You are the definition of not all heroes wear capes, when I am feeling a bit more confident, I will attempt this mod!! Will purchase the temalone.

I think your trem jig is really great. The only thing I think might improve it is that you could put a small 1/8 hole through the center of the removable studs. This would give you a more precise centered pilot hole to drill your stud holes. Just a thought. Great idea. I hope you make a million 😊

It's awesome that he has a Steve Vai influence and I can hear it in what he's playing on the guitar. I love Steve Vai's music.

I always been puzzled that Floyd Rose didn't come with something like this, or at least a template of sorts... good one!

Great piece of kit!! It's very likely someone has already suggested this but here it goes: How about the Tremalone is one single piece (3D printed studs and base) and the holes on top of the studs go all the way, this way, instead of removing the 3D printed studs and drill with a big ass drill bit, you drill with a very small drill bit and the tremalone works as a guide to make sure your holes are perfectly square to the guitar body. Cheers!!!

First of all, you are a GENIUS. The product I got from your Reverb page arrived quickly and works and looks great! This is a great idea here! I'll be watching you. I can't wait to see what you come up with next! Thanks, and keep up the good work!

Glad I stayed til the end, that’s some killer Modal stuff!!!

That's a neat piece of kit you have there. Great innovation.

IMPRESSIVE playing! Love your style. Sweet jig. I ordered a Vega bridge and locking tuners for my baretta special in candy blue. If only I’d seen this video earlier. Cheers!

Wow mate your little 3d printed jigs are incredible! Amazing work! If I ever desire to "floyd" a fender one day I will definitely be buying this little setup from you!

You did an amazing job on this!!

You had me at "Questionable Guitar Mods". 😁

This was absolutely phenomenal. I honestly think I will try your product.

DUDE! thanks for this video. Thinking about getting another B Special and do this. Thanks again

Fantastic idea. And awesome vibrato at the end, man.

Best part was your playing .. beautiful!

I’ve got one of these on order Looking forward to doing this to my Barretta Seems like the easiest method

Good work! Nice solo at the end, too! I´m subscribed.

Awesome! Love the Kramer Baretta Special guitars!

Beautiful playing, man 🙌

I commend you on a really cool invention for locating the new Tremolo studs but I'm surprised you didn't think to create a router template to perfectly rout the tremolo cavity using a proper router and router bit. It would be easy to print one of those out specially if you figured out how to create and print your first tool. Hope you don't think I'm insulting you, not at all just throwing an idea out in case you didn't already think about it. Routing with a proper template and router will produce a much cleaner cavity and preserve the paint if taped off properly. Love the upgraded Kramer, those guitars kick ass and I really like the tool you created I build guitars and would love to buy one of those! Keep up the great work man!

That is a great idea! I’ll definitely order some next time I do a floyd swap

Awesome! Wish I had something like this years ago, when i wanted to replace my trem with a Floyd Rose! Subbed!

Nice idea. Hope everyone paid attention that this is specific design to work only on this model guitar.

Amazing invention, and great video!

Great video...ive been wanting one of these guitars since they came out.

Honestly, a great idea. The only thing I can think of that might make it even better is including a 12mm disk with a hole in it large enough for a center punch or a small drill bit, so those who aren't using 12mm bushings have a really easy way to mark the center for their drill bit.

Can't wait to get my Tremalone from you, I am going to modify it slightly and move it back so there is no visible tremolo hole behind the Floyd, maybe 3-5mm, I know it will make the scale slightly longer than 25.5 to maybe 25.75

This is brilliant!

Dude, that thing is awesome 👌

Love your playing style

Worth sticking around for the solo at the end.

Love your playing

Nice, and the cool ending too ala Vai meets Devin Townsend.

I have returned my Baretta at Thomann's when I figured out that instead putting $150 more on accessories, I could buy à B-Stock Kramer vintage for the same price ! The Kramer vintage sounds great and has a factory Floyd Rose tremolo and better locks and nuts.

Genius and affordable. Ty

Great work

That purple gold and black look amazing though! I bought the white one with the black headstock.

I used this on my blue Kramer Baretta. I drilled out the bushings carefully. I used a drill press, I'd recommend anyone doing this use a drill press. I also reluctantly routed my body using a compact router. The shims work well, they should be pre-drilled to make it easier. But I'm happy with the install. A machinist can make you hard metal bushings for perfect drilling.

what a great product

Ordered the Tremalone and the shims!! Can't wait to mod my Baretta!!

Every new guitar that I build, or upgrade, I use the Gotoh 1996t.! I can’t wait to see the next video.!!

That gold trem looks great with that guitar

Very nicely done you made the swap to a Floyd Rose look so simple!

Nice idea. A few suggestions would be to elongate the mounting holes so you have the option to dial in the scale length. You could also press in some 3mm drill bushings in the pull-out studs so you can start a 3mm pilot hole and know you are drilling dead center.

Great idea

I want to give this a go one day doesn’t seem too hard and it would make the guitar a million times better

Awesome guitar and video!

Cool, original idea!

1 minute in and I started looking if you are Greek. Bless the accent

I was crying a bit seeing you remove that wood without even thinking about the dust getting in the pickup, lol.

Best System ever! Great

slick little jig.

This is a great device to facilitate this conversation. If the plastic fit up studs had a through hole for center punching that would make it even more fool proof.

okay... this is brilliant...

Great Idea 💡

excellent video....... good Lydian Mode

Looks cool? The a tion is so good on these neck low and no buzz at all does this raise the Acton more thanks for the vision.

Great idea!! What was that loud hum at the end?

tasty soloing, by the way!

fun fact - jackson js32 now come with this tremalone thingy. never seen it before but its on my new js32.

I will be buying the 3D printed shims, much easier than shaving the head removing the hump and custom cutting a piece of maple shim. Something everyone should do before installing a floyd style top mounting nut is see how far off center the truss rod access is. My Gotoh nut caused the screw to blow out the wood wall of the truss rod groove. I had to make and glue in a custom bridging piece of wood with an arch to clear the Allen wrench access to the truss rod. This could happen even with this excellent 3D printed shim. As the saying goes, measure twice cut once.

Might need to make a disgusting tele build with one of these! Thank you for demoing this!

That's a great tool you made! Where did you get the red tremolo from? I've been using Jackson jt580 trems which the same as a Floyd pro but way less money! Plus I like the small Allen screws that are just behind the saddles that lock down the string block's instead of going all the way through and out the back like most are

i use acetone and Q-tips to get rid of old glue. It's usually CA that's used.

Very nice! Μπράβο!

Should make the temp studs good for pilot drilling so it would be dead center. Then you can use any other drill bit after that

I've understood everything in this video, its very good but what are those plastic pieces you put inbetween the neck and the body and where can i buy them in the right size/angle?

I kinda like the pink and gold look

В юности мечтал заиметь гитару "крамер" - мне они казались тогда верхом совершенства. Я стал гораздо старше, теперь мне ближе "стратокастер"😁 Но только бридж чтоб был флойд роуз😆 И да - у этой розовой красотки удивительно приятный сустейн ;) Спасибо за видео.

Neat gadget!!

Awesome 🥰

you can actually put a piece of a toothpick into the holes for where the neck connects to the body, to make them act "fresh" and strong again. also I would replace all screws with stainless steel for more sustain.

Can you tell me more about the neck shims you used? How much did you raise the neck?Thanks

You need to have an 1/8" starter hole in your black mount screws for the Floyd Rose. To center any of the different size body nuts.

Ένα 8μηνο νωρίτερα αν το είχες βγάλει θα είχα γλιτώσει τα 45 λεπτά υπολογισμών και μετρήσεων όταν το πέρασα στη δικιά μου χαχαχα! Το shim για το nut έκατσε κουτί πάντως, έχεις κάνει φοβερή δουλειά!

this is really good, does it dive bomb well??

Wow... Amazing. What is that thing you use for the neck shim? is there a template for that? Cheers

Without the big trem route can the floyd style trem dive in and out completely?

Thank you for the informative video. I’m curious as to how did you go about painting the red FU-Tone bridge? I watched the OU812 mod video a while back but I don’t remember you showing the bridge painting process. I’m thinking about painting a Floyd Rose bridge red as well. Thanks!

What kind of neck shims did you use? What material and size?

Great! Great job, I have a guitar to do a makeover like that. Is this tremalone a tool? This would break me a branch in the installation.

Qual o nome dessa peça que usou embaixo do lock nut?

Brother, please... 🙏🙏🙏... tell me where you bought that red floyd rose !

Is the red one repainted? do you use powder coating or just using spray?

Will this work with a Stratocaster guitar or just this kramer?

Hello, how you gets red floyd rose ?

Hi. What's the locking nut dimension? Thanks

So what just happened with the neck shims? Do you supply those?

Thanks

Do you have a video of the finished baretta yet.

14:28 putting that supplement on the neck pocket doesn't affect the sustain?

Is can I buy the File for my 3-D printer

I so wish this came up on my feed earlier! That nut shim device is genius. Does it also work on Fenders or is it only for Kramer only?

This is genius, love it. Am I right in thinking that it would also be compatible with fender/squier Strats?

String height at the nut is not an issue with the shim? Good Idea though. Like others suggested. A center hole with the plastic studs would be useful. Nice playing.

Very cool, Sir! Is the Floyd dive only like EVH? Or floating?

What size shim for neck?

You should just make a kit package to order the complete kit with one click!

Already did it out a gohto on it