Didn't get passed the intro, I already like this dude. +1 to subscribers
@FerencHarcos3 жыл бұрын
Great job. Thanks for the double side patch recommendation.
@govnrbill35 жыл бұрын
I hope I never have to do that. It looks worse than you described. Good luck with the repair and my wife and are looking forward to the next episode! We always like to see the good with the bad.
@GroomsJk5 жыл бұрын
I have a Klepper that has a cut in the hypalon hull. This is the best vid I have seen on patching with two part adhesive. Thanks - J
@caseyjones74044 жыл бұрын
You don't need to part adhesive, 3M 4200 would do the trick permanently
@SVSecondChance3 жыл бұрын
Thanks for the help I am in need of patching my carabi so thanks. You have been a big help to us and we absolutely appreciate it.
@jamesdrive8083 Жыл бұрын
Thanks for the informative video, no waste o time.
@kuang012 жыл бұрын
Doing this in the water, amazing!
@gunznknives4 жыл бұрын
Nice job. I used Tear Aid to seal the inside of the tube. Then applied a bead of 3M marine sealant to the tear. It was a "T" shape rip and I needed to keep it from separating. I'm putting on another piece of Tear Aid on the outside and then a PVC patch with adhesive. Good detailed video.
@caseyjones74044 жыл бұрын
3m4200 or 5200? Both are THE best
@edwardwerthner77175 жыл бұрын
Great repair video Thx , it’s happened to also. West marine sells a liquid sealant for all inflatables which I used as an added insurance After my repair. Thank God no leaks . Check it out , it’s expensive
@SailingSatori5 жыл бұрын
Nice... I’ll check it out!
@Obliticus Жыл бұрын
Hypalon and PVC have different specific adhesives and thinners. For example, Toulene for Hypalon, MEK for PVC. Also, if you do accidentally touch a small spot when trying to position the patch and cannot get it to release, a simple dip of the brush in the appropriate solvent, and work it against the stuck part, and it will come free to reposition.
@frickandfracksicem4 жыл бұрын
Hypertex is different. work in the shade or early morning before any heat from the sun. Lint free cloth wipe patch area three times 5 minutes apart with Methyl Ethel Ketone M.E.K. First pass removes oxidized surface, second softens, third wipe with a new clean towel each time, prepares the surface. Next, mix 1/3 weaver with 1/3 hardener and 1/2 OZ (shot glass) of toluene, I mix with a bent coat hanger on a drill, about 5 inches long with a (L) bend. On really hot days I use more toluene. Use the brush three times to apply glue to all surfaces 5 minutes apart, (use egg timer) be exact, really thin. If the glue dries too fast after prep, wipe with MEK once and get the patch on within 3 minutes, work fast, be firm and I personally use a car tire repair roller. Do not use the boat for a week, do not air up over 1 psi, Caution the fumes inside the boat are extremely flammable, so I let the air out to 50% and pump in good are several times over the course of 4 days.day one do nothing. Never let the boat deflate all the way. I have a leak at my transom at the port side where the floor meets, will be cutting access opening to patch the transom leak, access point will be 12-14 inches forward of the port tub and the access will be at 10 to 11 o'clock, elbow size, help is required to keep the tube inflated- this technique is kinda like Arthroscopy surgery. interior patching is easy.
@luisgcasiquet3 жыл бұрын
Great video!
@floathi5 жыл бұрын
And now an expert on inflatable repairs. Thank God the drop kick wasn't in there.
@ehabmourad23262 жыл бұрын
You are really a professional person. Can you send me the type of glue and how to use it, I will be thankful
@Scramasax5 жыл бұрын
I really really really keep my fingers crossed I don't ever ever ever need to do that!!!
@vincentjanse Жыл бұрын
I'm dealing with a ripped inflatable bed. The inside patch thing is so smart, why didn't I think of that.
@LIamaLlama5545 жыл бұрын
Thanks for this. Great informative video.
@SailingSatori5 жыл бұрын
Thanks Rory. I did another patch last week... had to watch my own video to remember how 😂
@gasgiant71224 жыл бұрын
I'm in UK, what a nice place you have to repair a dinghy, does this method work in sub zero temperatures with hale and wind? Ha ha, great repair, hope you had sun cream on?
@sailingonanimpuls67133 жыл бұрын
We recently got a ‘big ass tear’ in our dinghy and felt really discouraged on doing it ourselves until we saw this video. Thanks so much for sharing! Can you share how this has held up for you?
@jaaebeeee3 жыл бұрын
can i use the same glue for my pvc boat?
@svdoinitright75195 жыл бұрын
I was watching the part on getting the air bubbles out, thinking that perhaps a fin roller for fiberglassing would be the ideal tool.
@SailingSatori5 жыл бұрын
Possibly, but it may require a lot of pressure. The metal 7-in-1 tool worked, but was a little harsh.
@andrewfreeman885 жыл бұрын
Just use an old spoon and work all the areas from center out...
@onthebeaches5 жыл бұрын
Great tips Nick...you're my hero! PEACE OUT! Ü
@RykeEdwards5 жыл бұрын
Good job Nick 😀👍
@ribfix5584 жыл бұрын
Tolulene is the preferred solution on hypalon, on pvc mek is required tolulene isnt ideal, m.e.k will soften the surface of pvc allowing the glue to make a chemical bond where as tolulene will not..ta
@ehabmourad23262 жыл бұрын
Very excellent. Can you send me the type of glue and the model or specifications of the glue?
@mnnchalaybysamarirfan99783 жыл бұрын
Great ....I also patched my rubber boat in a simple way
@brandonbrown47863 жыл бұрын
Can you use the same method when patching a hole the size of a half dollar maybe a little smaller I’m having a hard time trying to patch mine I think the next approach is an inside patch but mine is a hole not a tear
@barrientosjl3 жыл бұрын
Hi! I saw you used the Weaver Adhesive. How does it work so far? I want to use it to fix a 8" open seam on my Sea Eagle inflatable kayak. My kayak only requires 3.2 psi so I hope the adhesive on the PVC can hold that pressure. Any recommendations or ideas would be great.
@SmartLearningAI5 жыл бұрын
Excellent, found the glue but not the tape roll. Have an amazon gear link perhaps?
@GabGCC4 жыл бұрын
Why glue and not pvc liquid fir the pvc liners?
@yehudabendavid48362 жыл бұрын
I want to replace all the Hyperlon in my boat. You may know a company that does this. I would be very happy if you could help.
@samm88663 жыл бұрын
does this work for tears under the raft, where it is in constant water contact ?
@SailingTanker5 жыл бұрын
Gental docking procedures from now on. Especially during rough conditions, right Crash.....
@SailingSatori5 жыл бұрын
That sounds boring.
@ARI-og5ze2 жыл бұрын
the translation to Arabic it's great idea but there's some words 🤣
@chiefcliff5 жыл бұрын
I would be very worried about leaks around the tube seam that the patch went over. I kept waiting for you to comment about that seam. Doesn't the seam create a small pocket for that air can escape from? It seems it would be hard to form the patch completely around the seam.
@SailingSatori5 жыл бұрын
I though of that when I was doing the repair, but there was just enough space between the tear and the seem to make a seal. Surprisingly, the patch laid quite nice over the seam... 6 months later, that is the tube that holds air the best.
@dl68654 жыл бұрын
This process is extremely lengthy. Does it really work? 2 pack glue usually dries hard. My “go to” vinyl glue is HH66.
@SailingSatori4 жыл бұрын
Don’t know anything about HH66, but this repair has lasted almost 3 years with no leaks. Rock solid.
@laurentfroggy66315 жыл бұрын
Hmmm, didn't King Arthur already showed that video? He even told you guys what to do in the previous vid..... best from HKG
@yehudabendavid48362 жыл бұрын
I search and can not find
@tomtrump94245 жыл бұрын
Great video. (but your solvent name is pronounced Tol-you-een)
@SailingSatori5 жыл бұрын
I know... you’re not the first one tell me. Thanks for watching!
@KoolMutualAids5 жыл бұрын
But did you try slapping on some flex tape with the might of Zeus? (Also fun fact this was uploaded on my 25th birthday =P)
@MargoLouiso5 жыл бұрын
Do not use flex tape on inflatable boats! We tried it on our pvc inflatable kayak. It rippled and the glue oozed out to a sticky mess nightmare. Took a ton of "glue be gone" once we easily pulled off the tape, and weeks of rubbing. Then we patched it the correct way with marine products.
@rastagrastag94964 жыл бұрын
Anyone ever tell you you look like Kenny Chesney
@SailingSatori4 жыл бұрын
Well... more like Chenny Kesney
@tomwilliams86755 жыл бұрын
What about the King!
@SailingSatori5 жыл бұрын
I tried to put him inside the tube... but Kelly said no.
@geneberry71145 жыл бұрын
The King seemed quite bored with your narration in the cabin Nick. Perhaps he is still plotting revenge.
@SailingSatori5 жыл бұрын
Seriously! 😨
@billsmith50425 жыл бұрын
Yeah, I was 'gonna say, Poor Arthur, so neglected.....lolol
@drlangattx3dotnet2 жыл бұрын
very poorly shown. You explained it somewhat but displaying exactly how you did the inside work was not good at all.