Using DJI FOCUS PRO as your side handle grip is another great option🤩

You are mistaken if you can use a rear drop in filter for the EF mount. The version you were showing is a RF -EF adapter. That is why you should go with the L mount version, that is the only way you can have rear drop in filters plus you have access to the very good and excellent Cooke SP3 and the Zeiss Nano lenses which are not available in EF or PL mounts.

FACTS ON FACTS ON FACTS. Also, nice meeting you and the wifey at NAB!

Hey Michelle. Love the work. Keep on doing awesome stuff.

And Mid49 said they will be developing some options for the Pyxis. Including a BP-U to V-mount adapter (similar to what wooden camera and Tilta make for the FX6 which uses the same battery).

Exciting times!

Yo, get the L mount then get an EF adapter. L mount is getting more popular, someone is going to make a drop in filter set. And if not then you just gotta spend an extra 200 for a EF to L adapter. They make positive locking adapters.

It was so great seeing you at NAB - and meeting Michelle too!!

All solid recos, I cannot wait to rig this out 😮‍💨😮‍💨😮‍💨

Hey Michael in about 6 months the Blackmagic Video Assist monitors will receive a firmware update allowing them full control over the Pyxis 6K just like the built-in monitor. So that 100% should be the monitor of choice for anyone getting into this camera system.

There’s a fotodiox EF to L adapter with built in VND Two versions, one passive and one active. I have the passive version for my s5ii. Works great

If I were you, I would go with the L mount because then you can adapt it to EF or PL if you ever go that way in the future. Also, you can get the Tilta Mirage matte box system that clamps on the front of your lenses and the ND filter that it comes with is amazing.

I pre-ordered an L-mount PYXIS and purchased/pre-ordered a DJI Focus Pro, Rosette side plate, CoreSWX 98wh BPU batteries, Mofage Poco PL adapter with VND, and the BMD EVF. The only accessory I can't find to pre-order is the new BMD Cine Top Handle. Anything else I'd need, I already own.

Nicey Rig Side handle in black. Feels great and works!

It's good to hear the PYXIS is a product that doesn't replace the DSLR body. BMD is now providing more camera shape options. I have the original Hollyland M1 monitor and enjoy the convenience of built-in TX/RX.

Love it ! For a grip I would recommend the DJI Lidar. obviously a little bit of dough to acquire, but it acts as a grip and an auto-focus/ focus wheel when in manual. I think it will be an amazing option for this rig,

Killer show this year, sorry I missed you..

Great video. I would for sure get the Black Magic video assist monitor. We use that on the Komodo and I can imagine having the exact same user interface on the camera as the display would be really convenient, Plus, you get the option of choosing between 5" and 7".

I use the Hollyland M1 Enhanced kit everyday with my ursa 12k. It is excelent. Well built, great size and with sdi + hdmi. 800dollars for 2 monitors incl. Transmiter is an amazing deal.

Great video presentation

If you like the wooden handles, 8sinn make a super cool wooden rosette side grip, its a little pricier but looks sweet. that, the kondor blue wing grip and tiltas wooden side grips are my favs so far

Also a solution for carrying around the little ND's and what I've done in the passed when I used. Meike sell additional filter holders you can get, and I've used some strong hook and loop to stick them to the top of my rig, I could see myself doing that with 2 holders if I were to get the pyxis since there would be enough room on top for it. I'd have 1 filter in the mount itself, 1 holder empty and ready to receive the filter when I wish to swap and then pull the other filter from the second holder. Hopefully that makes sense!

A right side handle **with a strap**. This is one of the most under-appreciated bits of kit in hand held or shoulder mounted rigging. A strap on the handle allows you to relax your hand while still stabilizing the camera letting gravity rather than grip strength and stamina do most of the work. In my case I have had some Ursas along the way and already own a couple of those side handles, but there are third parties who make them as well. And keep in mind, even if the handle happens to have a run/stop button that doesn’t mean you need to power or connect it. Any handle can…just be a handle.

I'll be getting the L-mount version. Still deciding on which PL-to-L adapter to purchase. Cage from either Tilta or Kondor Blue. Battery solution will be a CoreSWX98wh battery for simple minimalist set up, waiting on Tilta or Mid49 to create the FX6 style BP-U to V-mount plate for anything other than a minimalist set up. Purchasing the Rosette side plate. Media storage will be using cfexpress cards

Kondor blue side handles are awesome, check those out.

def go with the port keys because you can control all of the camera functions from the monitor

After a lifetime of HDSLR (Canon 90d latest), decided to upgrade slightly. I was thinking the BMPCC 6k G2 (even though it lacked BNC or timecode), but THIS PYXIS 6k is now my camera i will get!!!! It literally has EVERYTHING I want!

How come the black magic video assist isn't in consideration? With the reduced prices its worth considering IMO.

Monitor wise (even though I'm currently only using HDMI cameras) a long while ago I got the Fotga c50. Has both HDMI/SDI, runs dual batteries at 2000 nits. UI is a bit clumsy but it's still running and cheap as chips!

If you want to continue using your V-mount batteries. They sell (including Tilta) BP-U to V-mount adapters. Only around $100.

Wait didn’t you say you were getting the ef mount? How are you planing on using drop in filters?

I once saw someone use the RED Komodo built-in screen on a gimbal and honestly for some project I could see using it, although obviously not a proper way of working

If I get it, I’d get the sdi module for my Ninja V. For power I would go with v Mount using the new vmount plates that Kondor Blue announced with the small vmount batteries from SmallRig. In terms of mount, I like the idea of the pl mount for extra sturdiness and lens data pass through. Finally I already have my Tilta mirage matte box with a bunch of Vaxis IRNDs, mist, and polarizer filters.

Oh nice I see me in the BG messing with a Pyxis too

CoreSWX makes great BPU batteries with USB-C and P-Tap for additional accessories. and a lot cheaper than the Sonys.

Does anyone know if IR pollution still is a thing with this sensor like it was back with the Pocket 4k/6K? For those you need a ND filter with IR cut otherwise you get horrible discolored blacks. That made the ND choice quite a bit more expensive. Did BMD fix this with the 6k cine / pyxis full frame sensor? If not, this could be another price / quality consideration for people.

To be honest I’m hooked on my iPhone 15 pro. I can make content for my brand effortlessly by airdropping to my new iPad Pro running DaVinci with a speed editor. I’m done chasing tech and now I’m just using what I know. It’s made my content and workflow that much better knowing all the ends and out. Next tech I’m buying this weekend is the Nucleus Nano 2. I’m obsessed with minimal setups.

The Vaxis Storm Cine 8" Monitor is fantastic. Look into it!

Just picked up the 5” and 7” Portkeys BM. I will also using the BM EVF. Batteries will be Core. They have a D-Tap built into them. Media, no go with Angelbird, I’ve had nothing but issues with them. Probably going Sandisk Pro Cinema. This camera will supplement my Sony Burano if a client wants raw and not a RED.

Which monitor is a tough choice. I think having camera control from a Portkeys monitor allows controlling the camera from a distance if it were ever on a jib; however, I have to say the integrated transmitter is a potentially really good option.

can you power the external monitor with the camera (battery) or is additional power needed?

The bottom tripod mounts is oriented wierd, why did they line up the threads horizontally instead of vertically?

Nitze has a black rosette side grip

Tilta or Smallrig will produce a V-mount to BP-U battery adapter to allow you to use a V-mount battery on the Pyxis. I can’t wait for the Pyxis to come out. I have everything ready for this camera. I purchased the camera, memory card, black magic video assist, and battery. I have lenses, matte box, lights, gimble, tripod, CineShooter, dolly, jib and many more.

This form factor is ideal for the Tilta Lightweight Shoulder Rig-which I already have. As for a monitor, I own a Portkeys 5 WR III which includes Bluetooth camera control. Works fine with the Pockets. Though I expect we will see plenty of USB-C powered alternatives coming out in the months the ahead. So don’t over spend on a monitor right away. A USB monitor won’t need batteries! Which will mean the rig will be lighter and will have a lower center of gravity (aka less likely to tip over when you put the camera down. Some should be very inexpensive as well. You can buy 11” USB-C laptop companion monitors for less than $100 on Amazon no separate video connection required. The Pyxis will be able to do the same and I expect BM will eventually roll out their own control monitor which will be a great addition to the system.

If I get that it’s going to be for anamorphic lens with DJI focus for sure

0:36 so wholesome

Where are you supposed to put a vmount if all the ports are flat on the back?

I'd go with either the Hollyland Portkeys or smallHD monitor the cine 5 is dope. batteries id go with core or hawkwoods the wood handles from smallrig are great also check out vocas bright tangerine shape tilta, bit confused if your getting locking EF how you're planning to use the Meike adapter, This is why I'd recommend going L mount (wished that was locking) and get an adapor. there is a sick one from Revolver who have great NDs made one in L mount an RF mount to locking EF and to PL. this is also why i'd personally recommend L mount as it allows you to go PL if needed. you may end up needed a different mount camera and cant use the one you have.

Meike doesnt make EF to L with the internal ND if it does please tell me where to find it for my Lumix

A locking EF to L adapter with a filter slot would be nice. Hopefully with a foot that can be mounted to rails or a cage (similar to Tilta’s RF adapters).

So the Sony batteries are the only power option? No option for V or gold mount?

By the way you wearing Kondor Blue, I hope they will bring out the best accessories for PYXIS including cage system

I'm a little confused as to why people think this camera is so incredible. Yes it's a box, but it's not a very small box. Why would you get this when you could get a BS1H, slap the video assist on it (you'll need an external monitor anyway for either camera) and still have Blackmagic raw. And that camera came out 3 years ago, and it has great autofocus and battery life. The Pyxis should have ditched the in-built screen and shipped with an external screen that can plug into one of the USB-C ports for monitoring and camera control, but still recorded Braw internally. And shrink it to BS1H size. That would have made it an amazing camera for rigging and gimbal work. As it stands now, you'd need a larger gimbal to accommodate it because it's too long and heavy. I only see this being a great camera for shoulder work, at which point get a used ursa mini 4.6K for the same price or less, and it will be far superior in many ways(unless you have to have full frame).

I ordered the L mount version as all of my lenses are L mount with the exception of the Irix cine set which are EF. I have the Sigma EF to L adapter. I have the 7" Atomos Shinobi monitor as well as the BM 5". I ordered the two Sony batteries at 350 a piece....yikes! I guess I'll use my matte box for ND's. Hopefully timecode will work well with my Mix Pre 3 II.

Nice video. Exactly what I was looking for. Pls help - I ordered the EF mount version. Should I change it? The L mount seems to be the more popular advise. I own no cine lenses so would be buying. However, I am also minded about cost of lens brands. Would prefer to start with something affordable initially then possibly upgrade later. Thank you.

For monitors. Im going for the black magic assist running at 395$ to keep the budget low.

i think am going to stick to my pocket 6k pro, wait till version 2 which for sure is going to have a flip out screen just like they did to the pocket 6k and they up graded to the pro and for sure its going to have better dynamic range and better frame rates and most likely nd filters

After getting my PYXIS I will do all accessories with my printer (to be custom to my need and taste) as I did it with Lumix.

What is the total $dollar cost of the camera + all the add ons you recommend? Im interested but Id like to know what im getting into.

maybe the usb port on the front can convert to hdmi? need an official black magic monitor over usb like the EVF with all the menus etc

The batteries are the same used on the canon c100 II (Idk about other Canon cinema line but I used that) And they are much more performant than the 970s

For the monitor I was thinking about a portrays because of the onboard camera control

the wooden handle can be sanded down a bit and turned black fairly easily

People swear by smallhd, but it's over $1k. Any insight to their monitors like the indie and cine 5, vs some of the options you suggested? really worth that much more?

Beyond ergonomics, a cube (which best fits with a cage, side handle and top handle, microphone attachment, viewfinder or control monitor) the fixed side LCD along with the function keys for menu settings becomes very uncomfortable for those who use Pyxis with the shooting operator alone. All this is a must to have a second operator in charge of navigating the menu. Unless an Atomos or Video Assist control monitor can show the Pyxis menu and dialogue on the touch screen but I don't think it can.

Hey Michael, I hear no-one talking about the top handle? Does the Pyxis come with that? I don't see it on the what's included list and ca't find it on the BMD site. Grtz

I would buy this camera in a heartbeat if a company could come out with an EF to L mount with drop in ND. Or a variable ND drop in. I don't mind the shape, I can get over the batteries. The screen not tilting is a big bummer, I really wanted an Ursa 4.6k update as I've been waiting for that, but I would buy it, possibly.

I think I'll be getting the BMD video assist 12G 5in as it's 2500 nits HDR - I'm actually hoping they come out with a USB version to pair with these new cameras (I'm sure they will!) I doubt I'll be recording to it, but it's an option if I ever want it - in the meantime, it's a great monitor, very bright and now very competitively priced°¬) Good thing is, I'm not going to be getting my Pyxis until later in the year so there's time for al the real feedback once the cameras are out so I can minimise buying mistakes! I'll be looking to create the tidiest rig I can so internal storage, minimal leads and probably a mechanical follow focus.

I have the BMPCC6K and enjoy it. But I dont see what all the hype of a box is? I can see where when traveling abroad that I will be looked at and denied entry to many locations. Ive been asked if I have a permit in London and Rome with my previous set up. Now I have it scaled down for traveling.

well when the make it 6k 120 fps Ill def be getting one.

you know what they say, "You can pick your friends, you can pick your ergonomics, but you can't pick your friends' ergonomics."

lol the high pitch 3:33

Pyxis is nice, but I'm so down for a 12K FF "SOLO" with less features / screens and shorter and V-Mount. That dynamic / resolution is insane.

not really going to consider the Blackmagic monitors? just came down in price by 200 each one. though I do also own the HollyLand enhanced....only that I wish it was brighter.

Did you say you were filming a video with Blackmagic asking questions when you had your meeting with them at NAB?

That Meike adapter won’t work. It’s for EOS-R lens mounts. You’re gonna have to do front filters. There’s nothing that can adapt EF to locking EF and has rear ND filters.

Is it not possible to use a usb-c to HDMI cable to a monitor on this? If the front USB-C port is a display port, then why would you not be able to run a monitor from it using a USB-C to HDMI cable? I know you won't have camera control from it, but a monitor should work, no?

Come on Michelle, keep doing it well

I’m sorry if this has already been asked but, why wouldn’t you go with a V-Mount battery?

You can't use that MEIKE drop in filter adapter, because it's R-mount to EF, and the camera is already EF. If you're going to add drop in filters then you must go with the L-Mount version of the PYXIS, and get an L to EF adapter with drop in filters. That's the number one reason most people think the L-Mount version of the Pyxis is the best option, because one can add an ND Flange adapter.

I’m sure they’ll make a v Mount battery converter like the FX6 has

Michelle brought me here

Michelle , you are the wind beneath his wings. AS for the monitor, I think that there will be a solution by the time the camera ships. Maybe an App for USB-C smart devices.

Drop-in vnd… from EF to RF mount… not seeing this working on this camera. I’m honestly surprised they went with EF mount, and not the new RF mount, which would be more adaptable. I wonder 2 things. Will this camera have the gyro stabilization, and how is the autofocus?

After considering this new camera, the 6kk Pro is the better camera overall..But the Pyxis is a good camera to built-out for customized production use cases.

You missed the best monitor " SHIMBOL M7 " a 7 inch 2000 Nits build with Aviation Aluminium slim design extremely strong but light weight HDMI & 3GSDI in/out it just for $380 USD

Bro we love you and your wife! Say hi to her!

how is that ND going to work? its Canon RF mount to EF. Would work on the RED Komodo.. but not this.. bummer I know. 🤦‍♂Internal ND's are the #1 reason I just bought another Pocket 6k Pro (used), otherwise yeah I would have ordered this.

I think there are adapters from BP-U to V-Mount

Question about the Meike adapter though… if it’s EF to EOS-R how does that fit on any of the PYXIS mounts? Do you need another adapter as well? Like EOS-R to L-mount in addition?

I have only 3G SDI Monitor.. can I used it with the Pyxis 12G SDI Port?

Portkeys are the only one that has Blackmagic camera control!🎉

I use my top screen on the Komodo all the time Michael😂

Dear Michelle, if you truly love your man, please help him and be in his videos. Helping your man by being in his videos, means more content, which results in more views, which results in more revenue, which results more freedom and opportunities (travel etc.) for you guys. Everything that your man does, is at the end of the day for you.

If you're going to do the adaptor to get the drop in NDs you MUST get the L mount. Sorry. Otherwise there will not be any space for an adaptor due to the flange distance.

I've seen many claim that the power connector for the PYXIS camera is the same of previous BM Cinema Cameras. Furthermore on the BH listing for the Blackmagic Design 12V Power Supply for Pocket Cinema Camera 4K (30W) claims to have compatibility with the PYXIS. Although I have noticed that based on photos and videos of the PYXIS the locking lug on the PYXIS is in-line with the pins whereas previous connectors, the Pocket 4K for example, the locking lug is perpendicular to the pins. Furthermore I've noticed that the end of the older cinema camera power adapter cord is female, but the power input on the PYXIS itself is female too. Does this mean the PYXIS will have a new power connector type?

Sorry, commenting as I go! At the moment Meike does not make an EF to L Mount variable ND. The one you have in your basket is for Canon's RF mount. Meike also make a locking PL to Fuji X variable drop in. Please use your platform to bug them to make L mount versions! With the pyxis it's pretty much easy money for them as users aren't worried about degrading their autofocus performance. Where as with my FX30 I don't use their adaptor even though they do have once because the big up side of Sony is brilliant auto focus.

I don't see a purchase option for the top handle. I don't think it's included with Pyxis, but it's not listed on any pre-order stores either.

Don’t want a built in monitor. I want a dedicated touch screen for functionality