2003 G35 Coupe, 6spd: This novice saved $560 from mechanic quote by purchasing "A-Premium Anti-Clip Function Window Regulator Motor for Nissan 350Z 2003-2009 Infiniti G35 2003-2007 Front Left Driver Side" for $39.98 on Amazon (delivered next day). Install took approx. 45-60mins and 3 beers. Works like a charm... I should have done this long ago. Thanks, Motordyne G35 for the awesome step-by-step tutorial!

Your the man!!! I just did this to my car following your instructions 👌🏼!!! You just saved me over $300 by DYI! Thank you brother and keep these G videos coming your awesome!!!

Thank you for this. Theses videos are extremely helpful. I changed my window motor, spark plugs, belts, cam position sensors, and cleaned my mass airflow sensor all from watching your videos. Thank you again.

Been tryna do this forever finally finished 😩 thanks for everything 🙏🏿. One of the best G/Z channels ever made

Me: *owns Miata Also me: *watches video on g35 window motor replacement

Bro that's awesome man ur whiling to meet up and help out people and show them how to work on them nice!

Thank you for your short video that helps a lot for us

My drivers side motor just quit on me, after I rolled it down. So I followed your steps but after removing the inner panel (interior)I banged on the place where the motor is mounted (inside metal panel) & ...it worked. Window went up & down, but if it's ALL the way down it wouldn't go up. So, I banged it again just to get it up in case of rain. I'm thinking the brushes may be bad, & a cleaning would work, but I'm going to replace the motor anyway since I see how to now! Thanks a lot, hope I don't have to use too many of your videos! 😎👍🏼

Awesome videos man!! Mine haven't gone out yet, glad you mentioned about Auto Zone 👍🏻

Thank you guys. This made it alot easier

Really great video! It got me into it and it took me about an hour to get it all done and buttoned up. Thanks!

Thanks for the video, my passenger side has had a few slight hiccups and I'm sure I'll have to replace it soon.

When I was trying to remove the 10 mm bolts off the panel, they keep on breaking off. Any suggestions?

Hey dumb question.. I got the new motor re attached and everything buttoned up to test, works fine and rolls up.. go to do reset procedure and the reset button is no longer accessible.. question is will this go back together and work if the motor is the wrong way? It drops like it supposed and goes back up when I open and close the door which to me I think it doesn’t need the reset? But at the same time I couldn’t do the reset even if I wanted to, it took 2 ppl fighting to get those bottom two aligner bolts for the frame back on and idk if I should open it back up and double check or button it up the rest of the way and roll with it lol.. at this point I’m glad to have a window but don’t want to do more damage over possibly having the motor the wrong way

I can't find any videos on how to replace the drivers side window regulator on a 2004 Infinity FX35

What button was he holding while putting the window down my window motor just went bad and I got another one and I’m charging it.

Do you think I would need to change the rail as well cuz I got my motors from a g and took it off with rails and everything

I changed the brushes in the motor and still working good as new years later.

Video help me out a lot with my window motor replacement. A few differences with my 2007 g35 coupe, you not only need to remove the 10mm bolts but the window frame bolts as well (4 of them). Also there is no window reset button. The window reset by shutting the door. Still this video help me get it done.

Quick question, is the driver side window motor on an 08 g37s sport coupe non-convertible 6mt the same as this car? My driver side window wont move at all.

This is much better than the other window replacement motor videos i've seen, thanks man

if i buy a used door from the local pick a part, are you able to put the door back together with the parts from the door I have on my car currently?

Very helpful and I needed this information

Can you please tell me where exactly is the reset button, thanks in advance...

What's the black cable that goes into the motor that actually lifts the window up and down

Nice I was told my passenger window motor is good it gets signal but wont roll down?? May need a switch only????

Made another job easier for me. Thanks!

Hey, so I replaced my window motor but now my key fob to to unlock and lock the door doesn’t work properly now please help

One of the most hated g35 replacements the window motor. Had to get mine replaced sucks if the window doesnt roll up and stays down then you have to replace it and get the window out of the way with out breaking it. Great video 👌

Where exactly is the window reset button? Cannot find it?

My window go down little bit when i close the door, should I replace the motor or is other problem?

Hey I've got a 2005 G35 Coupe. Going to replace the window motor. Can you give me step by step on the window reset procedure? I've seen several videos and seems no one does it one particular way.

What is name of part that window and lock cables attaches to on inside door panel. Broke mind and door won't lock.

nice great video bro this is so weird just right now at the afternoon i decided to take it to the Mechanic to fix my motor of the passenger window And Everything when good but my passenger door doesnt lock so it stays open and theh told imma have to go to a Yonke to get that part for cheap and installed cause its no after marker cable that will lock and unlock my door, what could other option i could do? please help and nice vid👌

damn I wish you was in SC to help on my G35

How to remove the window motor? + the same driverside door won't lock unless manuelly locked

First of all thank you for making videos! My window motor sometimes work, sometimes not. And it's very hard for motor to pull window up (needs physical help).

Hey bud. Do you know the name of the mount that the motor sits in? Mine is rounded out and I need to purchase de another one.

What brand motor is the one you use? I'm in Australia not paying a premium so I want to buy a good brand besides nissan.

My husband has been working on this same car & its still not working. Any advice?

Are both sides the same or do they use different window motors?

Amazing!

Thanks man great video! Got it done in half an hour on my 06 coupe! Try not to do this job alone it’s hard to hold some things in place when you’re putting in bolts and stuff also hit amazon for a motor is you’re on a budget, got my drivers side for 50$ and it came in a day 😁

Is it the same procedure for the sedan?

What radio is that on the g and how u get it to play videos ?

Hey man are you still in the Phoenix area? I recently bought an 04 and would love to get to know the car better, see what I should maintain, ect. Thanks for the videos!

Thank you for the video. The issue I have is with a 2013 g37 convertible and the windows lean out a bit allowing wind noise above 60 and a rattle generally. Adjustment or fix for this?

Does the window have to be up

So my windows roll down about 4, 5 inches as I shut the door. Also when I use the quick auto roll up/down . I was told to hold down on the window up/down button for about 10 sec each way. Still does not work properly. Idk what to do . Any advice to fix or am I gonna need new motor?

The 3 Phillips screws that are holding the motor to the power widow assembly is basically impossible to remove because it has lock washers. So I’m unable to replace just the motor. How did you take yours out??? The 3 phillip-head screws will just strip out on mine. I might have to buy the entire assembly now

Thank you so much !!!!

Where did you buy your screen in your car ?

Yo I can come to Phoenix could you help me out with my driver side window? It’s stuck all the way down.

Hello I see your in the Phoenix area do you do this as a job? My son needs two windows fixed.

Where are you located and how much do you charge?

Damn shame I don't live in Phoenix... I'd love for you to help me fix my annoying "axle click"! You've heard of that issue?

Got mine on eBay Let me know if it’s good ?

Hey bro I have an 04 g35 coupe my driver side window motor gave out but my window stayed halfway up, can it still be changed even though the window is halfway up??

Good Morning bro, are you still available for mechanic work?

the right window of my car g35 coupe is useless and I already changed the engine and still with that problem I don't know if it's the switch

Hey can someone help me out. My driver window is stuck down , I’ve replaced the switch and the motor but still won’t work. When I click the switch up it makes a clicking noise and I can feel the motor trying to work but idk what else it could be

Hi Motordyne G35, I probably watched this vid like 10 times and I bought the window motor from O’Reily’s and followed every step but when it came to testing out the window, it would get stuck in the down position. I know the electrical contact is there when you press the switch because I can hear it but for some reason the window gets stuck. Any suggestions? Props to all your vids man thanks!

Why did you cut out how you take the old motor off, after taking screws off? That was a very important step...

Hey brotha, I have an '06 G35 Coupe that I could use help fixing the passenger-side window motor. I'm located in Midtown Phoenix, I'd love to meet up to learn some things from you.

Hey bud, replacing my window motor. So is it safe to keep the window down while doing this? I heard some say to keep it up clamped?

Do door actuator replacement please

When do you know it’s not the regulator?

Great video, thanks. Seems like the Nissan/Infinti design on these is terrible, new window motor still sounds like its struggling on the way up. Too much strain on the motor

Mine was working fine until a few days ago it just makes a clicking noise when I push on it. Is it the motor?

Which button did he press when the door was close, I wasn’t about to see it ?

@motordyneg35 you in Phoenix ?

Bro what button are you talking about mine doesn't have one

My 35 dollar window motor from ebay is going strong. Just an option. It is a 12 year old car after all (mine is, 05 coupe)

link to the suicide door hinges please lol

Hey boss. What part of Phoenix? Would love a lil help with my 05 coupe

What was the specific part you used for the unit? I called O'Reilly's and they said $450

Wow great video. My driver side window is all the way up. It won't go down or up at all. The drivers side works fine. Do you think its the motor ? Or the regulator?

Thanks for the video. My wife helped me fix window after watching your video. Now I need to fix radio. The AC is stuck on auto @ 75 temp & radio controls don’t respond.

Are located in Texas

Please contact me for a drivers side window motor replacement Im in Sun City West.

My driver side is starting to act "sluggish" intermittently. Sometimes it doesn't work, but comes back by rapping on the door card. There is a very dull friction stripe 2/3 toward the front of that window. Is this indicative of a bad motor or is it something else? Thanks for what you do. Keep this gen alive!

Hey Motordyne G35, thanks this helped me with my window. I have another issue on my 05 Coupe near this one maybe you know about?? - Door locks work but only about every 45 seconds or so, no matter if I use the remote or the lock / unlock button inside the car. - First thought is it's the door lock actuators, BUT I don't think so cause they do work as long as I let them rest for about a minute in between uses. I can hear something that sounds like it's coming from the rear passenger area behind the interior panel like maybe a relay or something that feeds the locks that sounds weak? - But I'd compare it to a camera flash or a capacitor that needs to charge for a minute in between uses and then it works but if it's used right away it's too soon. Anyone have this issue? Any solutions? Does this even make sense lol?

Hey man my g35 motor won’t work can you help I will pay

Do you have to reprogram the motor or it should be fine?

Link

I have to change the motors on the TBird....I'm dreading it

I’m in Phoenix! How much for a driver side window motor replacement?

Where can i order the clear side markers ? Like yours

Hey bro, I would like to meet you but I live in Chicago. I have 04’ G35 coupe is only 28,000 miles. Owner for 14 years. My window driver side just died today.

The cost of the new motormplease..

I did everything as of video up until 3:52 but then when I had it all done the window would go half way up and then wouldn’t go upanymore

Would like to talk to you about working on my 2005 FX35 if you are interested. I'm in Chandler but can drive out to you. I'll message you through your channel.

Are you still in Phoenix?

Thinking about selling my '05 G35 sedan. Paint and body are rough. Front seats are rough. Interior is rough. Engine is strong and car is fast.

Argh! You missed the big part, I need to see the liner screws

Save yourself the $130 and a trip to Autozone. The "bad" motor just needs to be cleaned out. Once thats done will work like new. I heard they even give you some money back if you bring back your "bad" motor. Makes sense , give a lifetime warranty. They will just clean your "bad" motor and give that back to you if you ever come back again, or just sell it.

Grabbed mine off Ebay for 30 bucks. Drivers side was dying

I get ot

Got a pare of pliers

So my dumbass decided to put a USA flag in my driver window and rolled it up so now my window goes up but wont do it automatic in one touch but it does do it when i roll it down what could it be? Please HELP!! Mines a g37 sedan btw