This is one best video so far. Thanks for showing how to do the puddle lights
@Speedycory6 Жыл бұрын
No problem! Gonna be uploading the RGB install soon too
@KJ-xw1ms Жыл бұрын
@@Speedycory6did you ever do a rgb install vid?
@Skyy30002 жыл бұрын
Yeah I know my next purchase.Clean af
@PabloRodriguez-cy6ge2 жыл бұрын
Bro, i just realized there was a smoked version of this 😮. I just recently ordered mine and now i will return it to get them smoked one. Thank god i saw this video haha. The smoked ones look waaaay better although the clear one’s might illuminate brighter.
@Speedycory62 жыл бұрын
Yes! The smoked ones look fire in my opinion 🔥
@Schizyy2 жыл бұрын
Where'd you guys order these from?
@Schizyy2 жыл бұрын
@@Speedycory6 ^
@Speedycory62 жыл бұрын
@@Schizyy DUNTUO Side Mirror Light Led Turn Signal Dynamic Sequential Blink Car Lights Running Indicator Marker Lamps for Infiniti Q50 Q60 Q70 QX30 QX50 QX60 QX70 [Smoked Lens] Left Right Assembly a.co/d/cjTXLki
@Q60TT Жыл бұрын
@@Speedycory6 I ordered this brand before seeing this comment and glad I picked the same one as you 😅
@juniormoreno198010 ай бұрын
My kit didn’t come with any blue wiring. Is it needed?
@johnmayo4889 Жыл бұрын
So when car is locked puddle lights stays on all the time. Is this with door locked or unlocked
@dahomiegerald2 жыл бұрын
damn i need that asap. looks dope!
@walterumana8116 ай бұрын
Heat the mirror cap with a heat gun or hair dryer gently not to hot and that will help with it not breaking
@israelsauceda5595 Жыл бұрын
What’s up man! Just ordered these I saw on 11:37 that you cut that white wire to go with the blue, so with the blue wire did you cut an open gap in order to get the white one in between? Asking ahead of time! Thx.
@Speedycory6 Жыл бұрын
Yessssir that’s it! To make it easier just cut the blue wire in half. Splice both ends, and then splice a single end on the white one and from there just twist the blue and white wire together with the second blue wire end.
@johnmayo4889 Жыл бұрын
Also the 2 blue connectors inside door...why are those disconnected, confused as to connection after wires are pulled thru upper door grommet,,,Can U help have sequentials on the way!!!
@Speedycory6 Жыл бұрын
You disconnect it in order to be able to pull them up throw the upper grommet and tape the wires for the sequential you are installing down that is it!
@spaceballs078 ай бұрын
How did you get the wires into the car (to the RGB controller)? Are the wires exposed when you open the door or did you route through the rubber wire boot?
@Speedycory68 ай бұрын
Mine are exposed but I wrapped it in electrical tape and this oem loom tape. a.co/d/1kaUgXn
@weirderspace76444 ай бұрын
Wired the blue for the puddles, worked for a little bit. But now my window is weak and wont roll up. Goes all the way down when I open my door have to close it from the passenger side when I get out and the puddle stopped working. Maybe it shorted something? Not sure need to rewire it.
@Speedycory611 күн бұрын
Did you hard wire it to the blue wire ? If you didn’t sometimes it gets loose and can cause a short in your Window switch and window actuator. You’ll have to get them both replaced. It happens on another q60 I had
@randomlybruh2 жыл бұрын
Is there a DDS light that comes on the dash after you installed the coilovers on the redsport? I currently have lowering springs but want to switch to coilovers.
@Speedycory62 жыл бұрын
Nope it doesn’t come on at all. I have no lights or anything on currently. And I’ve had it for about 2 1/2 months
@randomlybruh2 жыл бұрын
@@Speedycory6 nice that's awesome! BC coilovers right?
@Blasian_guy8 ай бұрын
I love the drl light but the fitment ain’t the best
@TehDayDream2 жыл бұрын
Why didn’t you go with the V2 mirror caps?
@Speedycory62 жыл бұрын
Got these ones for free 🫠
@budakai79962 жыл бұрын
Yo bro sick video so I had my lights installed. But I noticed today that I don’t have a white light it’s just the sequential with hazard and turn signal. They gave me back my old lights and in the box was the blue black white extension cords still wrapped up. Wtf 😑 did they fuck sumthing up or they just need to put the extension cord in? Any advice would help. Thanks again!
@Speedycory62 жыл бұрын
Yooo thanks brotha! And it sounds like they did not tape the blue and white wire because the red and yellow wire are for the Switchback(turn signal/hazards)
@totalq7242 жыл бұрын
Do you have the links for the sequential and mirror caps?
@kevingordillo6657 Жыл бұрын
They have them on southbayautoworkz
@jimmyt6379 Жыл бұрын
I wired it same way as you but I don’t know if I shorted something, my driver window goes down but won’t go up but all other buttons work on the switch even passenger window. Any suggestions? I’ve checked all fuses and window mower works
@Speedycory6 Жыл бұрын
Yea you actually shorted out the window actuator. It has happened to me as well but only with the RGB sequential. You have to replace unfortunately!
@jimmyt6379 Жыл бұрын
@@Speedycory6 thanks, I ordered a extra master switch cause I thought it was the switch, if that doesn’t work I’ll order a used window actuator.
@miguel-vx8ew6 ай бұрын
@@jimmyt6379any updates currently going through the same problem and i’m going crazy 😂
@jimmyt63796 ай бұрын
@@miguel-vx8ew yea it ended up being the window switch itself, I ordered a new one from eBay and swapped the switch and started working again
@miguel-vx8ew6 ай бұрын
@@jimmyt6379 can u share the window switch link u bought ?
@ahmedansari2704 Жыл бұрын
I got the driver side to work, I cant get the passenger side, what wires to use?
@Speedycory6 Жыл бұрын
It should be the same thing on the driver. Maybe one of the connections aren’t properly grounded
@ahmedansari2704 Жыл бұрын
@@Speedycory6 we gave up after 2 days and just ran a wire from passenger to driver side and hooked it up that way
@oscarpuente5865 Жыл бұрын
Bro what about the other side.? Is the same connection ?
@Speedycory6 Жыл бұрын
Yeap same exact thing Brotha. Same color wires and eveything.
@Angel-es3je Жыл бұрын
I only connected blue to purple and it didnt work
@Angel-es3je Жыл бұрын
for the drl was I missing a step or anything I should do? I did a t tap into the purple one I didnt actually connect it in the little clip
@imondutyy2691 Жыл бұрын
Bruh there’s is no way you gotta do all this🥲🥲I just order some M3 Caps and smoked sequentials😰
@x-cellentvi288611 ай бұрын
Ong 😂
@staylitt_exotics90512 жыл бұрын
beautiful ride …u gotta do a chrome delete asap!!!!
@Speedycory62 жыл бұрын
Thank you brotha! 🙌🏽🙏🏽 and yesss man I need to asap! Been saying the same thing! Hah
@IPLNando4 ай бұрын
Not finna lie I have a 2021 and this did not work 😢
@IPLNando4 ай бұрын
Q60 redsport 2021
@Speedycory611 күн бұрын
It probably a different harness than the older Q60s
@computerloveful10 ай бұрын
Don't waste time getting this product a simple plug and play is available no wiring on the side view mirrors