Download file in here: link1s.com/zKzIZPj Link Backup: link1s.com/okfw5eh Pass: Onlybim Update 0: The first thing you need to do is temporarily disable Reatime Protection in Windows security, before unzip the file Update 1: Please run dControl before install, to disable Windows security Update 2: In case you want to install LUMION on a drive other than drive C, please change the drive name in the setup.txt file and rename it to setup.cmd. Then copy the cmd file to the Setup folder and install as usual drive.google.com/file/d/1ZYlfLIug0WR2L4J1veXrgPO8yJHeT9_j/view?usp=sharing Update 3: Please see this video, to know how to install Lumion 2023 on drive D/E/F kzfaq.info/get/bejne/p8ypjZiQuMqvnZc.html Update 4: If you have this error "General connection failure Hosts file entries detected "" PLEASE WATCH MY VIDEO CAREFULLY " Delete the previous line block Lumion in your host file"

Sos un genio amigo! Si alguno cae en este video de Agosto 2024 en adelante y necesita ayuda, me avisa. Lo pude instalar y corre 10 puntos.

Why we need copy folder lumion from C/program file to Driver A.

works perfectly, sending love from Jamaica, thanks

you're the boss man, i've waiting for this the entire week. MASTER.

do you have another download link, it says too many users have viewed or downloaded

i installed and the entire program runs the benchmark everything Ok. When you open a new project or an existing one, it closes without any warning. Any solution?

Windows cannot find 'C:/Program files/lumion2023/various/Redist2015-2022/vc_redist.x64.exe.make sure you typed the name correctly and then try again. Plz help.., this message again and agian

Is this patch works with lumion 2024 or only 2023?

Hey, I can not download the file. Can you send a new link ?

Is there any solution to the “No Internet Connection” display message on starting program? I follows all the steps correctly. Please Help

doesnt work for me, they ask for an activation code even after blocking conx from it

when I do cmd installation it extracts my files and does not install at all and when extract finishes I'm getting "vcredistx64.exe" file was not found msg

Thank you! You doing god's work 🔥🔥

The link is not working, Do you have another link?

is it okay if I install and use Lumion in C drive or is it necessary to copy paste installation folder to other drive ? like you did in A drive

I have problem when setup lumion enter your activation code ????

thank you.Keep it up👍this has worked

The link redirects me to a page where I cant even find the file to be downloaded. What to do

You dont explain the part of the Lumion (A) directory...

Thank you so much, it works perfectly, you just need to follow all steps carefully.

I've done everything in this video but the software says liescnce invalid. Can you help me with that? Thnaks

Hi! Followed the steps but when I create new environment Lumion closes. Anyone?

the links provided for download files and link back up doesn't work!!!!!!! it send me to financial website!!

HI, Please tell how to in stall in a different Drive, other than C?. I dont find that "setup.txt" file from any of the folders that i downloaded from the given Google drive link. Thank you

Hi Sir where I can download the files because there's a message showing up that the file on the recent link exceed it's download quota. "Too many users have viewed or downloaded this file recently. Please try accessing the file again later. If the file you are trying to access is particularly large or is shared with many people, it may take up to 24 hours to be able to view or download the file. If you still can't access a file after 24 hours, contact your domain administrator." Please help need to Install it badly.

22/4/24 FUNCIONANDO! desde argentina, realice el tutorial al pie de la letra, pude renderizar y guardar imagen sobre un modelo que ya traia el programa, no se cerro ni tiro error. DETALLES: movi la carpeta lumion al escritorio ya que no tengo otro disco para hacer como en el tutorial, ademas en el archivo host no aparecian las direcciones o el texto que aparece en el video.

I installed it. for the life of me I couldn't understand him. At least have a proper subtitle. After installing from cmd, there were more steps but I couldn't follow since I could not understand him.

Thanks! I’ve been able to install it but any time I open it without connecting to the internet it does not open…can anyone help me out??

I’m having the same problem downloading the file, it says that too many users already downloaded the file so I don’t have access, can u send a new link pls?

i finally did it but the program never opens up. and theres no lumion hosts at the Hosts txt file in etc

its work but just remove hosts file in video@ 2:01 out of that folder don't delete it because maybe it important

Hi I already had it installed but cannot import a model why? It always says error importing model

is working... tq sir...

good day sir. cannot delete Host file. i saved the program at D. due to lack of space at my C.

that's great and very useful 👍

even though my laptop has access to internet, there is still a prompt upon startup that says "no internet connection". what can i do about this

in my one it is ask activation code, how to fix it, pls let me know how to install without activation code

Hi, I try to download many time but it can't. Need to contact your domain administrator. Please help. Thanks

Hallo I have an issue please reply on my comment I did everything like you and the program is installed but when i open it it doesn't open it runs in the background of the windows only Please help me i need it for my work

Hoje 14-04-2024, Desativei o Windows Defender, fiz a instalação pelo CMD, limpei o arquivo de HOST e apliquei o Patch . Tudo funcionando 100% Works. Thank you so much Congratulations from Brazil 🤩

the link dosnt work anymore, there any chance that you can help me with that

you are the best, thank you so much👏

Pra quem é brasileiro.. Pode ir sem medo só fzr a msm coisa do video que funciona sim 100%

Thank you so much! Everything works perfectly!

my disk C is almost full, there is another way to install directly to another disk ?

i installed the program lumion 2023 and when open a new project or an existing one, it closes without any warning. some any solution?

Hola, el enlace no funciona, ¿podrias actualizarlos? Muchas gracias de antemano

not able to install fully from cmd..process it stops at around 40 percent

how do i fix, your license is invalid after opening the program

hello When i go to link it shows error 522 connection time out can i please get diirect link so i can download it plese help

Hi ! thank you so much for this video ! Question : When you do the first CMD, have you already unzipped the file? or is it in the unzip folder? Because when I'm in WINRAR, I can't do the CMD command.

Hi, I am following the steps exactly but every time I try to open the Lumion it's saying invalid license. can you please help? is there any other solution?

i did everything but the patch isn't cracking the application... its still asking me to go online

Do i need internet connection to access Lumion startup? Because i disconnect the internet so i use it safely And on the first run... it says... "Lumion cannot connect to Internet"

Thank you very much, I install it correctly, but I get the message: "General connection failure Hosts file entries detected" and lumion doesn't open. How can I solve it?

ناجحة 100% تم تجربتها الآن

Hello. I have installed as you suggest. The program start and work ok. But there is strange problem. The lumion doesn't save project after program was closed, the model and textures are not saved. After Archicad is opened and Livesync is on, the model become updated but textures not. I looks like saving not working proper. I have tryed different way but result is same. not saving at all. Please help me. Thanks in advance

Hi! thanks for your resources and time. Although it looks like these links dont work. Do you have another link for the patcher?

I cant instal... when i open cmd and type "Lumion\Lumion_2023_4_2_Download.exe" then click enter the instalation window come and ask me password i do all evrythink what you do in this video but its do not work

Thanks A lot 😊

I installed it using the command line "Lumion_2023_4_2_Download.exe -s", but in cmd only show a few row line text so fast in new cmd window twice appeared and then closed itself, unlike the video which shows the installation process which is quite long. can anyone help me, why is this? thankss 🙇‍♂🙇‍♂

Links bad. Click on sponsor and captcha nothing works. Fully cheat

Me funciono muy bien! Solo hay que seguir bien los pasos. Ahora si a crear unos renders fregones

I installed the software perfectly. Thank you. Last question is it safe to close the program even if the internet is connected?

Not working bro. No internet connection. Help Quit😢

Sorry, you can't view or download this file at this time. Too many users have viewed or downloaded this file recently. Please try accessing the file again later. If the file that you are trying to access is particularly large or is shared with many people, it may take up to 24 hours to be able to view or download the file. If you still can't access a file after 24 hours, contact your domain administrator.

Hello, Lumion crash when i try to use ray tracing, you know how to fix, i have rtx3080ti. Thanks

Thank you very much! 🙂

I installed it correctly and it opens normally, but when I start working it closes by itself, can you help me, thank you

You really messed up everything by clicking here and there by the way good job

Hii, in cmd at the end it shows sub item error..... After open the lumion it shows no interest connection... Pls help

u the best

when i try to run the crack it says "this app cant run on your PC", even when im running it as admin. What to do?

its not downloadable now, can you comment another link.

Thanks a lot for the video! My Lumion is working. Although I wanted to ask, if there is any way to make run without internet? As its not working without internet currently.

bro help me pls!!!, i was using lumion 2023.1, then I uninstalled that version & after this i am trying to install lumion 2023.4.2, But it is asking for activation key after clicking on setup, pls help me

Hello, Thank you! The installation went thru! Only thing it now says /license is invalid/

both download links not working :(

APRIL 10, 2024 WORKS PERFECTLY

i setup , but error showing run time like ( No internet Connection ) this is problem , i chk host there no have any line server ?

it says invalid activation code

is it the same file as the one from filecr? if yes your methode didn't work for me. from where did you crop the file to which location?

Setelah instal lumion. Dan saat menjalankan lumion internet on. My lumion saat internet off tidak bisa bagaimana cara mengatasinya

ACTIVATION CODE SEND

Can you upload the file on other server please and give us an other link please, it's impossible to download it, the link is broken

Hi. Livesync Archicad work this version or not?

i have no internet message displying each time

thanks men

my lumion says no internet connection on startup and wont work even tho im connected to internet

hello. Not yet lumion 2024 crack?

hey man i download it in another folder in D to be specific but when i go to delete the hosts in local disk C it doesnt have the last rows of the lumion IPs man what should i do about that? please help

The file (Lumion_2023_4_2_Download.014) is damaged so after decompress that archive is missing. Any solution ? Greeting by the way also if you could explain more clearly how to change the drive for the installation

Why did you copy it from disc c to disc a?

Hola! El link ya no funciona, se ha sobrepasado la cantidad de descargas permitidas...

Bro why is performus is worst in rtx 3070 intel i7 14700k worst performance

updated link please. thankyouuu🥰

Hey Thank you very much for the video, could you please share a new link so I can download the file? For the current one it says that too many people have viewed and/or downloaded it and I can't download it... Thank you in advance! :)

Download file link is not working , may you please make another one?

I can't download from google drive, help me