Remember to set your printer to print actual size. If the printer is set to 'fit to page' the tape may not be to scale.

Great video as always. But one correction, Archers Advantage specifies arrow length as shaft only. Not from end of shaft to the nock throat. They also explain every detail in the help section.

I was just doing this today. I had to mess around with the numbers on the sight in. I don’t have a chronograph so I used calipers to measure the distance between the 20 and 60 marks. From there I adjusted the numbers until the printed tape matched my marks. After watching this video I clearly did it the wrong way. Thank you for this tutorial!

This was very helpful. I have a CBE Tactic Hybrid and came up with my own method for creating my site tape but this was great as it is more accurate. My process has worked very well as it is as precise as my steadiness at 74 years old. I really liked the idea of using shipping tape to waterproof the tape. Thanks!!

I have found that using a digital caliper for peep height has led to much less monkeying around with the program for short marks/long marks being off. Again as precise as possible. Appreciate the video.

This is why i shoot Black Gold sights and have been for years. Sight in at 20 mark it were your tape would go on the sight, back up to 60 , mark it, then take a digital caliper and measure it then find the corresponding tape that comes with the sight. I shot multiple different bows and arrow weights for different species and the tapes are always almost spot on but BG offers 52 tapes, thats more than the other companies offer with they're sights. Everyone likes what they like but becaue of this very thing i dont know why more people dont shoot BG sights. I rarely ever see other hunters using them, especially in the east. When im out west i see em more.

Thank you for this video. I've been digging around and this "sight mark" thing was never explained.

Thank you. When using a tape measure generally the metal hook end of the tape moves in and out as to ensure accurate measurements when hooking and pulling tape or when butting up against objects. Butting the hook aginst pin and measuring to peep will give most accurate reading.

The most accurate sight tapes I've gotten right off the bat are with a new program called Precision Cut Archery. Just enter arrow weight, peep to pin, peep to arrow and three sight marks. You can also print up sight marks for different elevations.

Very good stuff! My last 2 arrow builds have had a sight tape 4-5ft faster than actual speed because I believe that 13-16%foc momentum carries nicely.. was never an issue with a 3pin w/ single indicator at 40 (rarely dialed 40 up)! Now with the dual indicator at 30-50, I've been going back and forth on 2 BlackGold tapes when it comes to dialing up! Should all be fine, especially now with this video! My mind is still pretty blown at how little I have had to move the 30/40/50 pins since you got my new BlackGold on.. the old sight was zeroed to much heavier arrows so I don't think that was your trick haha

I bought a stack of blank label paper. I print a set of tapes on regular paper to check if the sizing is correct (sometimes I'm off by half a mm or so) before I print on the label paper. Then I use a cheap paper cutter and peel off my fancy sticker sight tape.

Perfect video. Been looking for this information for awhile

!!!!!!!! To adjust the short/long yardages you need to adjust peep slightly!!!!!!!!!!

Hey Thanks for the video I have archers advantage on my laptop used it to make a sight tape for my TRIAX with BlackGold pro sight so far so good dead on out to 60 yards Haven’t had an opportunity to shoot beyond that here in SE Massachusetts yet so 🤷🏼‍♂️ not sure beyond 60 yards lol

that's Awesome i have the program just didn't quite. get it thanks for vids its greatly appreciated! thanks

Great video! Thanks

I'd be REALLY curious as to how you use this to print a sight tape for the Fast Eddie (and not have to totally fudge a ton of numbers to get the tape to work). You mentioned that you can do it, and all of my communications with Perry essentially confirmed that I could not print a Sight Tape for the Fast Eddie. So IF you have figured it out, I'd love to know. Thx - Phil

If you fudge the numbers in the sight in process to meet your measured chronometer speed you won't get an accurate sight tape. You need to sight the bow in at your short distance and your long distance and measure the distance apart those two marks are on you sight and let the software generate your speed which will probably be considerably slower than your actual speed.

Great video! I’m confused on what sight to pick, I have an hha optimizer lite that’s a single pin slider

What sight type would you select for an accutouch? Currently using metric as sight type. Writing from the netherlands

A lot of good information. My question is, once your setup is perfect, when will the archer blame themselves for missing your animal,target etc...?

Going to try and work with a buddy ro get metal lazer engraved archers advantage tapes for my landslide. The pencil marks out to 140 aren't exactly perfect..lol

If I have a BlackGold slider, which option would I be selecting for the sight?

Would you recommed the same option you used in the video for black gold sights. I noticed theres an option that says inch. The black gold rail is really small compared to my axcel

If we come in to the shop can you help with getting the correct sight tape? I am going to the Hoodoo NWMountain Challenge and right now my tape isn’t correct. If I am shooting anything past 60 it is dropping.

Hi, my name is Rod, and I'm from Australia. I recently purchased a high-end target bow upon set up I found the actual draw length to be 3/4 of an inch shorter than the cam setting is this normal or do I need to do cable and string length adjustments to get them to match? I guess I'm really only concerned because if I want to sell it in the further I can't sell to anyone with a 30 inch plus draw because I'm at 30 to get 29 1/4. Thanks for any advice cheers

What do i select for sight type if i have a hha and its not on the list

How do you know your chrono is more accurate than the program

l as anyone has issues with Archers Advantage recently? My card was charged but never received an email for access... not in spam and no return email from the author...