Install LED Lights on OMTech / Chinese Laser 2023

Рет қаралды 4,863

Күн бұрын

Installing LED lights to your CO2 laser is one of the most inexpensive and easiest laser upgrades to complete. If you plan on creating content with your laser, having optimal lighting is key. When ordering LED lights, make sure you're ordering the proper voltage for your power supply. OMTech lasers are 24v.
🚨My Links:
24v LED Light Strip: amzn.to/3rXxo1v
Alternative LED Lights: www.laser-guys.com/upgrades
Cleaning Cloth: amzn.to/3QodLsO
Wire Caps: amzn.to/4073hkO
Wire Stripper: amzn.to/3s3wu3x
Screw Driver: amzn.to/46CLfte
Scissors: amzn.to/3FrGeaT
Amazon Store: www.amazon.com/shop/edmonds_w...
🚨My Discounts:
5% Discount Code for OMTech Lasers: LASERGUYS5OFF
5% Discount Code for American Photonics: LASERGUYS
5% Discount Code for LightObject: LASERGUYS
5% Discount Code for PiBurn by Lensdigital: LASERGUYS
🚨Need Help? Join my social groups below:
Facebook Polar Users Group: / 573428424122143
Facebook Offical OMTech Group: / 1364016877267714
Instagram Page: / edmonds_woodshop
www.laser-guys.com/
🚨Business Inquires:
Email: Edmondswoodshop@gmail.com
Affiliate Disclaimer:
As an Amazon and OMTech affiliate, I earn from qualifying purchases if you choose to use my links listed. I will continue to provide honest and helpful tips ands tricks with the products that I used. Thank you for your continued support

Пікірлер: 36

@silverstacktician5065 9 ай бұрын

Thank you very much, I just got same (exact) machine and was about to do something much more difficult. You helped tremendously, going to finish it now.

@EdmondsWoodshop 9 ай бұрын

Glad it helped!

@jtom8888 8 ай бұрын

Thank you Cam for the detailed video. I am doing this upgrade. You made it so easy a caveman can do it.

@thenuttybowler 9 ай бұрын

Great video dude. I just got my 100w in and the lighting is bare, so i need to upgrade and this is exactly what i need to do. Thanks!

@EdmondsWoodshop 9 ай бұрын

Its SO easy to do too. Took me longer to record the video than it did to do the install. Good luck and post if you have questions.

@danielleneidig8610 4 ай бұрын

I just added the lights to my new laser... Your video was extremely helpful. Keep up the good job!

@EdmondsWoodshop 4 ай бұрын

Thank you!

@slider2267 3 ай бұрын

Excellent video. My laser comes this week and I ordered the lights and will install them when it gets here.

@EdmondsWoodshop 3 ай бұрын

Be sure to check out our OMTech users Facebook group and our setup guide on laser-guys.com/setup

@MikesLife87 4 ай бұрын

Definitely, my next step

@EdmondsWoodshop 4 ай бұрын

Well worth it. Keep in mind you don’t have to plug in where I did. You can use any 24v spot

@MikesLife87 4 ай бұрын

@@EdmondsWoodshop sounds great. Thank you so much for the information.

@SuddenImpact53 4 ай бұрын

I wish it was this easy on the 130 watt. I do not have the front framing that you have here. I thought about going on the lid but decided against it. I am also installing a dimmer.

@EdmondsWoodshop 4 ай бұрын

My way is just A way. Not necessarily THE way. I’ve seen people mount on the lid and then wire down to wherever there’s a 24v power source.

@dalekrech3904 2 ай бұрын

I used all of the suggested materials on my Omtech 60 watt machine and it worked great for a couple of hours then my DC power supply overloaded and died. Omtech used a 7amp power supply. I ordered a 25 watt unit on amazon and I'm back up and running. I'd be a little careful with this.

@nightravenglobaldefensegro6669 7 ай бұрын

What gauge wire are you using?

@JeremyClow 3 ай бұрын

Please send me your address so I can send you a MUCH better set of wire strippers. That's the least I can do for all of the help you've provided all of us owners of OMTech lasers 😉

@EdmondsWoodshop 3 ай бұрын

😅 hahah you don’t like my old strippers?!! lol

@DextarRogue 8 ай бұрын

Is the link in the description the actual LEDs you used? The ones linked in the video description head to a warm white (3k) and the ones you have look almost white (6k). Just want to make sure before I order!

@EdmondsWoodshop 8 ай бұрын

I just checked and they’re NOT the same. These are the ones I used but show currently unavailable. Keep an eye on it as it occasionally shows up a.co/d/54ZLDA9

@jamesfacciolli8061 9 ай бұрын

Is there a "recap" for the end you cut off of the led strip or how is that connected if you want to use the rest for something else? Right now I have a 12v "plugin" self stick that works but these seem a lot brighter.

@EdmondsWoodshop 9 ай бұрын

If you have a 12v LED that plugs into a 110 outlet, it won’t work. Needs to be 24v. My LED light strip didn’t come with a plug. The ends were bare to begin with. Some 24v led light strips have plugs with adapters on the end. Those simply need to be cut off and spliced into another wire like I have shown OR you can use an outlet

@jamesfacciolli8061 9 ай бұрын

Ok able to get in the shop today. As for my above question I meant a "cap/connector" for the left over leds on the 24v. I can figure that out down the road no biggie. As for connecting into the 24v plug. is it ok to connect it directly to the outgoing area? I dont know how to (or if I can post pics) its just my 24v plug (green thing) has all that glue on it. But it directly connects to a panel below it. Want to know if I could connect it to that following the same wire scheme (red/blue-black to red blue/black? @@EdmondsWoodshop

@jamesfacciolli8061 9 ай бұрын

I posted the pic in the FB group and tagged you.

@jamesfacciolli8061 9 ай бұрын

ok yeah to add on.... the light thing comes with a 24v plug adapter. So essentially i could hook it up to a 24v Power brick with a switch on it also.

@EdmondsWoodshop 8 ай бұрын

@@jamesfacciolli8061yep just looked at your picture. It’s good to go since it’s a 24v slot and ground connection.

@dalekrech3904 3 ай бұрын

Is there a possibility that adding these lights would overload the 24 volt power supply? I installed the same thing you did and a day later the power supply was toast.

@EdmondsWoodshop 3 ай бұрын

As long as you added 24v leds and not 12v LEDs (which is a common mistake) then overloading from the LEDs is highly unlikely.

@martinduffy3835 6 ай бұрын

Just a thought, but why did you not just disconnect the light on the laser and use that wire ?

@EdmondsWoodshop 6 ай бұрын

I actually have another LED install video where I did just what you asked. However, on this particular model the light is under the moving gantry and if I did this then I would not only be taking away additional light, but I'd have to remove and route wiring anyways since its on a moving rail.

@martinduffy3835 6 ай бұрын

its funny but i just upgraded to a 130 watt 35x55 laser and have to do it just like this. only prob is I have no place to put the lights on the front. Oh well 3 is better than none. so thanks mate lol

@bobfontaine3976 6 ай бұрын

Bought your kit and the end result was the laser would not home and only move forward and backward. Any thoughts?

@EdmondsWoodshop 6 ай бұрын

My kit? Are you part of our official OMTech group where you can post a video of what you installed and what’s occurring? If the left and right movement is not working then that has nothing to do with the LED lights. That’s your X axis movement. The x axis stepper motor is controlled by a driver. Are the driver plugs fully seated?

@bobfontaine3976 6 ай бұрын

@EdmondsWoodshop Bought the LED lights from the link in the video and attached to the 24v plug in the video. That's when the problem started, disconnected the lights and everything went back to normal. Traced the wire from the light back to the 24v power supply and attached there, same result. Recently purchased 24v plug for the lights to plug in the wall. Thank you for the response and I'll check the connection you refer to.

@meld9556 5 ай бұрын

My laser did the same thing after install - my x-axis didnt work until I completely disconnected the LED lights @EdmondsWoodshop@@bobfontaine3976