No video
Industrial Design with the Power Surfacing add-in for SOLIDWORKS®
Рет қаралды 6,809
Күн бұрынDownload a FREE 30-Day trial of the Power Surfacing RE add-in for SOLIDWORKS® today: bit.ly/PowerSu...
For more information visit: www.NPowerSoftw...
Video brought to you by the talented Hëshäm Ashräf! ( Check out more of Hëshäm Ashräf's designs here: / hesham19999 and / @heshamashraf936 )
Music Info: Piano Inspiring Dream by RomanSenykMusic.
Music Link: • Piano Inspiring Dream ...
@majidhadizadeh9645 3 жыл бұрын
Perfect!!👏👌👏👌
@npowersoftware6638 3 жыл бұрын
Thank you SO much!
@3Dprining.I 2 жыл бұрын
tasteful
@basilechardey2568 3 жыл бұрын
wow NICE!!!!
@npowersoftware6638 3 жыл бұрын
Thanks so much!
@Ehsan3257 3 жыл бұрын
Big Like
@gyermanjanos98 2 жыл бұрын
I like this add on. how about cloud based sculptor? i gues they are not yet on the same level... I have heard that cloud is the future, what about your package then? will be somehow embedded into solidworks cloud platform?
@krishnaiyengar6414 Жыл бұрын
How to do pirticular tangent and radius...
@nickallen7427 2 жыл бұрын
This is awesome. Can you go back and edit the sub D body after converting it to a solid if you need to make changes?
@npowersoftware6638 2 жыл бұрын
Yes, that is the great advantage over traditional surface modeling techniques. You can make changes and it will not blow apart.
@harisshaikh8993 3 жыл бұрын
Amazinngg... 😍😍🔥🔥 How much time did it took to complete?
@heshamashraf936 3 жыл бұрын
30 minuets
@harisshaikh8993 3 жыл бұрын
@@heshamashraf936 Awesomee... 😍
@heshamashraf936 3 жыл бұрын
@@harisshaikh8993 Thanks!
@npowersoftware6638 3 жыл бұрын
So talented!!!
@heshamashraf936 3 жыл бұрын
@@npowersoftware6638 ❤️❤️❤️🔥
@yeasuitea4928 3 жыл бұрын
Power Surfacing 6 is very difficult to shell or thicken
@heshamashraf936 3 жыл бұрын
On the contrary, it is the best and fastest Add-in software in these two things. Solidworks sometime can't thicken parts and give an error, But power shell is not.
@yeasuitea4928 3 жыл бұрын
@@heshamashraf936 powershell takes a long time to shell and thicken，and the surface it create is poor quality. Power Surfacing 6 has many great functions，but Freestyle in Creo 7 is much better in these two things.
@heshamashraf936 3 жыл бұрын
@@yeasuitea4928 you have ability to control the quality from the side menu.
@richardhead8264 3 жыл бұрын
yea suitea _That would depend upon the suitability of a model for shelling or thickening at a given offset._ _Considerations like _*_small radii of curvature, absorbed faces, singularities and cusps_*_ are often overlooked._ _SolidWorks is generally quick at shelling and thickening when the aforementioned irregularities are addressed._
@krishnaiyengar6414 Жыл бұрын
How to give dim in power surfacing
@npowersoftware6638 Жыл бұрын
Using Sketches or surfaces in Solidworks and use it as references.
@stevewill3572 2 жыл бұрын
Is this regular solid works?
@npowersoftware6638 11 ай бұрын
Yes with Power Surfacing Add-In
@kandasamyrajan 3 жыл бұрын
First you should rotate the part in all direction and show what you are going to do.
@npowersoftware6638 11 ай бұрын
Its not like that in Subd Thanks!
Npower Software
Рет қаралды 2,4 М.
SolidWorks With Aryan Fallahi
Рет қаралды 516 М.
Npower Software
Рет қаралды 9 М.