No video
Inside a cheap LED projector.
Рет қаралды 167,506
Күн бұрынOne of the show's projectionists brought through a cheap LED projector he had bought to try. He was disappointed at the intensity of the image, and it really isn't that great for anything other than a very dark room or an image of around a metre across (about 3 feet).
The light path is from a well cooled rectangular LED firing into a collimating assembly and then going through a polarising filter, LCD panel and fresnel keystone correction lens before bouncing off a front silvered mirror and exiting the unit via the focusable lens. The construction was pretty good and it gave usable results for a low-key application.
If you enjoy these videos you can help support the channel with a dollar for coffee, cookies and random gadgets for disassembly at:-
www.bigclive.co...
@DrakkarCalethiel 8 жыл бұрын
Ahh, the beautiful noise of bagpipes in the background... makes me want to go back to scotland again. Best two weeks ever!
@sienile 8 жыл бұрын
Bought one of these off eBay a while back. They work great in pitch black, but it takes very little light to wash it out. Nice to see what they look like inside.
@JoshuaNicoll 8 жыл бұрын
oh wow, vapour change heat pipes and an aluminium fin array, they're VERY serious about the passive cooling on that chip, that is very good for an LED, I've seen PC's with less cooling than that,
@mgkleym 8 жыл бұрын
its not passive it has a fan.
@JoshuaNicoll 8 жыл бұрын
+biohazard 918 that tiny pathetic excuse for a fan, is not active, it is also not mounted to the fin array, ergo passive. I think an asthmatic granny coughing on it would provide more airflow than that thing.
@Anvilshock 8 жыл бұрын
Forced airflow = active. Doesn't matter if mounted directly or not. The air is still channelled, goes through the fins and then out the slits on the side. So stop spewing bullshit. Just because it doesn't meet your "standards" doesn't mean it mustn't meet the definition's standard. Also, radial fans > axial fans. You'd be surprised how that "pathetic" fan would outperform an axial one of same size.
@Spudcosmiccc 8 жыл бұрын
Things are heating up in the electronics cooling community.
@Anvilshock 8 жыл бұрын
Joshua Nicoll Have a slowclap, Mister PC-cooling fanatic with your fan mounting snake oil, for you have absolutely no idea what you're talking about. None about static vs. dynamic pressure, none about static pressure having no direction, none about effective cross section, none about forced vs thermally self-induced circulation, none about good puns. Just kindly do us all a favour, and stop breathing, will you? Get it? Air-breathing?
@stupidystu 8 жыл бұрын
A big message from my tiny little white headed Mom "Thank you for the snow" She had a fantastic time at the show.
@bigclivedotcom 8 жыл бұрын
Tell her she's welcome. Hopefully she didn't get covered in too much of the snow.
@DrDuckey 8 жыл бұрын
What show is it? I live in the States, but still would like to know. :)
@bassl0va 8 жыл бұрын
Royal Edinburgh Military Tattoo
@DrDuckey 8 жыл бұрын
Wow, cool show you have there Clive.
@CookingWithCows 8 жыл бұрын
You should have pipes as background music all the time.
@william_2610 8 жыл бұрын
Those bagpipes in the background.
@bigclivedotcom 8 жыл бұрын
I didn't even notice. The show has the massed pipes and drums amongst other acts so it all just happens in the background.
@bsvenss2 8 жыл бұрын
The Tattoo? I was there when BBC filmed it. :)
@navtium 8 жыл бұрын
I miss living in Scotland.
@daanwilmer 8 жыл бұрын
They're playing Scotland the Brave. Since it's the natural tendency of pipe bands to start playing that song when they get together, it's probably the Massed Pipes and Drums. Fun fact: when they encounter a brass band, they stop playing Scotland the Brave and instead start playing Highland Cathedral. The brass band is first confused by the single piper and single snare drum, and then startled by the entire mass of pipes and drums playing the same tune. At the beginning of the verse (I think it's called, its' the different melody), they join in with a counter-harmony. When this is succesfull, they join the main harmony for the next chorus (again, I'm not sure about musical terms, especially in English), forming essentially one huge band of sometimes several hundreds of musicians.
@mbirth 8 жыл бұрын
Now I want a KZfaq link to such happening...
@dimaoliynyk242 8 жыл бұрын
This reminds me of the DIY projectors like 10-15 years ago. Only back then we were using 200-300W Halogen lamps instead of LED's.
@DoctorX17 Жыл бұрын
It's 2023 and I got a cheapy one that's half the size, shockingly bright... It's amazing how tiny and cheap they are! It's 1080p and does up to 105" in pitch black conditions, which is insane... Imagine what we'll have by 2030!
@v8snail 8 жыл бұрын
Finally. . .Someone who pronounces "FRESNEL" correctly! Take note Dave Jones.
@tinadeng2557 5 жыл бұрын
i make the fresnel lens for projector kit
@gloriamejia6008 4 жыл бұрын
Do you know where I can buy one just like that one at?? 👀
@sparkyprojects 8 жыл бұрын
That reminds of the first prototype projector, a guy used a standard slide projector, he got hold of a LCD (monochrome at the time) that was about the same size as a slide, and successfully projected an image, he was thinking of stacking 3 lcd's somehow, of different colours, but the focal length of 2 of them would have been out. I have since searched for it without success, it was i think on Tomorrows World.
@goyabee3200 8 жыл бұрын
"That's what looks like inside 'cause we just took it to bits." Big Clive is so cool.
@markukblackmore 8 жыл бұрын
Would love to see a comparison video showing the internals of a high end equivalent. Though I rather suspect there would be some logistical challenges in Clive obtaining one? I have to say Clive, your channel content is going from strength to strength lately. This was really very quite interesting!
@Xenon777_ 8 жыл бұрын
I had a similar one of these LED projectors. Unfortunately it broke after a year. The image was poor and the dust got into the lenses. It has a 10w LED and the thing what failed wasn't the LED, it was the driver. I now has a £350.00 Acer projector with 2400 lumens and it is much better.
@RingingResonance 8 жыл бұрын
I got a nice used 720p projector that was advertised as broken off ebay for $30. It had a busted current sensing choke on the PSU that I was able to repair, after that all it need was a new $60 bulb. Recently however I watched a terrible documentary and now it has a dead pixel. I blame the documentary.
@Xenon777_ 8 жыл бұрын
MadeOfSolder I remenber the LED projector said supports 1080p, but the native resolution was only 480p.
@hypertuch 8 жыл бұрын
Sir, Indeed thank you, just subscribed. what makes this channel special is the short, clear, theory+hands on approach. reverse engineering is done here in the best way, please keep posting, God bless you.
@htiekmahned8859 2 жыл бұрын
I love "take it to bits" videos
@alexmarshall4331 6 жыл бұрын
ABSOLUTELY WONDERFUL SOUNDTRACK ...reminiscent of 'captain lockheed and the starfighters' LOL
@MattOGormanSmith 8 жыл бұрын
If this is like the old LumenLabs projector plans, the main purpose of the "polarising filter" just before the LCD is to filter out IR to stop the LCD overheating.
@matthewmiller6068 8 жыл бұрын
That's really interesting...I know I have a little "pico projector" I think it was Optoma but not sure but it's about what you described with this one, good enough for something the size of a normal TV but not a lot more. I know one thing I've found with most of these mini LED projectors is they have to "warm up" about 10 minutes before you focus them because the plastic lenses and components seem to change shape slightly and throw off the focus.
@AdamBluntTech 8 жыл бұрын
Just bought me an excelvan video light and I have to say its brill, nice and bright + it has a pretty good CRI for such a cheap light, although excelvan is probably just one of these Chinese brands that they put on any old product, that projector and my video light probably sold under 20 brands not sure why they do that but if it makes them money I guess they will do it
@cgcrghvtygjy5462 8 жыл бұрын
I was in Edinburgh a couple of days ago Clive, I was hoping I'd bump into you but no such luck! :(
@peterg.8245 7 жыл бұрын
New Big Clive T-Shirt: "That's what's inside because we just took it to bits" ...and you just read that in his voice didn't you?
@eddyfontaineyoutu100 7 жыл бұрын
Hello ! Thanks for your trick for checking the type of metal in the wires ! 👍👍
@HermanVonPetri 8 жыл бұрын
That's all very interesting but tell me this: If you break inside a set of bagpipes is there a chip inside that requires them to play "Scotland the Brave" every time you start them up? I'm guessing the expensive models have circuitry that identifies when it's appropriate to play "Amazing Grace".
@sadface 8 жыл бұрын
I've heard of Excelvan before. They don't make anything of course, its one of the typical brands that slap their name on anything technology related. Also side note: Saw the Tattoo on the TV, of course I thought of you and your behind the scenes videos!
@scorpiopaulius 8 жыл бұрын
Hey man, I like to watch you teardowns of these kind of items :) I have same projector as this and was thinking if its possible to change LED to something more brighter? Any ideas? Maybe you can make a video :) There would me so many people to want to watch it :P
@chrisdwyer1477 8 жыл бұрын
I have one of these, really for the $75 Canadian I spent, it's pretty decent. I've got it projected to about 100" and yes, it's dim and dark scenes are difficult to make out but it works decent in pitch dark playing retro video games through (Zelda ocarina of time :D )
@iPelaaja1 8 жыл бұрын
You probably had an amazing view from the castle of the fireworks on Monday evening :)
@bigclivedotcom 8 жыл бұрын
We had finished loading out our show by then. Most of the show was the other side of the castle too.
@LPFthings 8 жыл бұрын
The little white thermal fuses are the re-settable type
@MobiusHorizons 8 жыл бұрын
I'd love to see you up the light with some extra led's, that would make for an interesting project.
@LeeHutch89 8 жыл бұрын
Loving the bag pipes 👌🏻👌🏻
@ratskirobo4836 5 жыл бұрын
You got a really good sounding voice sir, youll do well as radio jock or show host or anything that needs good voice
@cebruthius 8 жыл бұрын
White van scam projector?
@jrmcferren 8 жыл бұрын
Nope, Cheap china shit kinda like this: www.banggood.com/YG-300-LCD-Mini-Support-1080P-Portable-LED-Projector-Home-Cinema-p-1052155.html
@RingingResonance 8 жыл бұрын
Advertised as 1080P, rated at 320 x 240 pixels.
@a3f4cdf 8 жыл бұрын
Advertised input support for 1080p, description shows max resolution you'll get out the box p:
@bassl0va 8 жыл бұрын
I love the "Home Cinema Projector" on the box. Lol
@gingerbreadfork_ 8 жыл бұрын
it's surprising people still have no idea what the white van scam is considering how common it is worldwide
@stridermt2k 8 жыл бұрын
Not as granular as some of your videos, but still quite enjoyable! I love crap like this, but mostly when it's someone else's!
@squishy312 8 жыл бұрын
ExcelVan also makes 3D printer filament. I'm using some right now doing a test print. It's actually pretty good quality stuff that's cheap.
@sunphetchannel2455 4 жыл бұрын
Modify using display LCD x 2 panels in two layers. To make the color dark and Increase wattage LED
@Bigrignohio 8 жыл бұрын
Not too horrible. Just built to a budget.
@Elfnetdesigns 8 жыл бұрын
Like General Electric appliances, built to a cost..
@chrisdwyer1477 8 жыл бұрын
do you reckon you could upgrade that LED?
@Obliterous 8 жыл бұрын
FYI, most heatpipes are just water-filled.
@tliffinat0r 8 жыл бұрын
read bagpipes. was confused.
@Broadcast1Channel 8 жыл бұрын
First one of those cheep LED projectors I have seen taken apart that is not entirely held together inside by hot melt glue
@chiefrunningfist 5 жыл бұрын
Cut out original COB & housing and affix 4000k CXB3590 CRI90 with pin heatsink and aftermarket driver in its stead for an upgrade in lumens? Would require a bit of DIY, but would it work as anticipated or would the circular pattern cause corner darkness? Awesome show, fuels the curiosity :)
@phils4634 8 жыл бұрын
Handy little gadget but I'm not changing my cheap (second-hand) Sharp DLP projector just yet! With the cost of large-format LCD screens falling fairly steadily, and the New Year Sales within reasonable reach, I might consider replacing it with a "real" big screen wall mount TV. Then The Mrs will have the "big screen" home cinema experience she's rather keen to experience :-)
@deborahfalcon4866 11 ай бұрын
Hi, I think I have a model similar to this one. If I'm seeing a big black circle on display when I turn on my projector, it would be that the Led is somewhat fried?
@bigclivedotcom 11 ай бұрын
It could be the LED, a heat-damaged polariser or just plain old dust build-up in the optical system.
@28YorkshireRose12 5 жыл бұрын
So, I guess I won't be using this to replace my Sony 300" jobbie then? I suppose these little projectors would be fine for kids' parties and suchlike where the audience wouldn't be particularly critical, and image quality wouldn't wouldn't be an issue. I've often wondered about this small projectors, and I suppose that if you can muster a 50" picture out of one, then it may have some merit as a portable imaging system.
@maicod 8 жыл бұрын
no complaints as after all showing the guts is 'what we do here' but I would've loved to see its image though its probably hard to get that filmed
@DiyEcoProjects 8 жыл бұрын
Hi Clive, hows it going? hope things are good. Just an idea... i wonder if that chip board could run a higher wattage LED. If so do you fancy putting a 50w led into it and see if that improves things? All the best
@MDFRESCUER 8 жыл бұрын
It looks clever.
@Cr0zzAlpha 4 жыл бұрын
iw as thinking of replacing the led chip with brighter one ,i just dont know what its wattage,but i'll be trying a 50watt though it requires only 12v,so i think im gonna by a stepdown converter for it.
@shurdi3 8 жыл бұрын
This has been....an excelvant projector
@mendebil 7 жыл бұрын
I wonder if I could use the optics and driver board with a 5" 1080p LCD. Changing the LED to something like 50W this would turn into a 100 pound FullHD monster. If only the LCD would be pin compatible...
@atomicworkshop7635 8 жыл бұрын
are you sure the lens interior is mirrored?? it could be just total reflection
@MrStemkilla 8 жыл бұрын
can any one source an led chip with the same shape but higher wattage? and are they any spasific color output or are they just a normal 6000k?
@aljowen 8 жыл бұрын
Perhaps you could modify it to make the LED brighter?
@feralspirit9424 7 жыл бұрын
What if you mod it by removing the fan and heatsink, while still having it powered as to not cause any power disruptions. Then finally hard installing a higher powered LED flashlight in its place, using its own power source?
@modbox9560 6 жыл бұрын
This can be done modifiying the driver circut with higher power mosfets and those LEDs do not get hot maybe warmish my dlp air burns coming from vent a 20-30-40 watt led 12v high power would upgrade that 10w they claim 2000 lumens or 1000 lumens get a lumen tester you'll see the stock LEDs run cool cause maybe 300 lumens
@modbox9560 6 жыл бұрын
The reason modifying or swapping lower current 12v driver parts is you get to still control it's brightness contrast via remote menu
@garyandleslied 5 жыл бұрын
The problem I come accross with this is the fan gets dirty and it starts to get noisy and every so often I have to clean that and the other parts from dust.
@TriumphAventura 5 жыл бұрын
i wonder if removing the movable keystone fresnel does any good to image quality because the keystone of this projector sucks
@vgamesx1 8 жыл бұрын
1:51 What's going on with the guy in the background yelling what sounds like stop?
@padathir 8 жыл бұрын
I thought that was someone in the neighborhood here being loud, didn't realize it was the video until i saw your comment :D
@randomvideosn0where 8 жыл бұрын
I thought bad things were happening in the hall outside my unit
@Adam-eb3rs 8 жыл бұрын
Would it be possible to put a better LCD display the same size as the original to get a better picture?
@jregamey 2 жыл бұрын
My cheapo projector is 19 volts. I haven yet tested the voltage to the led.
@Seegalgalguntijak 8 жыл бұрын
How much is one of those cheap LED projectors?
@RingingResonance 8 жыл бұрын
Probably around $50. If you have the ability though, stick to used DLP if you want to go super cheap with the cost of repairing them or finding bulbs.
@Seegalgalguntijak 8 жыл бұрын
MadeOfSolder Finding bulbs isn't a thing I wanted to do. It should also be rather lightweight, and of course cheap. I learned from another comment thread that DLP or LCoS based projectors are better (so in fact for one like the one bigclive took apart in the video, I'd only be willing to pay 20 bucks), but they aren't as cheap yet. OK, I can wait, don't need one right now, it would be kind of a play thing anyways...
@73xlh 7 жыл бұрын
What if you installed a decent LED with alot higher wattage. Would it be worth doing?
@audiocrush 7 жыл бұрын
do you still have that thing? have you tried slapping in a 100 watt led and look what the image looks like? I think that yould be quite interresting
@simonhare7369 6 жыл бұрын
I've just got one of these projectors and have tried a 100w led. It's not fully fitted yet, just wired with a heatsink externally to try for a minute or two. The led psu/driver seems to cope, pushing a full 100W; may make it dimmable yet. The projectors heat sink seems more than up to the job, the heatsink fan pushes a cool 30c of air out with the 50W lamp. Need to try it in situ and measure the 100W led surface temperature before I box it up and fry the full set up.
@Cr0zzAlpha 4 жыл бұрын
led chip's power source is 220v right? i have one, and has some kind of a white ic , 15a 220v.it means the led requires 220v right?
@Angelo3209 3 жыл бұрын
What if you change the lcd to an 2560x1440 and the cob led by a 100w or 300w ? this become a 2k projector ?
@ManoharOfficial 2 жыл бұрын
great idea! have you found any projects like this online? been looking for ages.
@Angelo3209 2 жыл бұрын
@@ManoharOfficial kzfaq.info/get/bejne/j8ymh82CnrOnp40.html
@TheSiodmy 8 жыл бұрын
are you going to try and make it brighter?
@twocvbloke 8 жыл бұрын
Those sorts of resolutions are a tad poo these days, but they're fun to see the insides of, can't recall whose channel it was, but there was one fella who took one to bits and it had an Android mini-PC board wedged inside of it and bodge-connected to one of the projector's HDMI ports, very weird, but he came away with a useful mini-PC at least... :)
@paki26th36 5 жыл бұрын
You can replace the display with other one which is better?
@MuhammadYaseen-vx5hw 5 жыл бұрын
thanks. good video and please make a same video but detailed of eLux EX2010 Projector and chance to thanks more.
@AX-fx7ng 7 жыл бұрын
How is the LED connected? Possible to mod/ replace it with a Higher Res 1080p / 2K / 4K LED from a Smart phone?
@JaydenLeeSG 8 жыл бұрын
It's a rebranded UNIC UC40
@DreStyle 8 жыл бұрын
Nice background music 😂
@tankandspank 6 жыл бұрын
Would removing the keystone lens improve image quality?
@tekksmart301 6 жыл бұрын
Robert Bruce; no it makes the picture worse! I tried that.
@sumobear1777 5 жыл бұрын
Which would you say is brighter an LED projector or a projector that uses the mercury vapor lamp?
@bigclivedotcom 5 жыл бұрын
Hard to say these days. The metal halide lamps put out a lot of light, but modern LED projectors are getting impressive.
@joeyoung1498 5 жыл бұрын
Can you replace the bulb? Or is it a throw away?. I just picked one up at Walmart but it was only 170 bucks so I'm not sure I can replace the bulb when it burns out.
@bigclivedotcom 5 жыл бұрын
You may be able to find the specialist LED module online, but they are generally not replaceable.
@benedictnothing 8 жыл бұрын
Those heatpipes sound like bagpipes to me. Scottish-made heatpipes?
@mrcaboosevg6089 8 жыл бұрын
Why can i hear the sound of distant freedom?
@robenhenni8463 8 жыл бұрын
bigclive in shorts ,scary
@bigclivedotcom 8 жыл бұрын
Bigclive in shorts for most of the year. It's only when my legs turn blue in winter that I start wearing long trousers again.
@jonathanhendry9759 5 жыл бұрын
Take out the LED, cut a hole in the side, and point a Varilite through it.
@veraxis9961 8 жыл бұрын
The entire time I was distracted by that paper on the right with what appears to be assembler code. Anyone know what that's for?
@ghinckley68 8 жыл бұрын
so what kinda show does your theater do
@padathir 8 жыл бұрын
What is with the random assembly listing on the table? Specifically, what chip is it for? Googling the CLRF instruction seems to indicate a PIC...
@junker15 8 жыл бұрын
This listing caught my eye, too, because it looks similar to the usual assembly listings for the Apple II series that I deal with all the time. (I'd like to think I'm somewhat sane by doing all real 6502 work in cc65 with a real text editor, but the likes of EDASM still haunt me ;o)
@bigclivedotcom 8 жыл бұрын
It's the software for my dripping icicle project. I'm intending to update it a bit.
@rileyp8240 8 жыл бұрын
nice
@Cr0zzAlpha 4 жыл бұрын
i wonder which one owns the original.design, unic or owlenz.hehee they actually have the same interiors.;)
@5.43v 7 жыл бұрын
I got one like that
@modbox9560 6 жыл бұрын
If I can figure out the exact high power led it uses I can create a kit to change driver MOSFETs and lamp with higher watts but without it going in to overheat I need details about that specific led chip if any it could be 20w can probably be upgraded to 30w or 40w 12v high power led the downside after swapping out old driver MOSFETs to power higher upgrade is its going to use more energy on power bill
@RiffRaffMakes 8 жыл бұрын
I have what appears to be the other variant of the cheapo projectors, not bright but enough for a trampy movie night, could see my way to a quick compare, just not right now because friday night's fixing things and the Leffe's rendered that a foregone conclusion...
@Tyro_Manta 5 жыл бұрын
Weird question but do you by chance know where to get a replacement polarizing filter? That exact one
@bigclivedotcom 5 жыл бұрын
You could try online for polarising filter material.
@Tyro_Manta 5 жыл бұрын
Haha I did, was just looking for a quick fix, thank you anyway!
@anilthapliyal1 7 жыл бұрын
hi, please let me know where can I get the black glass/ polarizing filtering front which is between the source of light and the display in the projector. My one got a burn or black spot on that glass. Any solution apart from throwing the projector in the dustbin???
@gurungd.kishan6870 6 жыл бұрын
Anil Thapliyal did you got it ki just threw the projector ? im looking for a LCD display
@modbox9560 6 жыл бұрын
Bigclivedotcom can you send me any info on that LED does it have any numbers or bar codes like say you were looking for a replacement I know they are high power 12v LEDs
@br1ckbr3ak3r 4 жыл бұрын
I believe your fuse is a switching PTC (positive coefficient thermistor) which basically acts as... a, uh... fuse. I'll shut up.
@Avtovaz21057 8 жыл бұрын
ive been thinking of buying something like this are they any good? are they loud?
@bigclivedotcom 8 жыл бұрын
Tiny speaker. Not sure about fan noise as there were other loud equipment fans running in the same room.
@Blowcrafter 8 жыл бұрын
1:50 is that a circuit board behind the mirror? And if it is what would it be doing?
@WestSideJooo 8 жыл бұрын
it is probably the power supply
@Blowcrafter 8 жыл бұрын
+WestSideJooo right. didn't pay enough attention to the beginning of the video xD
@rj.sur.jhankar500kview4 4 жыл бұрын
Unic projector smps detels voltage video upload please
@jorno1994 8 жыл бұрын
scotland forever! :P
@MyEmkill 8 жыл бұрын
beer
@MagikGimp 8 жыл бұрын
We Just Took It To Bits[TM]
@creativebucket6352 7 жыл бұрын
hey how you link products to this video?
@cashobuyer 6 жыл бұрын
My abox projector now has a dark patch right down the centre of the view. What can I do to fix?
@holidaystyles44 6 жыл бұрын
i got the same problem with my a box t22..i just open it and notice that the problem is that the polarized lens looks burn out now..im trying to find out how to get a replacement part
@cashobuyer 6 жыл бұрын
Engels DeLeon well apparently you can't. The part is from an unknown Chinese factory and quite unique to this product unfortunately
@cashobuyer 6 жыл бұрын
Engels DeLeon really annoying
@zacharysamenfeld2487 8 жыл бұрын
I know that logic board, I actually know how to obtain those for 1 off custom jobs for ~28$-38$ depending on the source. They are super generic and ching markety.
@robyguitar5085 6 жыл бұрын
Ciao, al minuto 1:33 viene indicato il filtro polarizzatore, dove si può trovare come ricambio per questo tipo di proiettore?
@bigclivedotcom 6 жыл бұрын
È così specialista che mi aspetterei che l'unica fonte del filtro perfettamente dimensionato fosse il produttore originale.
@Jeff5263 8 жыл бұрын
That's the largest LED I've ever seen.
@bigclivedotcom 8 жыл бұрын
It's not as big as the typical 50 or 100W LEDs commonly used in floodlights.
@Jeff5263 8 жыл бұрын
I haven't had many chances to be around any large LED's
@pvc988 8 жыл бұрын
What is that program listing on the paper? It seems to be PIC code but what does it do?
@bigclivedotcom 8 жыл бұрын
Icicle software that I wrote for a project.
@pvc988 8 жыл бұрын
Mmm… nice but what is that "Icicle" thing?
@maicod 8 жыл бұрын
+bigclivedotcom I LOVE LED-icicles and unfortunately they tend to look best with cold white LEDs :D
@pvc988 8 жыл бұрын
***** bigclivedotcom Ok, now I know what it is. Heh… stupid me.
@maicod 8 жыл бұрын
pvc988 I only assume it is for a private project for creating a LED icicle. Its one of my plans so when I read icicle I immediately JUMPED :D
@andy2676 4 жыл бұрын
Clive I have the new uc68 one of these and I need a 24pin tft lcd display for it any ideas where or how i could find one?
@bigclivedotcom 4 жыл бұрын
I'm not sure where you can get the panels.
Rinoa's Auspicious Travails
Рет қаралды 5 М.
Creativity Buzz
Рет қаралды 2,2 МЛН
BR Tech Films
Рет қаралды 1,7 МЛН
That Electronics Fool
Рет қаралды 6 М.