling the bike
@johnny.grubbs1312 күн бұрын
After my warranty is up from my purchase, I know where I'm bringing my rouge
@ziahreid9269 Жыл бұрын
Is there a difference in valve size between the scout 60 and regular scout heads?
@blackwidowpowersports6037 Жыл бұрын
No bigger valves would be nice
@etishbite456 Жыл бұрын
@@blackwidowpowersports6037 Did you guys use the 420 or the 450 cam?
@BND407 Жыл бұрын
I’m looking to do cams. I see you did Andrews Do I need to get the high lift spring kit ? Andrews 450 cams
@blackwidowpowersports6037 Жыл бұрын
The cams I used did not need springs
@BND407 Жыл бұрын
@@blackwidowpowersports6037 I’m assuming you used 420 cams and NOT the 450 cams
@etishbite4569 ай бұрын
@@BND407yes 420s don't need new springs
@danielvasquez41057 ай бұрын
@blackwidowpowersports6037 So the bike had 420s or 450s then?
@etishbite4567 ай бұрын
@@danielvasquez4105 420s
@henrytischbein155 Жыл бұрын
Did you lose reliability with the big bore kit
@blackwidowpowersports6037 Жыл бұрын
It got thirsty
@danielvasquez4105 Жыл бұрын
Just to confirm the title, this Scout in the video is the Scout Sixty?