Injora Jeep Cherokee build PT.6 // How To Mount Body, wheel wells, rims & tires // RC Garage Talk

Рет қаралды 7,353

Жыл бұрын

Pt.1 • RC Garage Talk / Jeep ...
Pt.2 • RC Garage Talk // Jeep...
Pt.3 • Jeep Cherokee build PT...
PT.4 • Jeep Cherokee build PT...
Pt.5 • Injora Jeep Cherokee b...
Want more??? check out these videos as well--
25ft long 8ft tall wire bridge event PT.1 - • MNRCC RC Event Pt.1 / ...
First big competition of the year- • RC Rock Crawler Compet...
huge group crawl and comp practice - • RC Rock Crawler Compet...
Also can contact me at
Email: sleeplessgamingsociety@gmail.com
Follow along more to join group events at
Facebook: JT JET -- / jt.tool
Instagram: @rcwalks -- rcwalks?hl=en
Discord link: / discord
Live Gaming on Twitch
Link: / jt_jet
Injora would like to give you 5% off at there website for watching me test and review they're products, use code JTJET05 at checkout at they're website: www.injora.com/
Disclaimer: I'm not Affiliated and gain no profit from use of this code.
Thank you for all that you all do, Happy trucking!
#remotecontrol #hiking #offroad

Пікірлер: 49

@ComputersHowtos 4 күн бұрын

Cool trick with the wheel wells. Cool build and nice video series.

@Bonald1 Күн бұрын

Thank you for sharing how to mount the body. I'm looking for inspiration on how to mount a bronco hard body and I'm going to use the rear bracket idea.

@csdunaway Жыл бұрын

Thank you again for showing us the trick on how to create inner fenders!

@JT_JET Жыл бұрын

Hope it helps, it has saved me a lot of money and headaches 😅

@kellykuretich6366 Жыл бұрын

😁😁👍👍

@JT_JET Жыл бұрын

@GARYU-S44 Жыл бұрын

very good share 👍 good video 👌 friends😆🤝

@JT_JET Жыл бұрын

Thank you! Cheers!

@GARYU-S44 Жыл бұрын

@@JT_JET 😊👌

@alantaylor353 Жыл бұрын

Spot on mate.!👍 👍 👍

@overdosed51 Жыл бұрын

Thanks for that inner fender tip! Such a good idea

@JT_JET Жыл бұрын

I’m so glad it helped! I just passed on info another person gave me 😄 best of luck on the build and then the trail!

@reezoshideout 6 ай бұрын

Thanks for making this. I subscribed, I am about to get my first hard body for my TRX-4 Sport. I could not find the exact rims, which seem to be pretty nice. I am going to Injora for most of the stuff, your videos - and the fun you have - confirmed that Injora is a solid choice and then from there on: it's in the driver and in the teamwork (recoveries ;)).

@JT_JET 5 ай бұрын

thanks for being so kind and supporting, it means more then i can put into words. somtimes they run out of stuck, but i beielve the rims would be called somthing like 3mm off-set 5 spoke or somthing like that, they have the biggest selection of rims so it just may need some more searching through the pages. sorry i cant be much more of a help. happy trucking and best of luck with the build!

@reezoshideout 5 ай бұрын

That's great help already, thank you @@JT_JET and Haley! Have fun,

@capciphoby7944 Жыл бұрын

Very nice bro👌😍

@JT_JET Жыл бұрын

Thank you 😊

@Trailride999 Жыл бұрын

Awesome Channel 😊Real people RC action. Keep up the great work 👍

@JT_JET Жыл бұрын

Thank you for watching and being kind. happy holidays!

@pacificxnative8818 Жыл бұрын

Definitely doing the flower thing 🤙🏽

@JT_JET Жыл бұрын

Flower thing? I’m confused I may have already forgotten what I’ve talked about 🤣😅🤙 have a great weekend!

@MysticRiverRC 9 ай бұрын

Thanks for the info. I subb'd the channel. I need to put an Injora body on a SCX10ii, and all these tips are very helpful. I look forward to watching the other build videos.

@brandoncropper1259 Жыл бұрын

Really like the build. I’m not sure if you mentioned it in another vid but what size leds did you use for the lights in the body? I wanna get the body and lights but don’t want to order the wrong ones. Thanks

@JT_JET Жыл бұрын

the body comes with the light pack, its four RC sized lights, idk the technical term but if you check out injora.com you will see them listed in the pakage for the body, its four bulbs and you choose where to put them. i hope this helps, best of luck! thanks for watching and happy building.

@BSF628 Жыл бұрын

Hey man do you remember where you got the light kit for the Cherokee head/tail lights? Thanks

@JT_JET Жыл бұрын

It comes with the roof rack, you can order separate lights from injora.com and use code JTJET05 for 5% off your order at checkout. I make no profit from the use of the code. Good luck with the build and happy trucking

@EthanCmsrc108 6 ай бұрын

How did you center the body? I had an issue with getting mine centered years ago.

@JT_JET 6 ай бұрын

not sure what you mean by that. but theres multiple videos to this build series. if the help needed is not in the videos they im sure im no help at all :D best of luck on the build heres the playlist if interested, take care and happy trucking!kzfaq.info/sun/PLwc1XJzz50iVIIg9x0BeLTrRxbtphT6kK

@travisdieter6119 Жыл бұрын

When using the injora hardbodies, will the body fit on a TRX4 with the inner fenders on the truck? really want a hard body but dont really want to lose my fenders. none of the videos i have found explain that at all everyone always talking about the sport that has no inner fenders.

@JT_JET Жыл бұрын

watch the build series i go way more in depth on that then i can in text. in short you can build anything you set your mind to. yeahs i use the sport's hard fenders up front for some of my builds and yes they are trimmed and yes i make my own fenders, if you watch this episode you will see how. good luck and happy trucking

@travisdieter6119 Жыл бұрын

@@JT_JET Thank you, I watched the videos but I wasn't sure if you just made your own to save money or if stock would fit or not. Thanks again, will probably just end up trying to see what i can figure out with them on.

@MidwestRCcrawler 8 ай бұрын

I have the same body and I just built the trx4 sport kit. I got everything together last night, but my body sits a tad higher than I’d like. I have the exact same setup as you used. The brackets the body comes with for the rear and the magnets up front, except I used the stock sport body posts, trimmed off the nub at the top, mounted the magnet to that and hot glued magnets to the body. It’s all level and sits nice to the bumpers, but I have a gap at the floor board or slider area. Maybe 1/4+”? Just curious if you have a trick for that. I know I can lower the front down due to the body post mounts, but the rear is a different story.

@JT_JET 8 ай бұрын

hmmmm off the top of my head. get some sliders that go out and not down that way it fills that gap and looks like the real deal.{i used just thing metal plate that broke from old sliders i had} its in one of the build episodes somwhere :D but without having my hands on it theres not much i can help with other then say this is what i done. it seems like you will figure somthing out and im flattered you thought i could help. Best of luck, you got it!

@MidwestRCcrawler 8 ай бұрын

@@JT_JET yeah I’m fairly new to all this rc stuff and I came across your channel and love your videos and all your builds. I knew you had some “how to” videos on your Cherokee build so I thought you’d be the best one to ask. I’m sure I’ll figure something out. Thank you for responding and keep on truckin on!

@MidwestRCcrawler 8 ай бұрын

Update, I figured out how to lower my body. Made two brackets for the rear mounting points and lowered it about 1/4”. Dropped my front body posts w/magnets the same. I did use that sport bumper adaptor that you used, but I trimmed it up and now it sits under and behind the stock bumper. Looks factory now. Added the straight out rock sliders and now it looks like it should and how I want it to. Love this Cherokee!

@urielcoria6511 8 ай бұрын

Does this injora body fit the scx10iii base camp?? 6:32

@JT_JET 5 ай бұрын

idk this is a build for the trx-4 sport

@benjamincloutiermainerc Жыл бұрын

Hope everything g is OK have t seen anything in a while from u

@JT_JET Жыл бұрын

All if we’ll, thank you for being so kind. There will be some new winter series indoor events and competitions comming soon 😄 have a wonderful week!

@benjamincloutiermainerc Жыл бұрын

@@JT_JET do you guys have any snow yet ?? Oh I herd that you guys get alot of sno like us up here in the mountains I live five minutes from. The hardest part of the Appalachian trail Maines mountain ranges and big rock trails I haven't got to bringing my rc rhere yet but someday I hope to

@markz3295 11 ай бұрын

tire size ?

@JT_JET 11 ай бұрын

use whatever you like. anything under 1.9 106mm is class 1 legal for sorrca.

@markz3295 11 ай бұрын

@@JT_JET its cause i got 1.9 and they kind of rub on the body i like the fitment on your jeep

@JT_JET 11 ай бұрын

@@markz3295 yeah but just having the same tire size may not do the trick, it also depends on how low your body is fitted on to the frame and shock length, possible fender trip, even the fact that i use rims with a 3mm offset which makes it wider make them fill the wheel wells more. i want to be helpful but please do understand that simply saying to use what i did may not give you the same result. these are 106mm to the best of my knowldege on 1.9 3mm offset rims. best of luck and happy trucking. oh thanks for wathing i really hope you enjoyed, i dont pretend to have the answers im just willing to look like a fool. have a great night!

@markz3295 11 ай бұрын

@@JT_JET thank you i just got longer shocks and it has a bit more clearance i just have to move my diff back back half and inch but i kit should be here tomorrow thanks 👍🏻

@JT_JET 11 ай бұрын

@@markz3295 yup