I’m sad for “JB in the past” struggling on with his black and white camera, good for him. 👍😊 I would fly one of these with no problem at all, it looks great.
@mark78063 Жыл бұрын
I still fly my tyro 119. I only use it to fly around in the country,but I love it. I became a Patreon because of this quad and JBs tutorial. Please keep up the great work.
@johnjonesdronesfpv7939 Жыл бұрын
Same, loved that video series! Got me building! I build 5 inch freestyle now and im super hooked for over 2 years. :)
@VernStarr Жыл бұрын
A friend of mine that's new to the hobby picked up the Walksnail version recently - I was pretty impressed for what it cost! One thing that struck me as really odd was that the FC isn't actually mounted on gummies, it is sandwiched between blue silicone spacers (which is close but not quite the same). I helped him redo the stack with proper gummies and metal locknuts on the very bottom and top of the stack screws. We also updated the ESCs to BlueJay and turned on RPM filtering and dynamic idle and loaded the SupaFly 5" preset. I also gave him a set of HQ V2S props. Between all that it got rid of most of the chugging/grinding noise it randomly makes, and flies great. The Walksnail VTX is in the way back section, and of course has a completely different camera than yours had. Oh, and I did have to laugh a bit when I saw the ELRS receiver was zip-tied to the big ESC capacitor. All in all a really good starter/basher.
@heliharris69 Жыл бұрын
Never had a bad product from Darwin... In fact for the money.. they are damn good value.
@StrickleeFpv Жыл бұрын
Right mine I bought in January and I still fly it everyday . Both the 5 and seven inch surprisingly have become my most reliable quads and cost was crazy cheap . I couldn’t even build one that cheap
@funkynerd_com Жыл бұрын
DarwinFPV make some good stuff. I've got custom build 5" race drones, big 12" cinelifters, micros, etc, but one of my favourites to just rip about is my DarwinFPV Baby Ape V2. Even with just the 2S on it, but throw a 3S on it and it is insane.
@abcdefg4570 Жыл бұрын
I've been building long-range fixed wing UAV aircraft, and I've been thinking about getting my first FPV drone. I think I'll get the Baby Ape, as the reviews are really good, it's tiny and can be flown pretty much anywhere, and it's really cheap.
@BooToob Жыл бұрын
Haha perfect timing considering I asked a question about this quad yesterday on stream. My Darwin 240 has been great! Edit: Ended up updating mine with betaflight 4.4, swapped the props for PB&J's, and swapped the vtx/camera with a caddx vista. It only comes in 4s that's why I was asking about 6s on 2400kv via motor limit yesterday.
@Sugalime3D_FPV Жыл бұрын
what FC target did you choose for an betaflight update to 4.4 ?
@hyperx6525 Жыл бұрын
on beta flight there is not the right FC target .... i also dont know which i must choose ????????
@BooToob Жыл бұрын
For those wondering, I used the MATEKF405STD_CLONE as the target.
@hyperx6525 Жыл бұрын
@@BooToob is that working ?
@blackjungle308 Жыл бұрын
Dangit JB. I rewatched 12:00 about 3 times, thinking my discord was pinging. :D
@Sugalime3D_FPV Жыл бұрын
You can use 4S or 6S LIPOS on this with pretty the same performance... From what I've read from comments on KZfaq, it is possible to set Betaflight so that if the FC detects a 6S battery, the FC will open the throttle up to 67%, if the FC detects a 4S battery, the FC open the throttle up to 100%. I would suggest you buy small 4S batteries for a 3.5 to 4 inch, and 6S batteries for the J5. You can use both on the J5 until one motor breaks down. Then buy 6S motors.
@sriparthreddyreddyrguktian6023 Жыл бұрын
He was roasting the company all the way in the video 😂 i just felt it
@sunshynff Жыл бұрын
I don't have a bind n fly, but I've been very happy with their electronic hardware. Also, I LOVE those connectors they send where you have to insert your own wires!! Yeah, sometimes you have to solder them to other wires from another connector, but I'm often mixing and matching hardware. When it comes to which order they're in, especially ESC-FC ...cur/nc/1234/vcc/gnd....are rarely in the same order, but if you buy just an FC or ESC from Darwin they send you several of those connectors, 3/4/ and 5 pin, and a whole bunch of individual wires, so you can make your own customized harness.
@pbshooter100 Жыл бұрын
I have a Tyro129 7" that I purchased back in the day. I also have a Tyro 79. The Tyro's were sold by Eachine. The frame design of the Dawin240 is not exactly the same as my 129 but it is very similar in a lot of respects. The flight stack looks to me to be identical. The camera that came with the 129 kit was total junk, the same that you have found to be true with the Darwin. I replaced my with one from Caddx. I did get RPM filtering /Bidirectional Dshot working by installing bluejay firmware and as you indicated I had to change the gyro rate from 8K to 4K to get it all to work. So while the Darwin240 may not be an exact copy of the Tyro's of the past it seems to be pretty darn close.
@tyler548 Жыл бұрын
I bought one a couple months ago. I cannot complain. All it’s needs is. DJI vtx
@incognegro_fpv Жыл бұрын
I actually ended up losing the 1st one i got. i then got a 2nd with elrs and i love em. flies well for a beginner 5in. ive made some decent footage and it flies good for the price. im going to purchase the 7in next. i also have the cineape25. the babyape is what got me started.
@hyperx6525 Жыл бұрын
It cool but on the website you cant offer thing from the frame like only a arm you only can offer the hole frame etc. Why i can not buy thing like the under plate etc. ????
@chrisbee5481 Жыл бұрын
60$ speedybee f405 stack 20$ speedybee 800mw vtx 30$ TBS source one 5`frame 20$ foxeer micro camera 60$ emax 2207 or tmotor velox = 190 $ for a DIY build. Cheapest good components I can come up with. Unfortunatly this darwinfpv is 4S and no option for me today.
@Sugalime3D_FPV Жыл бұрын
That sounds good. But only if you can buy all these parts or alternative parts in one shop, with some low shipping costs or free shipping. It surprises me though. Because many reviews always say the J5 or Nazgul V3 is more expensive if you buy all parts individually...
@zappex92 Жыл бұрын
@@Sugalime3D_FPV only aliexpress!!!
@Nathan-qt2zi Жыл бұрын
I fly mine 6s no problems yet 😂
@adamrupsis3390 Жыл бұрын
+15 for receiver, but that stack is rock solid, I have one that I need to throw bluejay on and make it even better, but especially with a low resonance frame like the AOS, it's crazy what that thing can do
@Sugalime3D_FPV Жыл бұрын
@@Nathan-qt2zi So you fly 6S on these oroginal 4S 2400 kV motors ? 🤣 Actually I burned all of my motors by activating 3D and BD-DShot. I also did a video about that. I had the chance to switch to 6S with buying 6S motors. But i decided to stay at 4S just because I can't affort a second 6S drone and new lipos at the moment. I have a second 4S drone. I want always 2 drones of the same S number. Because if you damage your drone you can still discharge your lipos with your second drone...
@ZorrotorFPV Жыл бұрын
Why do I think DarwinFPV is the former Eachine? Looking at the blue, 3-star bell on the motors´from the TS215, the VTX layout and the brightish carbon fiber, the old Johnny's Astrox frame design before he went to QAV, oh, and the NARROW 2.8mm camera lens from the firsts Wizards.
@HollywoodFPV Жыл бұрын
Good to see ya putting out affordable stuff 💪😁💪
@srundo Жыл бұрын
hey joshua! just wanna say that I really look up to you dude and thanks for all these great informing vids!!!
@GrimSpeedFPV Жыл бұрын
Now this is awesome!!! Thank you for reviewing this!! My type of stuff here honestly excited seeing it💯
@StrickleeFpv Жыл бұрын
I have this quad fly it every day and believe it or not it has become my main dependable drone . I replaced the cam with run cam 2 Phoenix Jb edition . That’s about it and some tuning it flys great even on 4s 1500mah batteries . 🤷♂️ not to shabby with crossfire go pro mount sucked and snapped off so I got a fixed angle mount and it is solid now great platform for learning and upgrades .
@lunaticfpv17 Жыл бұрын
Darwinfpv is cool. I do love the baby ape, I just wish they would have went a tiiiiny bit more on the motors as they do break incredibly easy and I have swapped 3 now
@dyno241 Жыл бұрын
Motors were my biggest issue with the babyape, and since the mounting holes aren't a standard pattern, you can't upgrade the motors without drilling out an arm every time you break one. Ended up putting all the electronics on a tp3 with new motors
@jdnic1 Жыл бұрын
I mean as a person who builds his own quad (15+ quads built) i see this as something I could just buy and trash around, rather than my expensive $300+ quad. And for me, it's still interesting. Now if this quad have bluetooth connection to beta flight then that's another+ because none of my built quads have that feature.
@doodgeslagenmug Жыл бұрын
Genius move from Darwin to save money on the camera so that you have to spend money on the camera….
@goballistik1 Жыл бұрын
Interesting how the name is the Price it costs here in Canada. $238.92 actually.
@Loochy808 Жыл бұрын
I have a couple of old Tyros that i still fly regularly. Both a 79 and a 99. I bought this so fast.
@FATSNAIL-FPV Жыл бұрын
The rebranded eachine flight stack strikes again 😂
@jwhitaker81 Жыл бұрын
I own nice quads, I own Darwin quads, they are not bad, except for the cameras. Every time I buy one. I order a camera with it, LOL. Step it up Darwin! Good video JB been waiting for your opinion on this one. I use it for my basher, Johnny 240 is pretty tough.
@r3beatty Жыл бұрын
Get a 3D print for a GPS, toss on a 4s lion and you have a semi-disposable long range 5". 1W vtx, a frame that isn't horribly heavy, zero build time, and if it doesn't make it home you won't cry about it. Wonder if inav has a target for it...
@stlzjguy Жыл бұрын
Looks decent for the price and you was ripping it. Nice flying!!!!
@scotthendrrix Жыл бұрын
OH wow I love it!!!! I think its definitely worth a shot for sure
@gmivisualsjason3729 Жыл бұрын
Thats the best vtx ever!!!! Especially for those of us in EU
@aglandorf75 Жыл бұрын
Started off with a Tyro 129 and got myself the Darwin Fpv cineape 25 which is still a good Quad. I wished I had bought the Walksnail + Elrs combo, but I was a early bird which catched the Analog + Elrs. Will try to convert it to Walksnail.
@parker1ray8 ай бұрын
I have five of their quads and they are all good little fliers!
@big-smoke-rc Жыл бұрын
The motors are semi-generic rebranded motors used for other rc purposes. The shafts are removable so you can invert them and run the motor inboard as opposed to outboard. Plenty of incredibly high performance and high wear motors for other hobbies still work this way. Just sayin
@adamosanatolitis5833 Жыл бұрын
I am sorry I have to say it for the people in Europe. I will take Remote ID over the prices that you guys get in the US. JB just said that you can buy the Nazgul V3 for 100 more. Assuming around the 330 Dollars range.... I bought my Nazgul V3 WITH A VISTA, for 481 euros (and an ELRS receiver).... Give me these prices and availability and I will take the remote ID with me. Jesus christ the prices always make me sad to my core. not even taking into account that the dollar is weaker than the Euro which makes the case even worst. Sorry don't wanna rant. Love you JB, keep up the good work. Just wanted to show you the other side of things guys and I am pretty sure remote ID is coming to our side of the fence as well :/
@MCsCreations Жыл бұрын
Fantastic flying and review, Joshua! 😃 I'd love to see how it flies with bidirectional dshot! Anyway, stay safe there with your family! 🖖😊
@StrickleeFpv Жыл бұрын
I have the 129 7 inch as well both fly great just needs new camera on both the 240 and 129 . Parts and prints are hard to find other than motors and stacks but fly decent . No frill just fun easy flight’s
@nextgenerationfpv Жыл бұрын
I get that it a great bargain to start, but all my club mates and myself have had longevity issues with Darwin drones. The 5v rail.dies easy, some blew on first fight. Vtxs fry easy, so wasn't surprised to see it didn't set correctly. Have to say, I wouldn't recommend them, even at that price. You'll soon be spending the extra $150 bucks to fix it and replace faulty parts that could have bought a better quad. Please JB, let us know how long that one lasts flight wise. Oh and 6s will melt that esc quite quickly too.
@MANDOXsquid Жыл бұрын
kinda was hoping to see what it looked like with a new camera lol.
@ZippyFPV Жыл бұрын
Haha yeah, I was all ready for the comparison and then... gopro footage from there out. Hope that doesn't confuse new pilots thinking they'll get digital quality by a simple camera upgrade.
@StrickleeFpv Жыл бұрын
I put the run cam 2 phoenix Jb edition on all my Darwin’s and it looks great . The cameras that come are janky . Definitely a world of difference
@chrisalexthomas Жыл бұрын
I've got a darwinfpv 129 and thats the exact same stack as in the 129 just put into a different frame. Even the flight controller layout is identical.
@7passu Жыл бұрын
I haven’t moved on with the times. I still fly 4s and taranis on analog. That’s where I’ll stay tho as I can’t freestyle or race. So I’ll stay back in the day with Charpu lol
@Jesperkraakman Жыл бұрын
Widescreen FPV yes I remember 😂 I was one of those who bought a fatshark dominator V3 with a Runcam Eagle 16:9 cam, was a pretty decent setup but I liked 4:3 more in the end with the HD2.
@PhenomDriver2020 Жыл бұрын
Baby ape pro v2 is one of m favorite quads
@StrickleeFpv Жыл бұрын
Run cam Phoenix 2 Jb edition is a great replacement cam for these I put them on both the 240 and 129. Big improvements definitely have to replace the cam it’s janky out the box for sure
@overdosed51 Жыл бұрын
I still have a nazgul v1. I have 6 other builds for some stupid reason i just prefer that old 4s nazgul over my newer lighter/more powerfull builds. The high kv motors are battery killers but man is that quad smooth for some reason
@BEYTEK Жыл бұрын
nice honest review
@Catiadr Жыл бұрын
I would fly 5s.
@scribs368 Жыл бұрын
I just got the nazgul5 v3 as my first quad. I did not consider this as an option at the time but I'm liking the v3 a lot.
@kpack1993 Жыл бұрын
Yeah if you could afford the V3 then that's a much better quad. This is just a great beginner quad for learning and if you're struggling to justify spending 250.
@scribs368 Жыл бұрын
@@kpack1993 true it seems decent and I wish I had a cheaper option at the time. I also already had a few 6s batteries so I locked into going more expensive anyway.
@freaxx8240 Жыл бұрын
Bought the drone right after seeing the vid, but since RDQ was sold out and banggood had no option to buy with a receiver, i bought from DarwinFPV directly. Then i saw it was not an affiliate link :(
@SnTu9743 Жыл бұрын
I learned something today also
@sayubu Жыл бұрын
wild how they have come down in price !
@1969jfp Жыл бұрын
So they have a lot of old frames,fc's,esc's,vtx and motors. They are just getting rid of old stuff they have in a warehouse. That's good for people just getting started.
@Sugalime3D_FPV Жыл бұрын
I agree. The probability of destroying your drones as a beginner is much higher than for an experienced pilots. That's why I think beginners should always buy the cheapest first...
@Sugalime3D_FPV Жыл бұрын
I destroyed my motors (Enable 3D and BD-Dshot, i have a vid too). Nevertheless I decided to buy new motors in 4S and not 6S. Since I already have a 5" 4S ultralight drone and now the 4S batteries. And I can't afford a second 6S drone with new batteries at the moment. I always want to have 2 drones with the same S number, so if I start with 8 charged batteries, for example, I destroy the drone at first flights, I still have the second drone to discharge the batteries. Discharging the batteries on the charger is just super annoying and the charging cycle that reduces the lifespan of the battery is then lost... But in the long term I will probably convert it into a 6S drone... If I got a new (an than second) 5" 6S standard freestyle drone...
@PeterM-PeterM Жыл бұрын
Darwinfpv is awesome value.
@Kitovskiyy7 ай бұрын
hi, my english is not the best but i will try. I have a budget of $210, would this drone work for me as my first 5 inch? Thanks
@gmivisualsjason3729 Жыл бұрын
Personally i do like this back to the past budget kwads......
@joshuabrooks4941 Жыл бұрын
Does the 55A esc give it any advantage? I bought it because both my Nagul v3 4s and my Roma 6s have 45a escs. I thought this one might be a little faster.
@StrickleeFpv Жыл бұрын
It’s fast depending on what your pids throttle and tape of lipo id put a six s and just limit the throttle a little and put a nice pid tune on it I find with full go pro my p and d gain and balance had to adjust slightly on the sliders . It connects to speedy bee app as well wich is cool in the field for tuning or adjusting
@flypost8 ай бұрын
In the second test did you use a digital module? the interference is zero. I put another analog camera on my Darwin and it looks much better but the interference is the same. I don't know, Rick! What kind of witchcraft did you do?
@ckfpv Жыл бұрын
Hey JB MAN NICE RIP 🔥🔥🔥🔥🔥
@Stylerbc3 ай бұрын
Hello) Oh dear, it's level in liftoff! It's you home)
@JonR35 Жыл бұрын
Can you do a video on how to fix that oscillations on those sharp 180 turns
@bingchilling9894 Жыл бұрын
Hey can you make a tutorial on how to replace the camera with a better camera
@ToddIrwin Жыл бұрын
Great Content
@baggszilla Жыл бұрын
Awesome review JB! Did you end up doing the BlueJay firmware update and enable bidirectional dshot or did you fly it the way it came? Thanks, Cheers!
@JoshuaBardwell Жыл бұрын
I flew it how it came.
@BAJARCRAWLERS10 ай бұрын
New subscriber here, thanks for the info
@JoshuaBardwell10 ай бұрын
Thanks for the sub!
@jebrc Жыл бұрын
Great deal sadly i still cant afford one lol unless ya sell that one cheap jb lol thanks for sharing i appreciate ya.
@lemonsquareFPV Жыл бұрын
Find the pilots around you friend. And they will likely get you in the air. I generally set up at least 5 people a year, 90% of the time kids, for the past couple of years. And many of my friends do the same… or at least help with some parts. This is a very welcoming community, make friends, even if you have nothing.
@Sully365 Жыл бұрын
So the camera reminds me fo the x220 eachine...i never knew why it was SO hard for me to learn to fly until i got a camera with a wider FOV. annoying af.
@Sugalime3D_FPV Жыл бұрын
I bought it 2 months ago. I even think 16:9 is good because of my glasses with an 800x480 display. I bought a Caddx Ratel 2 for it because I just want the best. 2 things I don't like. You can't update Beaflight because you don't know the exact target (There are different kind of the same FC...). And the installed ELRS receiver does not have a model name and the information is nowhere to be found. But as far as I know you need the model name if you want to update ELRS. I may be able to solve these problems by contacting Darwinfpv and get the right informations. It's on my to-do list... I will convert it to 6S as soon as I have a 2nd 6S copter. And use the 4S batteries I bought, on my 4 and 5 inch ultralight copters. Today I would still rather go for the Nazgul. It's only slightly more expensive but gets BLHeli32 ESC (With BD-DShot) and more powerful VTX and probably also higher quality hardware overall and probably better settings and support. It's supposed to be very good... PS: I have burned and damaged all my motors of it by activating 3D mode and BD-Dshot...
@Nathan-qt2zi Жыл бұрын
The elrs receiver is called betafpv 2400 rx
@BooToob Жыл бұрын
@@Nathan-qt2zi I don't think the included receiver actually is the betafpv 2400 rx, it just uses the betafpv 2400 rx ELRS target when flashing it. This gave me some confusion when I first got mine. The antenna looks the same but the board is different.
@Nathan-qt2zi Жыл бұрын
@BooToob I have no idea, just what I found out from the darwin website
@Nathan-qt2zi Жыл бұрын
@@Sugalime3D_FPV I flashed my elrs on mine using that name completely fine
@Sugalime3D_FPV Жыл бұрын
@@Nathan-qt2zi is your receiver in a grey case with one side plastic glas. And it has a grey wire antenna ?
@irom77 Жыл бұрын
Nice , so I can replace with hdzero easily
@joshuabrooks4941 Жыл бұрын
When did they come out with Elrs BNF? It wasn’t available last month, I had to get the pnp and put Elrs on.
@harrycash8713 Жыл бұрын
Hey JB does anyone make I'm sure they do a camera and transmitter that I can attach to an existing drone for fpv to my phone. Analog is fine. Low-latency is important.
@johngreen5837 Жыл бұрын
I love my johnny 5. Any chance I can get your pid settings buddy?
@borabengi458316 күн бұрын
Why does it fly half decent and not really good and what’s the difference? I can’t tell looking at the footage if it’s good or decent
@mohammedakakeza Жыл бұрын
Hello Sir, I have a question. I have a mamba f405 mk 2, but the processor in it got corrupted and I changed it, but the problem is the black box no longer exists and it shows me in the program, no data ship found. Are there any solutions??
@787sever Жыл бұрын
I smashed it intoo a football goalpost. broke the battery strap. Ejected the battery. Nothing broken
@lolfreddy Жыл бұрын
2:01 awww man! I’m out! 😂
@EvanBfpvАй бұрын
I may have finally found the cheapest way for me to keep my analog goggles and 4s packs but still move up to 5". I only have one concern... is 4s 850 too small of a pack for a 5" size quad?
@Sugalime3D_FPVАй бұрын
buy a second one exactly the same. than after full charge you can connect them with parallel 2x xt30 to 1x xt60.
@bengordon7635 Жыл бұрын
WILL DJI ever put an onboard mic ??????????????????????????????????????????????????????????????????????? hearing the sound of your motors is a must for freestyle ,, Rush tank with AKG mic is insane ,, coming out of any kind of trick super smooth by hearing your motors , once you fly with a mic its hard to go back !!!! the Analog Phoenix 2 and 2 se line is the best for cheap analog , Digital needs onboard sound !! Period !! Flying DJI with no sound sucks !!!!!!!!
@Sugalime3D_FPV Жыл бұрын
yeah i am also big fan of mic now since i saw a analog micro quad with mic sound...
@brandonhysell81834 ай бұрын
eachines old employees have to be employed by darwin, or they are across the street from each other. tyro was the model by eachine, not the company.
@hazzahfpv6675 Жыл бұрын
I bet you had the 6dbi attenuation still set on your power meter from when you had your attenuator on it on you last video about it :) I dont believe that vtx will do over 1W and be so far off when set to 25mW
@JoshuaBardwell Жыл бұрын
If there was attenuation set up, it would appear on screen at kzfaq.info/get/bejne/Y52CoqWA1d7Zdnk.html
@hazzahfpv6675 Жыл бұрын
@@JoshuaBardwell Hm mine doesn't show it on the main screen when I set up attenuation in the menu.. and when I connect it to a 25mW vtx and set up a 6dbi attenuation in the menu I do get close to a 200mW reading.
@juliennedan2725 Жыл бұрын
I wanted a review on this a year ago 😂
@Sugalime3D_FPV Жыл бұрын
why ? 😂
@Sugalime3D_FPV Жыл бұрын
On D240 Johnny5, has anyone managed to update to Betaflight higher than 4.1 without errors ? Because the manufacturer gives the target MATEKF405, but there are only different targets MATEKF405XXXX that you can select. And if you generally supposedly select a false target, problems or even damage can arise. I couldn't find out which of these XXXX is the right one. Apparently the FC is a production especially for DarwinFPV and not a standard model from MATEK... I guess I'll have to contact DarwinFPV about it at some point... Is on my to-do list...
@JoshuaBardwell Жыл бұрын
It's probably matekf405std
@BooToob Жыл бұрын
I used MatekF405STD_CLONE to get it to work on 4.4. I had to jump some hoops to get it working but it's probably fixed now considering this was about 4 months ago.
@Sugalime3D_FPV Жыл бұрын
@@BooToob Ok thx Mr Bardwell and Mr BooToob ! I come back to that if i don't get any information from DarwinFPV and try MatekF405STD as target. Also this thing with the hoops I do not understand... , if they still not have fixed it...
@hyperx6525 Жыл бұрын
@@JoshuaBardwell sure ?
@tweekFPV Жыл бұрын
👍🏻👍🏻
@earry509fpv Жыл бұрын
Darwin is the new Eachine with better quality!!
@boostey42 Жыл бұрын
what happens at 15:23? i have the same problem with mine. and i dont know how to get rid of it.
@chickwithstick7695 Жыл бұрын
What camera would you recommend for this?
@nicolasmoskal299013 күн бұрын
Je suis entrain de réaliser que sont terrain est dans liftoff 😅
@MysteryD Жыл бұрын
You don't need all 4 wires for crossfire. Just saying.
@lunaticfpv17 Жыл бұрын
MysteryD says no telemetry!
@JoshuaBardwell Жыл бұрын
Technically, you can omit it, but really you want it.
@SpaxMK Жыл бұрын
motors Racerstar SPROG X 2207 2400KV 3-5S with new name :'D
@freaxx8240 Жыл бұрын
Which camera should i buy to replace the one in this quad?
@Sugalime3D_FPV Жыл бұрын
I buyed the Caddx Ratel 2 (not the Baby Ratel). Many people say it is the best analog cam. But yeah it is pretty 150-200% more expensive as the standard cam...
@freaxx8240 Жыл бұрын
@@Sugalime3D_FPV Thank you very much, i'll check it out 👍
@fedirkryvyi Жыл бұрын
The real question nowadays is - can it lift an RPG-7 grenade? 😅😅😅
@ChrisQuadFPV Жыл бұрын
Has been, for a while out of stock in the US.😭
@rc846 Жыл бұрын
Old Chinese saying "You Get What You Pay For"
@787sever Жыл бұрын
Yo that was my fiist 5 in. My only 5 in lol.
@spunktr Жыл бұрын
Could I really run 6s on this kwad if I select motor output limits to 66%? Or is there any other downside? I would upgrade to 6s 1800kv when the motors burn.
@Sugalime3D_FPV Жыл бұрын
yes. AS far as I know FC and ESC can handle 6S. The motors have 4S spec. So you can run 6S batteries on it with that 66% mod. But there is even someone here in the comments who claims using 6S on these 4S motors without any problems. 😂
@spunktr Жыл бұрын
@@Sugalime3D_FPV danke dir 😁
@Sugalime3D_FPV Жыл бұрын
@@spunktr gerne doch 😁
@Sugalime3D_FPV Жыл бұрын
@@spunktr Ich hab mir 5x T-Motor Velox 2207 2550 KV Motoren geholt weil ich erst mal auf 4S bleiben möchte, weil ich will immer 2x Drohnen haben mit gleicher S-Anzahl. Eine weitere 5" Drohne und neue 6S Akkus kann ich mir momentan nicht leisten. Aber 2550/2400 * 4/6 = 71%. Wenn du auf 71& einstellst wäre so als würdest du 2550kV 4S fliegen... Könnte halt nur sein dass die Motoren leicht zu warm werden...
@spunktr Жыл бұрын
@@Sugalime3D_FPV ja kwads als spare müssen sein und auch ähnliche hardware/lipos. Für mich wäre das nur ein test und fun-kwad. Habe noch 8x 2207 1800 kv xing auf lager 😁 konntest du Bf auf > 4.1 updaten?
@mastafoo886 Жыл бұрын
its that cheap now.... how much more will it cost in September when you need a fuckin GPS and a RID chip?
@ShiestyCODM2 ай бұрын
This isnt a budget when you have to pay for goggles controller battery wtf
@gb.1990 Жыл бұрын
1st
@trfpvVT Жыл бұрын
rebranded racerstars
@MatthewFpv9 ай бұрын
Now it will cost $300…. This was my fav brand cuz the baby ape and and my fav 5inch sleeper Thanks for blowing it up Josh…. Smh 🤦♂️