LIKE COMMENT AND SUBSCRIBE MUSIC : / @vlognocopyrightmusic
Пікірлер: 85
@rodneyhowell27035 жыл бұрын
Watching your videos helps me alot.thanks sam.
@sprucegoose10164 жыл бұрын
I cant wait to get a fass and install my self. Thanks for doing these kinda of videos bud 😎
@Badassbowtie755 жыл бұрын
Very nice. I subbed after I watched the first vid I seen from you. I stumbled upon your vids while looking at vids of 3rd gen 6 speeds towing. Nice job, keep up the good work.
@VBELTandSON5 жыл бұрын
Timothy Smith thank you I really appreciate the support!
@marcusLT11 күн бұрын
I just bought a 2001 3500, and it's in the shop having a fass lift installed this week. im excited it had set for a while, so the tank was full of water and allgie. It's getting r&r cleaning with fresh fuel, and hopefully, it will be ready to go.
@jameslundy705 жыл бұрын
I put my Fass fuel system on my 99 2500 15 yrs ago and have not had a once of trouble out of it. I do like the new fuel fittings they put in the kit., The old ones were a bitch to push up all the way.
@grasscutter882 ай бұрын
Fleece makes an upgraded sending unit that allows you to connect the 1/2" hoses to the fass system. Wish I would have known this before I did the draw straw.
@vancedorash86554 жыл бұрын
Vance here I have a 2000 dodge 450k.. run 2 carter electric pumps one by tank other on engine stock place..27psi fuel preasure never had an issue
@wesleemillerАй бұрын
Great video.
@pvtwillward3 жыл бұрын
I have been looking to do one of these on my 05 what would you say is the hardest part other than making sure you don't get debris in the tank?
@michaelwells87202 жыл бұрын
I’m getting ready to install my FASS on my 96 5.9 12 valve Cummins diesel. My question is, what am I supposed to do about my manual lift pump, do I cover the hole where it came out or just leave it in? I’m sure you going to say take it out or it’ll fry the manual pump but the question remains. When I pull it does anybody make a cover plate or do I make one myself?
@hey_youtubeim_back21593 жыл бұрын
Oh yeah. Great video! My 3rd gen has a flat bed too. Was wondering where I would install my pump
@matthewsnyder6028 Жыл бұрын
Over all nice job
@jorgeangulo42113 жыл бұрын
Yes my question is by installing the fast system this delete the in tank pump and what happen with the supply line from the stock pump
@rickysimpson983 жыл бұрын
Is the Fass pump run all time I took both my ground cables off to weld on my exhaust pipe when I hook the battery cable up and turn the key on the pump wants to run out of time on the fast flow pump I just got to Truck had one of those fast flow system for so my question is does the pump supposed to run all of time when the key is on and not running
@ELPATRON8394 жыл бұрын
What’s the difference between 165 & the one you mentioned he was going to get ?
@cowboyranchlife93704 жыл бұрын
How much did it cost and does it let it truck smoke more?
@1BigCountry1434 жыл бұрын
I bought a 2005 Dodge Ram 2500 w/ 5.9L cummins and it has the Fass system on it. I've never had the Fass system before it seems kinda loud! Is that normal? Thanks, great video.
@johnallen99923 жыл бұрын
nice.. mines a 2007 5.9 6 speed dually extended , 4x4. 168K .. Fass is recommended .. fuel polishing .2 microns.. can save older injectors. i wish u guys could install mine.. Dealers.. I dont trust em an inch.. prob have plastic shavings in my tank
@pasttime84503 жыл бұрын
I have a 1999 dodge 3500 is that the size i should go with its stock 5spd trans
@WyattSmith-pu6jm7 ай бұрын
Do they make a blank you can install and remove the factory pump?
@jayroandrade26172 жыл бұрын
I have a question is that sound at 11:46 seconds is it the pump or a compressor? I have a pump and it doesn’t make any sound
@adamropp88325 жыл бұрын
Great video! What year was the truck? I have an 06 mega cab. Does it matter which Fass number for install?
@adamropp88325 жыл бұрын
Any chance you will be installing a fuel pressure gauge and or a rail pressure gauge? Sweet set up!
@925KrazzyP Жыл бұрын
Where did you buy that full kit?
@korniliykhripunov39625 жыл бұрын
How do u bleed the system
@chriscollison9334 жыл бұрын
Hey I have a dumb question. I bought my 06.5’ 3500 with a 5.9er and it had a Titanium 150 on it but the harness got messed up so I’m in the middle of replacing but was just making sure I’m getting the electrical hook ups right and I noticed you said you spliced into factory wiring over top of tank so I’m wondering what you meant? I should t need to drop the tank just to replace the harness right? And thanks for the vids and love the music super cheerful lol!
@VBELTandSON4 жыл бұрын
I think I was talking about adding wire to make it longer on my 5500. Fuel tank is in the back. Stock wire wasn’t long enough
@julianfish21733 жыл бұрын
What fuse did you use
@adamropp88325 жыл бұрын
Pressure gauge?
@hey_youtubeim_back21593 жыл бұрын
Kinda like the old way of hooking up the draw straw and return line. New style has ya drilling holes in the old pump housing. There is a bit of prep involved there.
@madman4320005 жыл бұрын
I know this is a year old but just wondering about leaving the stock in tank pump assembly installed, is it available in an emergency like if the FASS unit dies? Would it just require a couple fuel line swaps to use? I thought I saw an install vid where they gutted the stock fuel pump and installed the draw straw in that assembly? Mine is a 2004 so no in tank pump assembly and I think that was an option at one time to retain the stock lift pump along with the FASS system Just In Case....
@chances.32384 жыл бұрын
Honestly I don't want to use my stock sump pump, and you'd have to change wire plug ins and fuel lines to reuse, plus reuse old main fuel line from fuel tank to the motor, not worth the time. Also, you shouldn't have any issues out of the FASS 165, iv got mine on my o6 cummins. It works great and could tell a difference after it was installed. A little more mpg, smoother idle, and a few other things
@JulioHernandez-xk7np3 жыл бұрын
Do you need a new starter for this? You'd think theres more demand on startup with this pump or am I wrong?
@westonbryant6073 жыл бұрын
What makes you think you would need a new starter?
@kyleinman80174 жыл бұрын
Does this completely delete the factory pump? Thinking of doing this on my 2015 gmc to add extra filtration.
@andreined84632 жыл бұрын
Nobody replied so ill do. No you dont have too. Never did on mine. Triple filtration
@andrewsmith99802 жыл бұрын
I bought a fass pump probably 10 years ago. I thought that these were installed inline. I believe that mine is different it didn't come with a pickup tub
@VBELTandSON2 жыл бұрын
Different yeah model truck maybe
@kurt89862 жыл бұрын
U notice a difference right away?
@johnvineyard672 жыл бұрын
only one hose goes to inj pump ? what about other banjo line going to bottom of orig filter ?
@VBELTandSON2 жыл бұрын
Factory return line is still used
@venomfastback3 жыл бұрын
I have a 2006 5.9 Cummins with Smarty S on level 9. I am running out of fuel....with this lift pump be enough or do you think I need to get the bigger one? Thank you
@VBELTandSON3 жыл бұрын
This lift pump is over kill for Just tuning upgrades. It will be plenty
@venomfastback3 жыл бұрын
@@VBELTandSON thank you! Great video. I'm going to use it to install mine
@andreined84632 жыл бұрын
I bought fass 100. Its good up to 600hp. Had 165 on my second gen work perfect. Truck had edge tuner. On my 07 installing 100.
@tjdraman26165 жыл бұрын
Is this too much pump for a stock 5.9?
@VBELTandSON5 жыл бұрын
TJ Draman naw what ever it doesn’t use just goes back to tank anyway. Good upgrade for any truck stock or not
@Frankstgeorge882 жыл бұрын
How has it held up? Can you put too big of pump on?
@VBELTandSON2 жыл бұрын
Running strong
@andreined84632 жыл бұрын
Fass 100 is good up to 600hp. If you not gonna run pass that 100 is good. 165 is no problem either
@shaquillebennett96123 жыл бұрын
Any updates on the fass 165G ??
@VBELTandSON3 жыл бұрын
Still going strong
@ManInTheBigHat5 жыл бұрын
I'd like to know the results. Any better mileage? Power? I've got 2001 RAM2500 and I want to install this system.
@VBELTandSON5 жыл бұрын
ManInTheBigHat my dad has an 01 3500 with a fass installed. Truck sounds a lot healthy with the fass installed. No air bubbles and cleaner diesel. Idk about power but it’s very well worth the install. I recommend it. Especially for a 24v. Safety for if the stock pump drops. Protect your vp44. Dad only has a 95gpm. More than enough. Has a fuel pressure gauge instal to monitor it working. 👌🏻
@davidbottles72985 жыл бұрын
ManInTheBigHat I have a Fass 150/150 on my 2003. Power is better because it has full supply of fuel pressure of about 14.5 psi. Stock pump will drop to about 2.5-3 psi at WOT. So less throttle to get the job done= for me about 2 miles per gallon better mileage. Is worth every penny. You want to protect your VP44 injection pump.
@WyattSmith-pu6jm7 ай бұрын
Much easier with a flat bed I'd say haha
@jasonbrinkmeyer54005 жыл бұрын
How long does the install take
@VBELTandSON5 жыл бұрын
Jason Brinkmeyer 3-4 Hours if all goes well
@jasonbrinkmeyer54005 жыл бұрын
@@VBELTandSON awesome thanks. I was thinking of going on and running the wiring today then waiting and doing all the fueling another. That way I can break it up and not be down as long. Dont think the wiring will take 20 min though lol.
@VBELTandSON5 жыл бұрын
Jason Brinkmeyer yea wiring is simple. Take more time to zip tie it up safe. Hah just be sure when you cut the hoses that you only use just enough per section they don’t leave you much room for error
@jasonbrinkmeyer54005 жыл бұрын
@@VBELTandSON any other tips?
@VBELTandSON5 жыл бұрын
Jason Brinkmeyer clean off under the truck best you can so you ain’t getting stuff on your eyes hah
@payattention84735 жыл бұрын
Why no sump?
@VBELTandSON5 жыл бұрын
Pay Attention sump for highway trucks. No sump because he drive thru the woods and off road. No point in adding something that a stick could rip off and ruin your day
@payattention84735 жыл бұрын
Absolutely. I saw some more of your vids... Mine is destined to be a pavement princess, or as I like to think of it, a Highway Star...
@brianhind61492 жыл бұрын
The annoying music detracts from your otherwise excellent video.
@nicholasplesko5334 жыл бұрын
Install
@davelosonczy15375 ай бұрын
Go Trump
@nicholas_hoaglan_21575 жыл бұрын
your going to have the worst 1/4 tank issues... maybe worse
@VBELTandSON5 жыл бұрын
hmm haven't had any yet:/
@nicholas_hoaglan_21575 жыл бұрын
you need a fuel pressue gauge then I bet once you start getting below a half tank your lift pump pressure will start fluctating and once down to a quarter it will start eading zero. You wont feel your truck start cutting out unlesss your lift pump pressure gets real bad
@nicholas_hoaglan_21575 жыл бұрын
you need to modify your fuel module and put your draw straw to suck out of the module... Our trucks have a ridiculously long skinny tank and sucking out of the module will keep the straw in fuel even when all the fuel sloshes away from the pickup. Trust me get a fuel pressure and rail pressure gauge your cp3 will thank you
@VBELTandSON5 жыл бұрын
Nicholas_ Hoaglan_215 have a fuel pressure gauge. Just ran down to the red on E no hip ups on fuel pressure. Why you thinking there should be an issue?
@nicholas_hoaglan_21575 жыл бұрын
Also if you wanted todo it the way your doing it you should have left the tank mounted lifted the bed and left the tank full of fuel cus the bottom of the tank sags down a couple inches with fuel in it. So i bet your daw straw is litterally inches off the bottom all bad...
@6speedotto8503 жыл бұрын
OMG the music is terrible and loud. I went to another video because is is so bad.
@VBELTandSON3 жыл бұрын
Sorry editing skills weren’t that good when I started. Sorry otto
@thewheelieking40852 жыл бұрын
Wow really!😂
@seabassgt7998 Жыл бұрын
man i wish i could stand this gay music to finish the video
@VBELTandSON Жыл бұрын
Leave then. Was not easy finding any music at the time that didn’t have copy right claim. Good bye.