Inlaying Silver Wire

Рет қаралды 1,771

2 жыл бұрын

On this video I go over the technique of inlaying fine silver wire in a pair of spurs. I explain how the channel is prepared and how the silver is put into the channel and then polished off.

Пікірлер: 20

@Jimmy-sb3fc 7 ай бұрын

Thank you Mr. Nord, you are a true artisan and we're very lucky to be the recipients of your willingness to share your knowledge and talents.

@JohnNordDesigns 7 ай бұрын

Thank you, that means alot

@MohammadTayyab777 2 жыл бұрын

John your each word and second sepent for video is worthy. Thanks for sharing your knowledge with us.

@JohnNordDesigns 2 жыл бұрын

Thank you!

@morrispaul5599 2 жыл бұрын

Thank you John, your videos are a real help

@JohnNordDesigns 2 жыл бұрын

Thank you!

@davidkimble5140 10 ай бұрын

Love your video. It gives me some ideas

@JohnNordDesigns 10 ай бұрын

Thank you David

@paulrobertson7980 2 жыл бұрын

Thanks John great info

@JohnNordDesigns 2 жыл бұрын

Thank you for listening!

@shantkevorkian889 Жыл бұрын

Thank you Sir for your video and sharing these informations, I was really confused about the depth but after what I saw I can adjust my depth and width,I am a professional diamond setter and I am willing to learn engraving, many thanks again and God bless y'all

@JohnNordDesigns Жыл бұрын

Thank you for the kind words and im glad it helped!

@shantkevorkian889 Жыл бұрын

@JohnNordDesigns you r a legend 👏 I added you on Facebook too 😀

@ira_peavy 2 жыл бұрын

Thanks for sharing your knowledge with us John.

@JohnNordDesigns 2 жыл бұрын

Thank you for the kind comment!

@christopherrhynes8556 2 жыл бұрын

I want to thank you for putting these videos out they have helped me tremendously I have one question though where do you get the rivets for the strap hangers and what size are they thank you very much

@JohnNordDesigns 2 жыл бұрын

Thank you! That is why I do them. I had alot of free help when I started. I think you are speaking of the spur buttons that go on the hangers. You can buy them from Westernmetalartsupply.com, or from Ranch2arena.com. Either place usually has them.

@christopherrhynes8556 2 жыл бұрын

@@JohnNordDesigns thank you so much for your help as you know it is hard getting started but with your videos and your help I am ahead of the game now

@ricardoruiz6612 Жыл бұрын

thank you for the knowledge and time spent on the video. i have several questions but ill just stick to one. for a beginner what would you recommend for and engraver. budget friendly but something that will do the job like what your doing in this video. Thanks again

@JohnNordDesigns Жыл бұрын

Well, I would always recommend the pulse graver. No air needed, and does the job and more. You can go with the air GRS models and maybe find one on ebay for less money, but you will need a pretty good compressor to run one. So money wise, you will spend close to what you will spend with the pulse graver. When i got started, i borrowed $5000 to get all my engraving stuff. You can always go the hammer graver route by hand…. But you will spend alot of time learning. Of course with any engraver, its best to sign up for classes.