Making a dovetail box... like a machinist!

Рет қаралды 398,453

Күн бұрын

To try everything Brilliant has to offer-free-for a full 30 days, visit brilliant.org/Inheritance. You’ll also get 20% off an annual premium subscription. This video was sponsored by Brilliant.
Shout out to Rowan @noengineerhere for finally overflowing my shame capacity of the Box of Shame with your fanmail. The box said, “Yum!” Now, to make room for some more of my future foibles… Let’s make a bigger box!
#inheritancemachining #machineshop #hobbymachinist
Patreon - / inheritancemachining
Drawings Store - inheritancemachining.com/?pro...
Merch - inheritance-machining.mysprea...
Instagram - / inheritancemachining
Amazon Store (affiliate) - www.amazon.com/shop/inheritan...
Thank you again to the Micrometer level Patreon members listed at the end of the video!
TIMESTAMPS
0:00 Special Delivery
1:18 Loose Premise
2:28 Let’s Get Physical
5:44 Woodn’t It Be Nice
7:49 **Precisely 15 Degrees
9:33 Wrong Brain Mode
11:09 Exactly Incorrect
14:17 I’ll Tell You When You’re Older
16:00 Gratuitous Milling and Drilling
17:25 What Come’s Around
18:15 Screw It
19:53 Wewd
21:51 Fire
22:35 More Sticky
26:07 Wait For it…
FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
www.epidemicsound.com/track/S...\
• Making a dovetail box....
© 2024 Inheritance Machining, LLC. All Rights Reserved.

Пікірлер: 1 200

@InheritanceMachining Ай бұрын

To try everything Brilliant has to offer-free-for a full 30 days, visit brilliant.org/Inheritance . You’ll also get 20% off an annual premium subscription. This video was sponsored by Brilliant.

@Culpride Ай бұрын

That sponsorship segment was ... well, brilliant

@thatoneguy8371 Ай бұрын

Now where’s mine

@lourias Ай бұрын

You took a support from a turn -of-the-ceutury Collapsible Wardrobe!! Why?

@aserta Ай бұрын

27:44 It's Canadian!

@sebbes333 Ай бұрын

26:13 Please do NOT use a *rotary sander* on wood, especially not on the places that are supposed to look nice. You should use a *belt sander* or something that *sands in a linear fashion,* and then you sand along the grains. When you use a rotary sander, it leaves circle scratches in the surface, that are always visible, even at 1000+ grit paper, but if you use some "linear sander" the scratches hides along the wood grains & can't be seen, especially when the grit is finer than the wood fiber. but if you sand across (or rotary) those scratches is always visible.

@NoEngineerHere Ай бұрын

Don't worry buddy, I measure my wood to the thou as well. You gotta take what you can get.

@Mika10 Ай бұрын

How have you commented a day ago🤨🤨

@NoEngineerHere Ай бұрын

@@Mika10 first

@vilian9185 Ай бұрын

@@NoEngineerHere LOL

@ferky123 Ай бұрын

@@Mika10 there's a reason why he's poor.

@scagmo_au Ай бұрын

Lads, this crossover is everything I didn't know I needed ❤

@usualatoms4868 Ай бұрын

I admire your optimism in making the box so small.

@J.C... Ай бұрын

🤣👌

@camz8755 Ай бұрын

My thoughts exactly

@BetweenTheBorders Ай бұрын

Yet perfectly sized to contain the old box. Not the contents, the box itself.

@Phonophobia Ай бұрын

The DIN is getting into him... The next one is gonna house this one perfectly and so on :D

@marsrover6121 Ай бұрын

In about a year hopefully he won't be making a crate of shame

@89sirmonk Ай бұрын

I hate glue. It gets everywhere. Proceeds to apply glue like an unsupervised toddler pouring maple syrup on his pancakes.

@oliverer3 Ай бұрын

Certainly gives context for the previous statement. xD

@InheritanceMachining Ай бұрын

👶

@ebco756 Ай бұрын

Wear gloves!!

@Tawnos_ Ай бұрын

@@InheritanceMachining cheap brush, dip pot, or double chamber glue dispensers helped me solve a lot of my issues with drips and glue. The amount of glue you applied would be like brazing together two 1/8" thickness, 1" ID steel tubes with 5 brass brazing rods. Inevitably it will overflow. If you hate woodworking but want to level up your gluing easily, just pour the glue into an intermediate vessel and use a cheap flux brush to apply it to both surfaces rather than pouring an eighth inch puddle along the edge :D

@89sirmonk Ай бұрын

@InheritanceMachining meant in good fun. I do enjoy your videos and some of your tool concepts. Thinking outside the box is the key to a craftsman. Even if it ends up in the box. A very nice box.

@AriManPad8gi Ай бұрын

"instead of becoming a better machinist, i'll make a bigger box" LMAO priceless

@nickthorp1624 Ай бұрын

That needs to go on a tee shirt :D

@whitec21 Ай бұрын

Look, just because I know exactly how a rotary broach works doesn't mean it's not wizardry.

@adrianblack7966 Ай бұрын

Exactly, it just means we're wizards.

@-pickle-4726 Ай бұрын

I wanna be a wizard.

@helplmchoking Ай бұрын

It's like complicated code, or flight, or electricity. I know it's real, I know how it works, and it's all still magic

@ssberserker1488 Ай бұрын

I kinda feel the same way about some thread mills. I get how it works and everything now, but sometimes I still can't help but think "Black magic fuckery..."

@TheKids-yz7ox Ай бұрын

all hail the wizard

@Serenity_Dee Ай бұрын

The upside down letter/backwards speech gag just made my morning.

@Franklin_Johanessan Ай бұрын

I thought my brain stopped working 😅

@rhetorical1488 Ай бұрын

we are here for the quality of the content and commitment to the bit😊

@DamienDarkside Ай бұрын

Everything being upside down in Australia is one of my favourite jokes, along with dropbears.

@laserbeam1620 Ай бұрын

Very clever!!

@Doomsday_Report Ай бұрын

@@DamienDarkside Dropbears aren't a joke, they got my aunt just last year, we're still looking for some of the pieces.

@dieselrugg Ай бұрын

"he's a big wood guy...he also likes woodworking" LMAO!

@RENO_K Ай бұрын

U forgot the "unlike me"

@scottevans1392 Ай бұрын

"It lives in the barn because its intimidated by my surface grinder". I laughed so hard!

@sirduckington5641 Ай бұрын

24:14 "Gonna build a window just to yeet you out of" God damn that made me crack up

@tooldog212 Ай бұрын

shit had me laughing so hard

@dan3a Ай бұрын

The whole mental breakdown part was hilarious, but wish he doesn't get any more of these 😂

@kiviknuuti1538 Ай бұрын

"I'm not a woodworking guy" --> proceeds to have a lot of special woodworking equipment

@InheritanceMachining Ай бұрын

doesn't mean I like it 😆

@alexperry5264 Ай бұрын

"But hey, in the world of hobby woodworking, one man's barn scraps are another man's barn scraps." So true.

@Serenity_Dee Ай бұрын

The state of those woodworking power tools makes my woodworking soul hurt.

@InheritanceMachining Ай бұрын

Trust me, it hurts mine too. But it would hurt more if my machine tools sat outside haha

@Serenity_Dee Ай бұрын

@@InheritanceMachining I mean, fair, your grandfather's big machines are definitely far more precious than the woodworking tools you showed here. It's just that my first crafting love is woodworking, and I wish deeply that I had a woodshop with such tools.

@gabrielarrhenius6252 Ай бұрын

@@InheritanceMachining time to build a cargo container for them and your occasional woodworking

@SharkyMoto Ай бұрын

i miss the drawing board, bring it back. CAD is awesome, for the very reason you demonstrated, but i LOVED how you would design the stuff on paper

@thechadwick22 Ай бұрын

Drafting table is what I'm sure you're talking about and 2nd from me!

@dirtfarmer7472 Ай бұрын

Yes I agree with you I like the drawing & figuring things out 1st. Anybody can do CAD, where’s the fun in that

@InheritanceMachining Ай бұрын

It's not gone forever! Just some projects require the faster CAD

@UlrichWulf Ай бұрын

@@InheritanceMachining Be that as it may, letting us look over your shoulder while you explained the drawing, informed the whole following video. After that, we could understand, what was going on every step of the way. Here we see just a bunch of beautiful parts we have no idea how they're going to fit together one fine day. Even doing it with CAD would be a lot better than not doing it at all.

@dirtfarmer7472 Ай бұрын

@@InheritanceMachining I like the idea of cad, cardboard assisted design, that’s the kind I would do

@robster7787 Ай бұрын

I CANNOT believe I just now discovered your channel only because of a small “Box of Shame” gag from “Not an Engineer”. But to be fair, I’ve just recently discovered his channel like a couple days ago. As a fellow engineer, you’ve got a new subscriber

@Volern Ай бұрын

I love the subtle nods to show how you designed the box to not only perfectly fit the old box of shame but to also snugly fit in the rim of the table it was placed on. Very nice

@InheritanceMachining Ай бұрын

The only 2 real requirements honestly haha

@lourias Ай бұрын

I noticed that perfect fit, also

@evilotis01 Ай бұрын

"the age-old 'she'll be right'" as another Australian, i can confirm that this is 100% true

@Vision-xf8gl Ай бұрын

On the fly design by a machinist, when a sneeze or a brainfart makes the logical and even 15 degrees or 1" into 14.25 degrees or 0.9527" Love it.

@clapanse Ай бұрын

For future glue-requiring projects, you can get 30 minute set time epoxy as well and it makes assembly a lot less stressful, as well as actually being slightly stronger once it fully sets.

@InheritanceMachining Ай бұрын

where were you last week? 😂

@JTCF Ай бұрын

The box of shame almost ended up being an item of shame too, how ironic and poetic.

@ubertalldude Ай бұрын

The cameo in NotAnEngineer's last video cracked me up. Great work!

@InheritanceMachining Ай бұрын

😂 Thanks!

@lourias Ай бұрын

Yes, when I saw NotAnEngineer's nod to The Box of Shame on his video, I chuckled, a whole lot. I knew where it was going.

@tdg911 Ай бұрын

That has got to be one of the prettiest boxes I think I have ever seen. Your work and craftsmanship is truly exceptional.

@InheritanceMachining Ай бұрын

thank you very much! It's certainly the nicest box i've ever made!

@shikutoai Ай бұрын

Something I find immensely wonderful about every one of your videos is that every intro with the splash music is customized with B Roll from the video in question. It's a special attention to detail that I love.

@InheritanceMachining Ай бұрын

thanks for noticing 😊

@99seaweed Ай бұрын

I'm sorry I'm going to need an explanation? The B-roll of which video?

@shikutoai Ай бұрын

@@99seaweed So, for example, in this particular video, from ~ 0:51-1:20 all of the footage is B Roll that was filmed during the creation of this video. If you go watch the video for the knurling device, the same section of the video - the “opener” - uses B Roll from the creation of that tool, and so on.

@shikutoai Ай бұрын

Each video IM produces has the “intro” with B Roll from the production of that video itself

@99seaweed Ай бұрын

@@shikutoaiOooohhhh. Thank you.

@nitroboibg Ай бұрын

that little bolt snapping at the last possible moment has to be the greatest comedic timing on this whole project haha

@Horus9339 Ай бұрын

A finer chest has never been seen, the box wasn't bad either. Thank you IM, once again a really well produced video. Have a great weekend guys.

@InheritanceMachining Ай бұрын

That just got an audible laugh from me 😆 Thank you and you as well!

@sonicsphincter6 Ай бұрын

Craig being a big wood guy was a quality joke my dude.

@InheritanceMachining Ай бұрын

😎

@gogogadgetearl Ай бұрын

I love how the dark and light metals look vaguely like teeth.

@RCake Ай бұрын

Thank you so much for sharing the genesis of this wonderful marvel of a box 🤩🤩 Not sure how many people have already said it before, PLEASE protect your skin when using epoxy. Nitrile gloves are an absolute must. You can remove / inactivate any accidental smears with vinegar. Epoxy skin exposure will lead to contact allergies, and you do not want those.

@owngamesgamer4030 Ай бұрын

the noises you made durning the box assembly especaly "sticky" were so cute

@dythe7858 Ай бұрын

The box of shame is no longer hidden and is now watching you (with a superb view) Be careful now that you have a bigger box, you might be tempted to feed it bigger things 😂

@InheritanceMachining Ай бұрын

Don't you dare say that! 😂

@JTCF Ай бұрын

I did not expect we would get such a collab! Wonderfully executed overarching cross-channel narrative!

@rocksocar Ай бұрын

The montage of you going vaguely insane at the glue is so relatable for anyone putting 110% into a project and nearing the end. Thank you for sharing

@TheThirdPrice Ай бұрын

I've never been so excited to see a box with googly eyes

@Hexagonaldonut Ай бұрын

That box really is gorgeous! A lot of effort, certainly, but I'd say the Box of Shame deserved it.

@InheritanceMachining Ай бұрын

Thank you!

@marcshapiro7317 Ай бұрын

you should melt them into a mystery alloy and make a trophy from it

@brandondoucette Ай бұрын

“That was probably the clamp I threw across the shop” 😂😂

@vandemonian5412 Ай бұрын

The irony of making a box-of-shame to be proud of, is not lost on me.

@M00NM0NEY Ай бұрын

No one expected that Brilliant ad 😂

@InheritanceMachining Ай бұрын

Not even me...

@KnugLidi Ай бұрын

@@InheritanceMachining Ad or abs ?

@jonathanolson2263 Ай бұрын

My tool box has what I call the scrap drawer, and some days the scrap drawer runneth over

@Buschkraft_Boy Ай бұрын

THAT is the most beautiful l box i have EVER seen! Most likely will ever see. The amount of care you took to attend every little detail is insane. And it really paid off.

@phoschnizzle826 19 күн бұрын

For being a box of shame, that box has nothing to be ashamed of. Nicely done!

@callmespaghet Ай бұрын

Now that u have a new box, can i have the old one? :D

@skeery2605 Ай бұрын

Your pain in wood glue is the same pain I have for coolant. That stuff reeks and won't leave your pores

@oliverer3 Ай бұрын

Potential life hack, unscented shaving cream will pull most smells out of your pores. Haven't tried it for coolant specifically but it works for other things with similar unpleasant smells that get stuck to you.

@uncledansworkshop4776 Ай бұрын

For the woodworking tools, try a wax like Butcher's Boston Polish or even Johnson paste wax on the cast iron after sanding off the rust. It will greatly slow the rusting and won't contaminate the wood. Things slide nicely too. My first wood shop was in the damp basement of an old tobacco barn, and this even kept things nice in there for the most part.

@tonyn3123 Ай бұрын

Nice outcome. I missed the original plan to see how you planned to construct the box. Thanks I have to add that Boxes of Shame are very similar to shops. We always build the perfect size only to find it is deceptively small in quick order.

@panatornchiaranai3103 Ай бұрын

It's always a great day when Inheritance Machining releases a new video.😁

@firstnamelastname-th2ju Ай бұрын

that is a beautiful box

@InheritanceMachining Ай бұрын

Thank you

@TBJK07Jeep Ай бұрын

Brave man..I could never go shirtless. About 16 years ago, I made my daughters dresser. I dovetailed all the drawers for that dresser. If I would do it again, I would make it out of a better species of wood than poplar

@NicholasOrr Ай бұрын

i love how te actual box dimensions are specific to fit the previous box of shame and also fit exactly in that spot on the shelf

@learnitalready Ай бұрын

I learn an incredible amount from your videos! Keep up the fine work!

@b1air77 Ай бұрын

As a woodworker, I'm stoked to see you working with a material I can wrap my head around! Love the @notanengineer cameo, saw you on his channel too ;)

@InheritanceMachining Ай бұрын

I'm glad you can because it still boggles my mind 😂 thanks!

@NV..V Ай бұрын

Never over-torque solid brass screws. Another amazing video. Thank you.

@InheritanceMachining Ай бұрын

a lesson you only learn once 😂 thanks!

@alexsnow3319 Ай бұрын

"I'm not great at woodworking." Also you: I keep the wood 20 miles away from me....

@wellox8856 Ай бұрын

It came out looking amazing!

@InheritanceMachining Ай бұрын

Thank you!

@binyominmartin3308 Ай бұрын

I knew this was coming saw not an engineers video

@JTheDragonKing Ай бұрын

the fact the you made the OG Box of Shame fit in the new one and made it fit on the shelf is just * mwah * chefs kiss

@TheMagnusjj Ай бұрын

They didn't used to, but a lot (most/all?) of the syringe epoxies you can get at the big retailers have an accellerant that heats up the mixture, improving the bond but dramatically reducing the working time. This was incompatable with a particular projects so I bought some two part stuff from a marine supply store, figuring boat people don't cheap out on stuff that holds their boat together. You have to make sure you get the right mixture ratio or it won't fully cure, but once it's set you will never get the bits apart. Heating it does help, but you can do that mid-cure at a leisurely pace.

@aethertech Ай бұрын

Can anyone donate to the box of shame ? I have a few things....

@InheritanceMachining Ай бұрын

i think that's a can of worms I don't want to open haha

@aethertech Ай бұрын

@@InheritanceMachining lol. two weeks later, you'll be building the Dumpster of Shame.

@rogue6 Ай бұрын

I literally laughed out loud when the screw broke, followed by the 'oh no!' and the rapid montage of making a new one.

@Mtltrm 15 күн бұрын

The new and improved "fire" box of shame, great job... 😉👍

@jack002tuber Ай бұрын

When my box of shame got too small I started to make a bigger one, then messed it up and had to make an even bigger one

@davidjohnson4222 Ай бұрын

reading the letter upside (0:15) down and the audio is garbled: genius. Absolutely hilarious...needed that one today, thank you!

@jaredgodwin1494 25 күн бұрын

Im in college for CNC machining now, and ym instructor directed me to this channel. It has not disappointed in the slightest.

@caleblagrange7164 Ай бұрын

This is my favourite build on this channel. It's more interesting to watch a video where the creator is learning things as they go.

@graemecook8131 Ай бұрын

As a kid, that is indeed a "fire" box. Glad you didn't "yeet" it out a window. Bonus points for the black oxide, the surface treatment nerd in me very much appreciated the touch!!

@AriasThirdOfHisName Ай бұрын

I'm here for the sanding a raw log on a vice and quizzically looking at it to figure out why it's not working.

@CoolAsFreya Ай бұрын

Making several measurement errors while making the new box of shame is so on point!

@pronoob8213 Ай бұрын

I would love to see "Box of Shame" graved in to the Lid or some other place. Or I should better say I was hoping for it. But I have to say realy nice work. Well done.

@TaylorTheOtter Ай бұрын

That is disgustingly beautiful. It makes me physically sick knowing that there's a box that beautiful that I don't own.

@marvinmarlin9655 Ай бұрын

“Rather than become a better engineer I’ll make a bigger Box of Shame” 😂😊😅 What a great way to start a sunny weekend here in the UK. Thanks for your humour and skill, in equal measure.

@Peakapew Ай бұрын

"One man's barn scraps are another man's barn scraps" might be my new favorite quote.

@marsrover001 Ай бұрын

Something about the box of mistakes having so many mistakes is just poetry.

@voorts7428 Ай бұрын

Thank you for telling us about Craig's big wood.

@DeadeyeDaily Ай бұрын

"I'll build a window just to yeet you out of." 🤣🤣 FIRE!

@chrism9191 Ай бұрын

That top down view applying the finish would be a great intro with inheritance machining appearing as you apply it! Great video, thank you!

@andrewlucas246 Ай бұрын

so glad he got his face back! I think it would make a great 500k or 1m special if you took the scraps from the box of shame and turned them into something beautiful

@DerMarkus1982 15 күн бұрын

I came here from "Not An Engineer" 's channel. I knew about you and your Box Of Shame before, but NAE really put that concept - and *your channel* - on my mind's radar! I do also like your style of producing videos. Machining and silly jokes; just like ThisOldTony! Have a subscription, Mr. Inheritance Machining! 😁😁

@christophermcdonough1353 Ай бұрын

Love, love, love the honest ! When working in wood, there are days questioning everything I'm doing, especially a new project! But there was no greater joy than to figure out what went wrong, understanding it and having the project come out amazing!!

@1471SirFrederickBanbury Ай бұрын

From the second you put brass in the chuck, I knew your fate was sealed. You should really try brass bushings with polished, torch blued screws. The lustrous, eye-catching finish is enough of a reason to do so in of itself, but they’re also really strong for their size (especially in watches). Steffen Pahlow made a great video showing the making of these beautiful little things!

@ManuelRamcanny Ай бұрын

I laughed out loud for real at the "I'm going to make a bigger box" part 🤣

@reemtbuck2054 Ай бұрын

I'm Just a machinist's apprentice but seeing you working inspires me to be creative and gives me ideas on what to make next and although i'm going through a rough time seeing you Work hast something therapeutic to me and i really appreciate that so keep Up the good Work

@t0mn8r35 Ай бұрын

Doesn't matter how painful it was to make. We all enjoyed the process and the end result is definitely worth it!

@TheVoiseofwrighty Ай бұрын

When you snapped that screw i yelled f*** out loud, I was so invested

@erikziak1249 Ай бұрын

Good thing that shame is only inside the box. From the outside, it look gorgeous.

@smallshoptalk589 Ай бұрын

4 Days ago! How did I miss this? Yes, I watched "Not an Engineer" already. Glad to see a sort of follow up with the parts he sent you. I really enjoyed this video. Thanks.

@lildata9044 11 күн бұрын

Subscribed in anticipation for the hall of shame. Absolute gem of a channel!!

@rbraibish Ай бұрын

"Anybody" can be a machinist, but your wit and dialog make your videos so entertaining. I'd pay good money to see a stage show featuring you and ToT. I love the projects too, the radius fixture, Mobius cube and the dovetails of this project demonstrate your creativity and attention to detail, truly artistic stuff. You are funny, artistic, talented, and a machinist, a winning combination indeed. Thanks.

@InheritanceMachining Ай бұрын

You are very kind! Thank you!

@I2ed3ye Ай бұрын

A lot of fun and laughs but it's genuinely one of the nicest -junk- boxes I've ever seen.

@Kurgosh1 Ай бұрын

That is honestly lovely. Combining the two crafts makes for such a beautiful effect.

@1remski1 Ай бұрын

Beautiful design and execution. I enjoy your final products, as they are always an eye treat, not just slapped together with tight tolerances..

@davidsmethurst4318 Ай бұрын

It's like the old box was haunting you. "You thought that new one would be big enough? Eat this!"

@Raskian Ай бұрын

I am not a machinist, but I look forward to your videos and often rewatch some om my favorite videos like the massive fly cutter or the radius fixture (both parts). So I guess what I'm trying to say is thank you for all your amazing content!

@vinny142 Ай бұрын

When the other channel said the parts belonged in the box of shame, my first thought was "I hope he's going to ship those parts to that other guy and have him put them in the box of shame". And he did. And I was happy. All hail the box of shame.

@michaelmolter8828 Ай бұрын

When making boxes, you can wrap green felt around a piece of cardboard, and then push the cardboard into the top of the box for a nice felt lining.

@caveman31750 Ай бұрын

Awesome build video! I appreciate the detail you put into your work.

@hfletcher39 Ай бұрын

That first open and close was so satisfying. Love your work!

@sshep7119 Ай бұрын

A little bit of sanding and minwax makes a hell of a different on the surfaces of your wood working equipment if you have to store it outside. The tape trick for wood glue ups, especially corner glue ups, is something to look into.