What things should we build in Scrap Mechanic? It has been a bit but I'm looking to get back into some fun projects!

I saw a K-28 in the thumbnail so I clicked. :D Edit: Guess I'm flying to Toronto to punch you. :P The Rio Grande had 4 classes of K's - the K-27, K-28, K-36, and K-37. 491, my babe, is a K-37. That model in scrap mechanic of the K-28 is legitimately insanity. Props to the creator!

In case anyone hasn’t stated it already, the 473 is a D&RGW K-28 and is located at the Durango and Silverton Narrow Gauge in Durango, Colorado. The one that Hyce runs at the Colorado Railroad Museum is Denver and Rio Grande Western 491, a K-37. The biggest class of 2-8-2 that the Grande produced.

hi, I'm the creator of the rgb strip. Each light cell has 18 warehouse lights, the cones of these lights can mix thus allowing it to display many colors with fewer lights.

4:38 for those wondering its the pigs plane from the movie Porco Rosco from Studio Ghibli, I highly recomend watching it was a quite the fantastic movie. And yes its set in Italy so that is infact the italian flag!

hello, the creator of the del Rio Grande k28 here, thanks for choosing it for the video and I'm happy that you liked it, I'm amazed that it worked in physics 7 because the walshaerts v.g.s. and built to work best in pH 4/5; regarding the control of the walshaerts system, I tried to make it as realistic as possible to how the locomotives actually work, it has 3 speeds explained in more detail in the description, in short, for the first you press 2 which is for forward, then 1 to activate the pistons, for the second you press 2 again to set the second speed, then for the third it is a bit buggy, by pressing 3 you can still get a small boost in speed but it could happen that the train stops and starts to go in reverse, to go in reverse do the same movements but reversing 2 and 3.

Kan Hyce has a K37 at the crrm, the number is 491

18:16 Nice D&RGW k-28 473

2:30 except train axles are fixed to both wheels so if you apply torque to eiither side wheel, both of them will turn at the same rate.

13:52 The clutch explains it; that's what makes it like a ratchet. The piston moves while the clutch transfers rotational motion and moves the other way while the clutch is disengaged; then, it's quite easy to control which part of the phase the clutch engages for, allowing forward and reverse. (I presume those double bearing clutches are basically always slipping while engaged because of Scrap Mechanic's Physics.)

11:13 Slight shame that kAN didn't plug the pressure engine into the Dyno. Would have been interesting to compare it against a conventional piston engine.

I've said it once, I'll say it a thousand times. As weird as the shay is for being offset like that, you can work on it/fix it anywhere without having to drag it over a pit.

7:20 That's true, but these are not red, White and green. This combination have only four countries. Italy, Hungary, Belarus and Bulgaria.

Shay's were developed for the Logging industry which normal locomotives couldn't get up those massive hills. There was also a prototype engine that untilized regular logs as rails. It didn't go far from that but Shay's and their geared down wheels allowed the trains to pull massive loads to and from logging camps

Hyce has K-37 No. 491 at the museum. K-28 No.s 473, 476, and 478 are on the Durango & Silverton. 470-472, 474-475, 477, and 479 were taken by the government to run in Alaska and Canada in WWII, and were scrapped instead of honoring the return and were not even paid for, so it screwed the D&RGW over pretty badly. They’re known as the “Sport Models”, the 28s, because they handled so well-like a sports car vs a sedan/saloon car-the K-27s had 20 total, but only 463 and 464 still exist and were called “Mud Hens” for the “waddled” down the tracks in the early years. The 28s were a massive improvement from the start rather than a conversion like the K-27s had.

the engine at the colorado railroad museum is a D&rgw 491 which is a K-37. the D&rgw 473, the K-28 in this video is operated by the durango and silverton. also just a dumb little nit pick. the counterweights are wrong. but beyond that its really really cool.

Thanks for featuring my plane kAN!!!! I'm so excited to see one of my builds on a channel I've been watching for so long :) (P.S the bubble block is exactly as you see it, the glitched bubble block is surprisingly heavy)

The seaplane took off, and it has a yaw damper! Damn y'all make some cool stuff. Thanks for the video ☺️

4:24 Ahh! "Pig edition" lol, it's the plane from "Porco Rosso" by Hayao Miyazaki. I just saw that a few days ago

Typically seaplanes always have a hard time taking off irl aswell because of all the friction. Btw the plane’s from Porco Rosso, an underrated Studio Ghibli movie, 100% recommended.

@7:25 I think this is the plane from the anime "Porco Roso" from Studio Gibli

Hyce has a k37 at the museum. Still a k series tho

As a child i played on a Baureihe 80 regularly. It was decommissioned and parked in the back of a switchyard where we could sneak in as children and play on. It was torched apart years later.

Kan, you are close about saying that K 28 steamer is like what hyce has at the museum, but the one there is a K 37.

The 4 cylinder looks like a bigger version of an air compressor on a semi truck but with 4 cylinders, or it looks like the new concept idea of a new 2 stroke engine where it works with intake stroke, compression stroke, combustion, then exhaust with each cylinder doing one job

Hyce has tempted too many people to make narrow gauge trains

kAN on the pressure engine you are spossed to unplug the gas engine once it's going i believe.

the water thing where it feels like you are stuck and cant pull out is realistic, water vehicles have a suction type deal when they are exiting the water

1:44 unfolded onion box can solve that and I actually made a simulator doesn’t explode however I figured that part would just be annoying because it actually fits on the tracks and you can pull stuff with it

Should have a glitch welding multiplayer Monday challenge

Was waiting for the dyno on the pressure engine!

All you need to do to get the plane to take off from the water is to put flaps on the front set of wings to get more force downward that’ll get you out of the water

Kwn, i could be mistaken but i think that hyce has a vid with the german tank engine in derail valley that was before the simulator update

The flying boat is fictional prototype of italian Savoia s-21 from anime movie I cant remember name for. It does closely resemble the real SIAI S.21, and more closely resembles the Macchi M.33

Why always the beautiful creation are in the best builds ?

Its the plane from the studio ghibli film porco rosso. Great film would recommend

3 locomotives in one episode and nothing blew up! xD

2:36 but Kan. It ain't stupid if it works

the Plane is presented in an Anime, it names Porco Rosso. In that the main character flys this Plane

Ayo the plane from porco rosso

i should finish my 3d printer so i can mabye get in one of these vids

How dare you sir! Shays were actually a pretty revolutionary solution for a cheap, easy to build steam locomotive. They originally were built literally from flat bed railcars and it worked very well and was pretty reliable. Shame on you! However all these creations are awesome and I loved watching you video. Cheers friend

7:22 I laughed so hard

493 is what they have at the museum

kAN can you please build that 6-axis robot arm you were talking abt 3 months ago, with the variable speed?

Day 2 of asking Khan to go in first person inside of vehicles

Make a video with all the types of engines in scrap mechanic

The Colorado railroad museum has a K-27 not a K-28. It’s D&RG 491.

you should do a build batle with Hyce .

why no zeepkeist?

Kan why don't you upload multiplayer mondays

Boat planes in scrap mechanic needs flaps

baureihe means model series if this helps :D

that plane with the italian falg is from PORCO ROSO film

For the Pressure Engine, you need to dyno us to see how much power it makes. Then since it uses a gas engine, dyno just the gas engine and subtract its power o see how much power the glitch adds. EDIT: may as well dyno the ratchet engine too.

hook the pressure engine to the dyno

Yep, it is an italian flag lol

Hey kan there's this new game called Gear Blocks that just came out it looks like something you'd have fun with.

Hyde has a K-27 and it’s number is 491

Hyce had a k-37 I think

The red plane is from a anime called porco rosso

you should try to build a big boy steam engine or some one else should

I remember when their was 9 of them running on the grande oh what a time until Government showed up

PLease correct me if Im wrong, but is that Porco Rosso and his seaplane?!?!?!

Hyce is going to be mad because you dont know the k-37 491 yet

Only 20 mins ago?? I'm never this early 😂

I keep hearing about the piston turbine. What is it and how do I find it?

Kan could you build a piston engine that uses this principle that doesn't need a gas engine to start

the plane is based on the ghibli film Porco Rosso

What happened to the piston engine episodes and you could maybe try building a compact engine that has high performance and then making it look more like a real engine and then maybe putting it on a car or train or whatever

C the class b Shay appeared in scrap man's video

"Baureihe" equals "model series".

The plain flag is italy🇮🇹 or mexico 🇲🇽

Mark has a K 37 not a k28

Sea Plan ---Tail must be higher than wings to give more take off angel. Stay Mellow Ppl´s

Is this game even still live? What ?! i tought it was abandon. Ow wait. It is... Anyway

That pressure engine is similar to the ones used in the titanic

I feel slightly offended (for no reason at all), that kAN never watched Porco Rosso

bread

"Baureihe" is just "model series" in German...

:jakepeter:

italian flag

Ok thank you for your time today I appreciate you getting ready for the school year so I’ll let you know if you have time for the next week if so you need me a little more than anything else you can come over to help my friend help my mom help my dad and sage for a little more time today or later when you come back to me see you if I have time for a little more work and then you come over and sage with my dad. Period

if you wanna learn german hit me up ill theach ya Im german btw XD

👋

Last

Italian flag: 🇮🇹 Hungarian flag: 🇭🇺

@zonda1404

About the pressure engines. I'm pretty sure that pressure engine was constructed just to maximize power per piston, which is why it is so big (it has 800hp/piston I think, while most regular engines have 25-30hp/piston). However, it does not need to be that big; I was able to make a regular-sized B8 (7x5x3), which has 370hp/piston (aka 2900hp total), but the flywheel is way too heavy to be good on most cars. The best I got was an unstable 140 km/h with a bunch of wasted power through the clutch (wasted power because a solid clutch would stall the engine or flip over the car 100 times).