Install a BIGGER / PERFORMANCE Throttle Body At Home! DIY St150

No video

Install a BIGGER / PERFORMANCE Throttle Body At Home! DIY St150 - 60mm

Рет қаралды 42,988

4 жыл бұрын

Hello! thanks for Clicking the Video! :) Why Ford Why???????
In this video i will be showing you how easy it is to install/fit and or change to a bigger Performance throttle body onto your "Ford Fiesta Mk6 St 150" at home this truly is a DIY task, I will also discuss the benefits to go along with it. If you go onto the st forums one of the first things you will come across is getting rid of the "restrictive" air box in replacement of a cone style air filter the reason for this is for "heat soak" trapping the heat within the air box unit and how restrictive ford has designed it. Along with better heat dispersion it should greatly improve throttle response since it does not have to travel around the engine bay! The reason behind this is the "Mk1 FOCUS 170" was the bigger brother of the St150 and if your charging more money for a car that slower or the same speed it dont make sense!?!
TAKE A LOOK FOR YOUR SELF!!!....
st 150 Forum (Air box)
fordfiestast.co...
THROTTLE BODY LINK:
www.ebay.co.uk...
Subscribe!
/ @kyracing8902
MY CAR MODS:
*Removed back seats
*Sport catalytic Converter
*Bigger Throttle body - 60mm for a 2.3 Liter S-max
(Stock - 54mm)
Michelin Pilot Sport 4
Potential future mods, videos.
Performance exhaust Toyo sport, Puma Speed, Milltek, Mongoose, full exhaust and manifold.
Modifiy Standad Mk6 Ford Fiesta 150 Intake Manifold
(Better than paying £800 for Cosworth intake)
Stance Plus + Performance Coilovers -
Corner weight
Correct toe IN. 5*
Wheel spacers to get correct fitment something Ford should of thought of!
Semi Slick tyres - Nankang Nsr2
p.s thanks josh on facebook!!

Пікірлер: 37

@kyracing8902 4 жыл бұрын

UPDATE* I will be doing an update video on the throttle body, quick run down high rpm seems to have more poke above 5500rpm, feels easier to heal and toe (rev match) the throttle feels ever so slightly lazier low in the revs sub 2500rpm but this was only after a 40 mins drive under different loads this might not be run in correctly yet or this may be how it is 🤷‍♂️ the car is not mapped and don’t intent to map the car but the INTAKE NOISE is worth the money alone! 😂I am no racing driver this is my opinion. This is a £44 throttle body from eBay it’s a cheap quick modification to do to your car there are no fault codes, just be aware of the internet hating it even if you like it it may add horsepower it may not its all depending on what you want from the vehicle which I have gotten from my car. Modifications play a big role: intake manifold/cams/ exhaust/ tuning etc. A good source is puma speed and similar well known brands for ‘fast fords’

@JasonSmith-nv6qz 2 жыл бұрын

I like your style. Instead of fixing the break line. Add more POWER. English version of roadkill. Good vid mate.

@pdtech4524 Жыл бұрын

I think if you put a tube with around 75⁰ - 80⁰ bend in it, so it brings your cone filter further forward, it should help give slightly better gains. All the tuning videos I've watched with inlet/throttle body/cone filter mods, trying different setups, ie no pipe vs straight pipe vs bent pipe etc, oddly the bent pipe gives max gains. 👍

@peteturner4535 4 жыл бұрын

Great editing there fella good vid 👌

@DriveWithAndy 3 жыл бұрын

Great to meet another ST150 KZfaqr. This is a good mod but i want to go for more torque then bhp when i come to my mods so thinking to stay with the standard TB. But will get a Fusion Fabrications Inlet :)

@Vredeopaard 8 ай бұрын

Is a option , not bether to take a fusion am a trotlebody in combination??

@shadows4775 2 ай бұрын

Standard tb with induction kit gives better gains in torque. Bigger tb is more top end less torque. You get better compressed velocity air with standard.

@trickym5748 3 жыл бұрын

I replaced mine with a bored out standard ford throttle body 👍

@wiciuwiciu2783 Жыл бұрын

Great video, but how could you measure internal diameter with calipers 100% properly. Just to do it 100% wrong just next!

@BrokenString15 4 жыл бұрын

When will you be doing the brake line video bud?

@EvolutionGamesWales 3 жыл бұрын

You won’t get any gains on standard set up u just get the placebo effect. Only need a bigger TB if u have an inlet manifold an NA st with an inlet mani will lose down low torque so really unless you also gonna turbo or SC it not worth doing

@normanpitkin8780 3 жыл бұрын

Are you saying a standard ST150 will lose some BHP if you fit a 60mm throttle body ?

@EvolutionGamesWales 3 жыл бұрын

No mate you won’t lose horsepower it just won’t do anything putting a larger bore throttle body on the standard inlet manifold does nothing as even though the bigger TB let’s in more air it has to go through the standard bore of the standard inlet manifold so there is still a restriction there hence no real gains. The only reason to put a larger TB is if your putting on a bigger inlet mani like a cossie inlet manifold for example. The problem with that is although with the right set up of supporting mods with a performance inlet manifold you will get around 200bhp but they lose torque down low. I have a mate with the MR200 kit on his car and even he told me to stick with the mr185 if I was to buy a kit as he has lost torque. So unless you supercharge or turbo charge the ST there any a lot of point to doing it

@jasonhobbs5611 Жыл бұрын

Hi mate, I've got a st150 ots had a load done to it including cosworth plenum, K&N filter, 4 branch manifold with a full exhaust system, I have a rolling road print out 200bhp I will have to check what T/B is on mine now if its stock I'll order a 60mm and see if it makes a difference.

@zestydbd6830 10 ай бұрын

@@EvolutionGamesWaleswill have to disagree on that one. I've got a larger one on my car and the difference is night and day.

@Vredeopaard 8 ай бұрын

Is it a good mod mat i have a scorpion excaust from manifold an cat an catback , an a mountune airfilter

@harrytee7762 2 жыл бұрын

Great video mate. thanks for sharing 👍🏼

@jasonsamuels5845 3 жыл бұрын

So you did not had to reset the ECU or anything like that?

@EnZelloT 3 жыл бұрын

You just turn on the ignition for 1 to 2 minutes then the ecu know on wich position the throttel body is

@anthonyc2456 2 жыл бұрын

Hi at the moment I only have a standard set up for my fiesta st150 would this still fit anyways? Many Thanks

@markbeard3871 4 жыл бұрын

Is it still running ok that's very cheap for a throttle body

@kyracing8902 4 жыл бұрын

Yes working perfectly no fault codes or any problems 👌

@philgroundwater2859 3 жыл бұрын

Hahaha you washed the air filter with your dishes ffs! 😫

@ashb9319 Жыл бұрын

I’m triggered by this whole video so far especially when you start revving it instantly N08H34D Lol all that to then put a warm air intake k&n filter on 😂😂😂😂😂😂 no clue what so ever

@ragensf 4 жыл бұрын

How does the car run after this? I’ve heard a lot that after the upgrade you need to get it mapped in?

@kyracing8902 4 жыл бұрын

All's good I will keep you updated of any changes yes the correct thing to do would be to get it mapped on a rolling road, I wouldn't recommend remapping with only the throttle body have some supporting mods e.g k&n air filter cone, the standard air box it bad for heat soaking and therefore losing power. 👍

@rreynz5460 11 ай бұрын

what benefits does a "performance" throttle body give compared to stock, just increased air intake due to larger diameter intake

@luigigalasso9356 3 жыл бұрын

esiste anche per la s mk6 tdci 1.6

@Joey-pi5sq 3 жыл бұрын

I have a pre-facelift st 2005, will this throttle body fit right on it? No mods

@TheKrystiano91 3 жыл бұрын

Yes it will, intake manifolds are the same pre and after facelift.

@BIG-DEE-EASTMIDDZ 2 жыл бұрын

feel any diffrance

@EartAlienEB1 3 жыл бұрын

You did not let ecu self adjust and calibrate the new tb

@kyracing8902 3 жыл бұрын

Wasn’t show in video

@ashb9319 Жыл бұрын

Lmao the people putting cone filters on thinking they get better air feed air flow and colder air need a slap.

@alimunns 7 ай бұрын

That type of cone filter 💯. Enclosed induction kit cone filters will gain. But it's very minor gains if any. People mainly do it for noise tbh. Unless its a turbo car then it'll gain a fair amount of power with open cone filter and heat soak doesn't matter as much either. I'd also argue their car their money. Also mk6 ford fiesta is only worth about 20 quid in all honesty anyways. so why not throws bits in the bin and replace it with cheap mods.

@trickym5748 4 ай бұрын

Have you seen how restrictive the standard air box is? It’s you that needs a slap 🤣