INGCO Water pump and Automatic pump control UNBOXING

Рет қаралды 35,880

2 жыл бұрын

Unboxing the INGCO Water pump VPM 7508 (750W, 1 HP)
Unboxing the INGCO Automatic pump control (10BAR, 10A)
Being use to the city life and having water pressure was a big adjustment and I was never willing to have such low pressure forever so I needed to find a way to get some decent water pressure here on the farm.
www.loveyourhealth.co.za

Пікірлер: 23

@brynhart9108 2 жыл бұрын

The pump works perfectly, watering the veggies and having a decent shower will now be easier and better!

@riyaazanthony2677 6 күн бұрын

Does it still work

@brynhart9108 6 күн бұрын

@riyaazanthony2677 yes, it does still work.

@edwinnetto6248 Жыл бұрын

Prices have increased substantially!!

@jonsigi1 Жыл бұрын

i have purchased 3 INGCO pump control unit and the water tastes and smells like burnt plastic. How do we solve this?

@brynhart9108 Жыл бұрын

burnt plastic I would guess you ran it dry? if its burnt plastic and you did not run it dry I personally would have sent it back for a different one. if its just a plastic taste just run it through the taste and smell should pass after a while.

@causeformayhem 2 жыл бұрын

where's the installation video

@brynhart9108 2 жыл бұрын

Sorry Bru, lost my hard drive due to eskom. footage was lost, was pretty easy though.

@eprohoda 2 жыл бұрын

Like it!insane !see u arund.

@phongvuong2323 10 ай бұрын

can we adjust pressure on/off?

@brynhart9108 9 ай бұрын

I have the same problem, it seems the pump regulates itself automatically which doesn't work with my low pressure pipes so I've just been switching in on and off as needed manually

@chiquitodiwas8787 8 ай бұрын

are ingco tools made in China?

@MrCks1989 2 жыл бұрын

Hoe het die pomp toe gewerk? Sien nou daai maak orals. Sal goed wees om te sien hoe als werk. Groete

@brynhart9108 2 жыл бұрын

Ekt eers besig geraak met heinings opsit so ongelukkig nog nie by dit uitgekom nie, ek sal n video van dit ook oplaai!

@brynhart9108 2 жыл бұрын

Hy werk baie nice!

@hudaalkaabi4274 Жыл бұрын

Joined United States

@rolandmillam2355 Жыл бұрын

I just installed my pump but it is showing red light "failure" help me please AUTOMATIC PUMP CONTROL (10BAR) Voltage: 220-240V~50/60Hz Max current: 10A Starting pressure: 1.5bar Max pressure: 10bar Pipe diameter: 1″ x 1″ Protection degree: IP65 PERIPHERAL WATER PUMP Voltage: 220-240V~50/60Hz Input power: 550W (0.75HP) Max head: 45M Max flow: 45L/min Max suction: 8M Pipe diameter: 1″ x 1″ Copper wire motor Brass impeller 0.15m length cable

@brynhart9108 Жыл бұрын

It's really hard for me to guess the exact fault without bveing there. you'll need to look for the problem. Start at the most obvious like and then move towards the more complicated faults. Here is a link that might help: www.iwaterpump.com.my/index.php?route=information/information&information_id=11

@robinhardware2346 4 ай бұрын

Is this true ?