Injection Molding - Undercuts (How to Avoid and Design)

Рет қаралды 72,388

3 жыл бұрын

Learn what an undercut in injection molding is and how to design your part avoiding undercuts. We'll demonstrate how to re-design a part with an undercut in Fusion 360 using a shutoff.
🔔 Subscribe for more 🔔
kzfaq.info/love/1nzmktP1usjdqewrBDN_uQ
00:00 Intro
00:23 Learn what an undercut in injection molding is. We'll demonstrate how an undercut makes it difficult for a part to be ejected from the mold.
00:50 We'll discuss the 4 main ways to avoid an undercut in injection molding.
01:01 Shutoffs explained. You'll learn how removing material under the undercut can help the part eject better from the mold.
01:26 Moving the parting line explained. This is the easiest way to avoid an undercut in injection molding.
01:42 Bumpoffs explained. Learn when and how to use a bumpoff for undercuts.
02:16 Sliding side-actions and cores explained. Learn to use side-actions when an undercut can't be avoided.
02:47 We'll remodel a part with a snap-fit feature and undercut in Fusion 360. You'll learn how to create a shutoff by making a cut out under the snap-fit feature. Finally, we'll add a draft angle to the design.
FREE injection molding manufacturing and design guide: 3dhu.bs/zeBYlu
Protolabs is the fastest and most comprehensive digital manufacturing service in the world, combining in-house quick-turn factories and premium manufacturing partners at Protolabs Network. Users can easily upload their design, instantly receive a quote, and start production at the click of a button.
Order custom parts online today: identity.protolabs.com/
Protolabs
Facebook: Protolabs/
Instagram: protolabsmfg
www.linkedin.com/company/proto-labs/

Пікірлер: 35

@ethaneveraldo 2 жыл бұрын

Love that you guys jump straight into Fusion and show a real life example.

@alisadatakhavi Жыл бұрын

Short, Direct to the point, followed with simple, clear example. Very helpful for beginners. Thank you

@vat_1989 2 жыл бұрын

Beautiful explanation

@technov1king 3 жыл бұрын

nice explanation. Love it!!

@highkick1995 8 ай бұрын

Dude, I don't know how much i can thank you! I am busy with a study project and it was breaking my ballz. Muchas gracias mustachas

@Zero-se4xb 2 жыл бұрын

Love the young Howard Stark mustache!

@dr.aniljavali3056 11 ай бұрын

NICELY EXPLAINED USING CHAPTERS.

@PS77787 3 жыл бұрын

Good video bro! Very informative

@peekeeleealrahman5747 3 жыл бұрын

Many thanks

@nurullahgozubuyuk1629 3 жыл бұрын

Thank you very much

@avi34669 4 ай бұрын

This is a very practical example. Very typical issue you come across in part design for injection moulding. Nice work.

@KurauPlastics 2 жыл бұрын

Very good explanation. Good job

@10karamel37 3 ай бұрын

your literally a life saver OMG THANK YOUU MY DESIGN IA is saved

@josiaspereira984 2 жыл бұрын

Fantastico!!!

@Tydeyes 3 жыл бұрын

Hey your ad worked! Great video. First youtube video I've clicked on from an ad.

@TripleEngineerElyesMrabet Жыл бұрын

thank you

@KISHORENEDUMARAN 3 жыл бұрын

nicely explained. the example was on point. I'd like to see some more f360 examples though

@akay435 10 ай бұрын

Thanks

@sunilmanwani9289 2 жыл бұрын

As someone new to injection molds its quite confusing all the terms you mentioned. Anways Good job

@XerxesGustav Жыл бұрын

You forgot to mention lifters, which is afaik the most common way to solve the undercut issue after shut-offs, since they are cheaper than side-action and more flexible in placement.. Furthermore minimum draft angle for a metal-to-metal surface in the mold is typically 3 degrees minimum. 1.5 degrees for that shut-off is very tight. Wouldn't it also be simpler to just extrude with a 3 degree draft from the undercut surface through the bottom of the part. That way you dont have to create a sketch, and you don't have to use the draft command, so fewer features on your timeline.

@varunm7011 2 жыл бұрын

any videos that cover , tips to maintain uniform wall thickness ?

@samgoldfisher2526 3 жыл бұрын

This is great and interesting (as was the previous video). You do a good job and that's lovely! As a suggestion for this video and the previous one: adding a really simple simulation of the ejection will help a lot to understand how your solution actually helps. If you do compare side to side the initial model without shutoff and your result with a shutoff, I am convinced that anyone could understand that ;-) Anyway, you do a good job, thanks a lot. And now I am waiting for the third video ;-)

@ProtolabsMFG 3 жыл бұрын

Hi Thibaut, thanks for the compliment and feedback! We always strive to make the videos as clear as possible and we will absolutely consider your suggestion.

@samgoldfisher2526 3 жыл бұрын

@@ProtolabsMFG You do an amazing job ;-) ! Keep going, that really interesting

@ArtisanMouldcoltd 3 жыл бұрын

good and helpful , We are a company supply plastic injection tooling and moling

@Crokto 2 жыл бұрын

so something im working on is basically a box, but it would require a straight up hole (or two) in the side...seems like my only options are side action & changing the parting line, and changing the parting line would just create more undercuts...

@danilolobo1167 2 жыл бұрын

Could you recomend a book to study about this?

@broughttoideas 3 жыл бұрын

Wow I would like to say that I understood that but I definitely didn’t understand the undercut great quality thou

@ProtolabsMFG 3 жыл бұрын

Hi, sorry to hear that! Is there a specific part you would like to know more about?

@broughttoideas 3 жыл бұрын

@@ProtolabsMFG I don’t understand how the undercut made it easier to remove from mold

@dunichtich100 Жыл бұрын

But if you don't want a hole in the bottom of your part you need a side slide, correct? 😅

@nileshgound3046 2 жыл бұрын

Why business I'd required for downloading this pdf. What if there a student need that kind of knowledge? Please do something about it... I am just a learner not a businessman.