Thank you for watching!! If we helped you out and you want to show your support - LIKE, SUBSCRIBE or give us a shout out below. If you saw something you didn't like leave your comment below as well, these things help us get better!
To see our recommended tools and products visit our Amazon shop at www.amazon.com/shop/individua...
Pressure Washer Not Starting? Don't Panic! Discover How to Diagnose and Fix Your Carburetor Issues with this Easy DIY Guide.
We do a full diagnosis and repair on Craftsman CMXGWAS021022 pressure washer with Briggs and Stratton 190cc engine with the idle down feature. This is the issue we see the most after pressure washers (and everything else) have been sitting for a while after not being used.
We go through the complete process with tips and tricks along with the entire idle down spring assembly set up for best results.
This idle down assembly that is shown is one of the most complex out there that they make, so many moving parts that interact together.
We go over a full detailed view of all the linkages and springs.
Get it back up and running well using these instructions. In the video we did not clean the carburetor out extensively because there really was no gum or varnish.
If yours is gummed or varnished really bad you will want to pay more attention to every small orifice and crevice and make sure all of this is gone before re-assembly.
You can use pieces of a wire brush to get the small jets, you can also use torch tip cleaners, staples, safety pins or whatever else you can fit in them to make sure they are clean on these plastic carburetors.
Pay special attention to the emulsion tube jets and the brass jets as shown in the video.
Like and subscribe to see more helpful videos like this one! Save some money by doing it yourself!
#craftsman #carburetor #pressurewashermaintenance #carburetorcleaning #smallenginerepair #individualizedrepair #smallbusiness #diymaintenance
About Us:
My name is Martin. I have been repairing tools and small engines for almost 20 years. We operate a small engine repair shop in Illinois. We service / repair Briggs & Stratton, Kohler, Kawasaki, John Deere, Cub Cadet, Toro Tecumseh, Loncin, Honda, Craftsman, Husqvarna, MTD, Troy Bilt, Simplicity, John Deere, Exmark, LCT, Generac and many more brands. We work on riding mowers, walk behind mowers, snow blowers, zero turns, generators, pressure washers and much more. We normally repair about 3,000 pieces of equipment every year and look at many more that are beyond an affordable repair. Hopefully our videos will save you some money and give you the information you need to work on your own equipment or figure out the issue at hand.
Disclaimer: Links included in the description are affiliate links. As an Amazon associate we earn from qualifying purchases. There will be no additional charge to you for purchasing here. We appreciate your support, which allows us to continue to provide original content!
Please be careful when repairing any piece of equipment and follow all possible safety measures. This video is for entertainment purposes only.