Infinity Cube Table

Рет қаралды 1,618,390

Күн бұрын

Support What We Do at The Katz-Moses Store kmtools.com
This week’s woodworking project is the Infinity Cube. I found a really cool way to cut the bridal joints without having to resent my equipment. Using only MDF and minimal measuring, this can cut repeatable bridal joints over and over with ease. I really can’t wait to see what you create! Let me know what you’d like to see next. Thanks for watching! Please like, comment and subscribe. Cheers!
----
*Check out OUR BRAND NEW STORE for tons of great Tools and Support the Katz-Moses Woodworkers with Disabilities Fund*: KMTools.com
Buy the Katz-Moses Stop Block: kmtools.com/collections/stop-...
Buy the Katz-Moses Magnetic Dovetail Jig: kmtools.com/collections/dovet...
*Buy the Katz-Moses Woodworking Apron*: kmtools.com/collections/workwear
----
Taytools is my favorite woodworking tool source: lddy.no/e90a
I have Walnut Slabs for sale: kmtools.com/collections/walnu...
BitsBits is the BEST place to buy router bits: bit.ly/BitsBits USE CODE JKATZMOSES15 for 15% off
Total Boat Epoxy: bit.ly/30bA39o 10% Discount code JKATZMO
----
Essential Woodworking Skills Playlist: • Essential Woodworking ...
----
Woodworking Routers Video Playlist: • DIY Router Table Build...
----
Woodworking Joint of the Week Playlist: • Woodworking Joint of t...
----
Woodworking in SLOW MOTION Playlist:
• Slow Motion Woodworkin...
----
Tool Tune Up Thursday Playlist: • Tool Tune Up Thursday
----
Check me out on social media:
jkatzmoses
www.Facebook.com/katzmoseswoodworking
patreon.com/katzmoseswoodworking
/ katzmoseswoodworkingshop
----
Tools I love:
My Apron: kmtools.com/collections/workwear
My favorite Dozuki dovetail saw - shop.kmtools.com/dozuki
My favorite Ryoba saw - shop.kmtools.com/ryoba
Marking Gauge: shop.kmtools.com/dbmk
Marking Knife: shop.kmtools.com/dbmk
NEW Suizan Flush Trim Saw: shop.kmtools.com/flush
Narex Richter Chisels: lddy.no/ussg
Knew Concepts Coping Saw (best deal I’ve found): lddy.no/120mz
Dewalt Planer Package: amzn.to/2thEf6O
CMT Chrome are the Absolute Best Table Saw Blades (JKM10CMT for Additional 10% Off)- lddy.no/ggf9
Great Small Tape Measure: lddy.no/120n2
BLEM Combination Squares (high accuracy and value at a fraction of the price due to cosmetic scratch): lddy.no/120n3
The ABSOLUTE best Sandpaper on the market: lddy.no/10ucv
Dewaxed Shellac Flakes: amzn.to/2FeqqYh
5 Minute Epoxy 10% Discount code JKATZMO: bit.ly/30bA39o
2:1 High Performance Epoxy 10% Discount code JKATZMO: bit.ly/30bA39o
Dewalt Trim Router: amzn.to/3Ay6c7D
Dewalt Full Size Router Kit: amzn.to/3FH8Njp
Dewalt Planer: amzn.to/2YSkpiS
Bosch 1.25 HP Colt Router: amzn.to/3DzNjmF
Bosch Edge Guide: amzn.to/2uRRKs2
Bosch Bushings Set: amzn.to/2JUNRYb
Centering Cone: amzn.to/2OjgOAf
MY CNC MACHINES (I highly recommend both)
Bescutter Laser’s Website: bit.ly/bescutter
Avid CNCs of all shapes and sizes: bit.ly/3cdKdqA
----
Camera Gear:
Lumix GH5-s and main lens: amzn.to/2J49F7m
30mm Macro Lens: amzn.to/2GJXtTT
15mm Lens: amzn.to/2NafUox
50mm Lens I use for product shots: amzn.to/2mehs5y
Microphone: amzn.to/2IGjKIa
Lav Microphone: amzn.to/2Nb8SzY
Gimbal: amzn.to/2s9ZV0F
2nd CAMERA Canon 70d: amzn.to/2FiCEDq
Tripod: amzn.to/2HasNvK
Slider: amzn.to/2oNucSd
24MM Wide Angle/Macro Lens: amzn.to/2oSzzjh
50MM f/1.8 for those tight shots: amzn.to/2tpAoVm
10-18mm Lens for the wide shots: amzn.to/2FZrhNM
Musicbed SyncID:
MB01UPHIXWOBRZ2

Пікірлер: 855

@katzmosestools 4 жыл бұрын

Get the Free Cut List and Plans/Cut List here - bit.ly/InfinityCubeCutListPlans My friend at Everything Wood and Metal has a great cube calculator if you want to do a different size than I did. Check it out here: bit.ly/InfinityCubeCalculator BitsBits is the BEST place to buy router bits: bit.ly/BitsBits USE CODE JKATZMOSES15 for 15% off

@robohjhonson3711 4 жыл бұрын

Jonathan Katz-Moses I’m first to ay hello!

@katzmosestools 4 жыл бұрын

I've gotten several orders from Canada today. Should be working.

@PaulChandler1951 4 жыл бұрын

Jonathan Katz-Moses my error. Thanks 😀

@hobesoundman8246 4 жыл бұрын

Build a second cube using the kawaii tsugite wood joint.

@arnaudamourette3342 4 жыл бұрын

En tenon mortaise on ne verrait pas de différence de teint ...

@jm_mort 4 жыл бұрын

I watch many, many makers on yt and this is one of very few pieces i could actually see myself buying. I love it.

@user-ri3sz5js6o Жыл бұрын

This is a valuable addition to my woodwork collection kzfaq.infoUgkxkNYRBJuiJ6EwD-tQSAlxg0eFKsnR2cgz I still will rate this woodwork plan as the best in my reference library. It always seem to stand out from the rest whenever you go through the library. This is a masterpiece.

@kingrobert1st 4 жыл бұрын

This the kind of table a magician could use! Impressive to say the least. Needs to be assembled in situ so you can transport it.

@JayBates 4 жыл бұрын

I honestly haven't found a better use for my stickers than this. The table is cool too ;) Kidding, that table is nuts!

@katzmosestools 4 жыл бұрын

Hahahaha thanks for getting high quality stickers. Those are the perfect thickness for shims.

@bobt2522 4 жыл бұрын

At 1:56, you can see the real use for a JKM sticker.

@doubledarefan 4 жыл бұрын

@@bobt2522 That's a business card. Probably 3 of them. He explained the reasoning behind it several vids back.

@ARFINAOFFICIAL_MUSIK 4 жыл бұрын

Kern

@hursteric 4 жыл бұрын

One of the coolest tables I have ever seen. I would love to try this one day.

@shanechepren8119 4 жыл бұрын

I really like the added “bits bubbles” while filming. Please keep that in future videos.

@katzmosestools 4 жыл бұрын

Yeah Marc killed that

@evelyn_r 4 жыл бұрын

I love the acrylic supports. They’re so discreet that I didn’t notice them without you pointing them out. And yet when you see them, they’re so nicely done that they’re a feature. 👍 awesome work overall 💖💖💖

@whoDatBeDare 3 жыл бұрын

100% Needs another 4 or 5 in the project to support heavy item on top.

@jasonnewton7953 4 жыл бұрын

Thank you for the free content. Just bought a slab of walnut this morning to take on this beautiful table.

@jagdishkrishnamurthy4867 11 ай бұрын

This table is really well designed. Every piece is clearly labeled, kzfaq.infoUgkxn94T8Mu1iMnsLCMNOI9srXSsLkI4JXKW and the instructions are perfectly displayed, so it's really hard to mess up the assembly. The hardware is likewise clearly labeled. If I had a power driver, assembly time would have been cut in half, but I didn't mind the light workout. My only qualm is that is that the lift top is wobbly in between its open and closed positions, but that's really a minor complaint. For the price, you really can't get much better than this, hence the five-star review. I use it primarily for my wireless mouse and keyboard so that I can use my PC from the couch. Storage is nice. I'm totally happy with this purchase.

@mariemacfhionghuin11 4 жыл бұрын

I'm really liking that garage riff goin on in the forward bits

@Sergey-wg7ne 4 жыл бұрын

This is amazing! I'm just a theoretical woodworker at this point, but if I'm ever getting my own shop, I'm definitely trying this. Very inspirational! Thank you for building and sharing this!

@Brough_builds 4 жыл бұрын

Amazing project, can't wait to give this a go

@TheLoyal76 4 жыл бұрын

That’s incredible,amazing, genius hands , mind and table , great job 😍😍😍😍💪💪💪💪👍👍👍👍

@MrGrant440 4 жыл бұрын

“ I wouldn’t sit on it”. That was great!!! That table is awesome!!!! Nice work!!

@reframeyourbody 4 жыл бұрын

Amazing job figuring this out! Great looking project

@hippoandbearmakes3416 4 жыл бұрын

Oh my word!! This is amazing!! What a cool table!! I want one!!

@daverobinson6384 4 жыл бұрын

That looks absolutely awesome! I’m going to have to have a go, though I think I’ll start with a cheap pine one before I waste my oak!!

@tacs_01 4 жыл бұрын

Very, very cool. Another thing to add to my list of outstanding projects!

@LosBestauradores 3 жыл бұрын

De verdad me encantan tus videos y edición! Ya deberías tener 1 millón de suscriptores hermano!

@katzmosestools 3 жыл бұрын

Muchas gracias mi amigo!

@jesuslopez4341 3 жыл бұрын

Es agradable encontrarte por aca mi estimado Jair. Supongo en certeza que le buscas a los videos para tratar de aprender algo novedoso como ésta hermosa mesita. En eso coincidimos. Yo con mis posibilidades me aviento a realizar proyectos vistosos y también de mi autoria. Y tengo bastantes pues ya mi trabajo de tablaroca y herreria lo derive a carpintería. Le imprimo mi estilo ultra moderno y los resultados me llenan de satisfacción. Y bueno ; aprendamos de todos y agradescamos los talentos externos. Como el tuyo....

@rickcox6728 4 жыл бұрын

Wow Jonathan, that's such an amazing piece. Love it.

@sgsax 4 жыл бұрын

I love Escher inspired designs and this one turned out awesome! Just imagining having to keep track of all those corners makes my head spin. Thanks for sharing!

@katzmosestools 4 жыл бұрын

We had to stop and 3d print that cube because I was so stuck hahaha

@whoDatBeDare 3 жыл бұрын

@@katzmosestools Yeah, I had to design in Sketchup Make.

@scottsimpey2965 4 жыл бұрын

Well that just kind of blew my mind. I had never seen much less heard of this “infinity cube” idea. Incredible table, it’s definitely a conversation piece for sure. Very cool.

@katzmosestools 4 жыл бұрын

Thanks my friend!

@davudinho23 3 жыл бұрын

@Caletova Radionica best infinity cube

@coloredcaboosecreations 2 жыл бұрын

What a gorgeous table! Thank you for sharing this build and the free plans you’re so generous this is going on my list of things to try definitely.

@GeertEshuis 4 жыл бұрын

Wow! This thing is just amazing. I was looking for something great to make for a friend, and I think I've just found it!!

@BradsWorkbench 4 жыл бұрын

This is one of your coolest projects imo

@katzmosestools 4 жыл бұрын

Thanks Brad!

@ThrownSparksGarage 3 жыл бұрын

Came out great! I built one out of Steel and used small bars to reinforce. I really like your idea for the cast acrylic to reinforce it but not be super noticeable!

@kevinr6236 4 жыл бұрын

YES! The Silicon Graphics (SGI) Logo. Awe, the Memories of my first Indigo and Octane.

@DavidLindes 4 жыл бұрын

I miss those machines... and that company!

@andiejoy5295 4 жыл бұрын

Wow! It’s gorgeous!

@michael2305 4 жыл бұрын

Wow, I have to say... I WANT ONE! AND BAD! Supercool table! Kudos for doin this!

@brickdaddiy 4 жыл бұрын

It's like the ultimate test of getting all angles square

@katzmosestools 4 жыл бұрын

Certainly was quite the challenge.

@o.g.bwoodwork 4 жыл бұрын

😂

@grumpyone5963 4 жыл бұрын

Once Upon A Workbench, Exactly that. I’m a steel fabricator and saw this cool table in the thumbnail. Enjoyed the video but there’s tolerance on tolerance on tolerance etc for it to end up right. I appreciate the difficulties in making this out of wood but an added complication to making this in steel is heat distortion with the sequence and direction of each weld possibly playing a part. Maybe one day I’ll have a go but in the meantime the guy has my respect.

@nomad8166 3 жыл бұрын

Lmaoo

@PostmanStudio 4 жыл бұрын

Really great design. Technical kowledges is an important thing, understanding what is a great design or not is even more important. Thank you to share both of them!

@WoodenItBeNice 4 жыл бұрын

Hi Jonathan, That has to one of the best projects I have ever seen built. Fantastic. Heading over for the "plans" Cheers, Huw

@pacojerteunchingo 4 жыл бұрын

Sick table!! Love it! Can't wait to give it go

@rendel5024 4 жыл бұрын

I'm new to welding and plan on doing this with steel. I don't want to waste steel, and have a bunch of round material. I'm going to give it a go, thanks for the video, it's helped.

@tim8468 4 жыл бұрын

That was very cool. Great work on a beautiful table.

@IntoTheUnknowN- 4 жыл бұрын

Now this is an amazing project!

@AndreaMerchak 4 жыл бұрын

That's really cool! I wish I could have one! I loved it!

@JkCanvas 4 жыл бұрын

Amazing job making this table. Always a pleasure watching you work and learning how to make cool projects.

@harrydavis6903 4 жыл бұрын

Awesome with a capitol Aw!!! Well done, Jonathan. Very nice.

@theawesomer 4 жыл бұрын

Really cool build! Sharing on The Awesomer.

@edski24 4 жыл бұрын

I made the frame today ! Glue & screws for me did the trick. Thanks for the idea & inspiration

@graham8854 4 жыл бұрын

Love it. Wish I could add two thumbs up. Going to try to make this myself.

@paul-ld9vh 4 жыл бұрын

That's outstanding! Love the geometric look as well as the fit and finish!

@katzmosestools 4 жыл бұрын

Thanks bud. This was a fun one!

@jeffchockley2673 4 жыл бұрын

Thank you for this video ! I am gonna try this . Going with some poplar that i had in the shop to see if i can figure it out. Got everything milled today. Will work on the bridal joints tomorrow. If i can get it figured out and it comes out in good shape i will get some walnut and do it again with that. I also thank you for your new deal with us handicapped woodworkers. I have an eye disease called Retinitus Pigmentosa. It effects periferal vision at first . Then slowly progresses to total blindness. I am still blessed with enough sight to do most of what i want to do. Still have a full time job and work in my shop. I just can not drive. Anyway thank you very much for your caring and all of your teaching here on line !

@HaveAnother2588 4 жыл бұрын

What a great idea for a table, this is really cool

@toddratson7526 4 жыл бұрын

The stickers to provide clearance was clever. Logged for future reference.

@Oscar-xj1xk 4 жыл бұрын

Brilliant, another awesome project!!! Thank you for sharing!

@katzmosestools 4 жыл бұрын

My pleasure bud! Thanks for watching!

@1stdecondivineusher914 4 жыл бұрын

Mmm that would look awesome in black with a infinity mirror with LED lighting on top😉 ✌great video thanks for sharing👍

@Andy_Panda 4 жыл бұрын

An amazing design. Would look cool with contrasting dowels through the bridal joints.

@selfmadeworkshop4324 4 жыл бұрын

Man! That's gorgeous 😍

@rcringwall 4 жыл бұрын

Thank you for the plans.. this is awesome.

@ArmyVet76 4 жыл бұрын

Amazing job. Love this to the extreme. Now the wife wants one thanks 😂

@FishersShop 4 жыл бұрын

That turned out awesome! Love it!

@katzmosestools 4 жыл бұрын

Thanks Drew!

@anitakalgapurkar8025 4 жыл бұрын

Very imaginative . Beautiful table.

@SteveC38 4 жыл бұрын

That Came Out Great Jonathan!

@marcmedeiros8857 4 жыл бұрын

Mind blown, great job as always!

@blackflycanada4943 4 жыл бұрын

This table with some of your incredible dove tails would set it apart! Very nice work!

@ronjaybarnett 4 жыл бұрын

Beautiful done thank you for sharing it with us.

@evanmccrindle5355 4 жыл бұрын

Wow that thing looks awesome

@billqqq 4 жыл бұрын

Adding this to my build list for sure. Two end tables and a coffee table to match. Excellent project!

@katzmosestools 4 жыл бұрын

Send pics when you finish!

@Tinker1950 7 ай бұрын

Well, did you build that project?

@billqqq 7 ай бұрын

Shortly after, I had to pack up my shop and move, have been without my tools and shop ever since :(, but this is still on my project list. I hope to have my new shop built in the spring, we'll see...

@Tinker1950 7 ай бұрын

@@billqqq I asked because whilst I think it's wonderful project, I also think it's a huge step for the average garage woodworker. Even a skilled Sketchup user would find this a challenge - jigs, bench mounted routers, router templates, glass to order and get correct. But, the result can be stunning. I really would love to be able to make something so good looking.

@martz5533 3 жыл бұрын

@caletova radionica

@professordeb 4 жыл бұрын

Haven't even started watching the video and I can tell this is pretty darn awesome!

@jasonnewton7953 4 жыл бұрын

Thanks for the plans! Just got my cube glued up. Everyone that seen it loves it. Thanks again.

@katzmosestools 4 жыл бұрын

Send pics my guy!

@jasonnewton7953 4 жыл бұрын

@@katzmosestools where do I send pics.

@tommykniest8231 4 жыл бұрын

Absolutely amazing. Great build! And I'm stealing that router table jig for my bridal joints in the future. :-)

@FurnitureFlippingForProfit 2 жыл бұрын

Love it! Great job and thanks for the free cut list! You are the best!

@user-qg6fy4yp8t 4 жыл бұрын

Just beautiful!!

@rons8900 4 жыл бұрын

Wow! Design and craftsmanship outstanding.

@pettigrewwoodworks 4 жыл бұрын

Looks awesome once the finish is on and the joints show!

@jasondoust4935 4 жыл бұрын

This table blows my tiny mind... Awesome work, JK-M and JB. (Awesome is a word I use sparingly, BTW, like Dylan Moran.) And in response to a glue comment before, yep, glue the hell out of those bridle joints. With the strongest stuff that you can find. So many joints under tension, flexion and shear in that job!

@timthomas9105 4 жыл бұрын

When I get my home shop set up. I will have to give this a try. I may like a challenge, I really hope I'm up for it. The only thing that compares is when my oldest brother drew a picture of stairs going in every direction. Then he added people, a basketball, planters, a cat being chased by a dog and so many other details. The spacial rendering was so distinct. It was a work to study. I could see your cube interior being filled with intersecting lines like his staircase. You really stirred up a memory. I was 10, so he must have been 15-16, over 45 years ago.

@katzmosestools 4 жыл бұрын

Sounds super cool!

@Shadobanned4life 4 жыл бұрын

Sir, I think your work is impressive and amazing ! Thanks for putting something interesting and different on YT !!

@randallj1291 4 жыл бұрын

I totally pictured you carving this out of some stump when I seen the first picture

@tarik4426 3 жыл бұрын

Like ko gleda poslije caletovog klipa!!! #BALKAN 😂😂💪👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

@ljubibrat0778 3 жыл бұрын

Jajajajaj

@sergejvidovic6249 3 жыл бұрын

Malo iskopirao

@tarik4426 3 жыл бұрын

@@sergejvidovic6249 da da haahahaha😂

@davidburns1753 3 жыл бұрын

Cock-a-doodle-doo ... trumpty dumpty had a grate fall

@lando_jm4609 4 жыл бұрын

Such a cool project, absolutely love it!

@katzmosestools 4 жыл бұрын

Thank you so much!

@mauriceryton 4 жыл бұрын

That is a beautiful piece of furniture.

@keithboaz9065 4 жыл бұрын

Truly a beautiful piece

@norm_olsen 4 жыл бұрын

Very cool! This is my favorite thing you made to date! Well done! :)

@FB_Woodshop 4 жыл бұрын

Beautiful work! Truly art

@tozinho1234 4 жыл бұрын

Awsome. A Silicone Graphics table. Loved it.

@DavidLindes 4 жыл бұрын

Silicon, not silicone, but yes. :)

@gabesmith6475 4 жыл бұрын

That’s crazy! I’d love to make one of these!

@istvandeak8232 4 жыл бұрын

I've built this for my former boss around last year and I loved this puzzle, but wasn't too hard! :) very glad to see someone else recorded it and gave it to other ppl!

@whoDatBeDare 3 жыл бұрын

planning on thick acrilic supports. What does washed together mean?

@spencerbass7142 4 жыл бұрын

My head would have exploded trying to figure it all out. It looks great.

@blackshield1000 4 жыл бұрын

This table is the coolest thing i have seen man .. keep up the great work 👍

@emilylindstrom724 4 жыл бұрын

It's the Katz-Moses Mobius-Cube! Awesome. I want one!

@FredMcIntyre 4 жыл бұрын

Really cool piece, awesome work Jonathan! 😃👍🏻👊🏻

@ToffeenoseToffeenose 4 жыл бұрын

Great design, great video, great craftsmanship

@merfolkSlivers 4 жыл бұрын

The real shenanigans is the clamping hardware you have for this. I especially loved the Swiss Cheese and the 3D-printed "squares" during the earlier part of the gluing step. The best tools are the ones you make your own!